[PATCH v2 3/4] mfd: dln2: add start/stop RX URBs helpers

[Octavian Purdila]

This is in preparation for adding suspend / resume support.

Signed-off-by: Octavian Purdila <octavian.purd...@intel.com>
---
 drivers/mfd/dln2.c | 51 +++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 41 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
index 6d49685..75358d2 100644
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -587,12 +587,19 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2)
        int i;
 
        for (i = 0; i < DLN2_MAX_URBS; i++) {
-               usb_kill_urb(dln2->rx_urb[i]);
                usb_free_urb(dln2->rx_urb[i]);
                kfree(dln2->rx_buf[i]);
        }
 }
 
+static void dln2_stop_rx_urbs(struct dln2_dev *dln2)
+{
+       int i;
+
+       for (i = 0; i < DLN2_MAX_URBS; i++)
+               usb_kill_urb(dln2->rx_urb[i]);
+}
+
 static void dln2_free(struct dln2_dev *dln2)
 {
        dln2_free_rx_urbs(dln2);
@@ -604,9 +611,7 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
                              struct usb_host_interface *hostif)
 {
        int i;
-       int ret;
        const int rx_max_size = DLN2_RX_BUF_SIZE;
-       struct device *dev = &dln2->interface->dev;
 
        for (i = 0; i < DLN2_MAX_URBS; i++) {
                dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
@@ -621,7 +626,19 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
                                  usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
                                  dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
 
-               ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
+       }
+
+       return 0;
+}
+
+static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
+{
+       struct device *dev = &dln2->interface->dev;
+       int ret;
+       int i;
+
+       for (i = 0; i < DLN2_MAX_URBS; i++) {
+               ret = usb_submit_urb(dln2->rx_urb[i], gfp);
                if (ret < 0) {
                        dev_err(dev, "failed to submit RX URB: %d\n", ret);
                        return ret;
@@ -665,9 +682,8 @@ static const struct mfd_cell dln2_devs[] = {
        },
 };
 
-static void dln2_disconnect(struct usb_interface *interface)
+static void dln2_stop(struct dln2_dev *dln2)
 {
-       struct dln2_dev *dln2 = usb_get_intfdata(interface);
        int i, j;
 
        /* don't allow starting new transfers */
@@ -696,6 +712,14 @@ static void dln2_disconnect(struct usb_interface 
*interface)
        /* wait for transfers to end */
        wait_event(dln2->disconnect_wq, !dln2->active_transfers);
 
+       dln2_stop_rx_urbs(dln2);
+}
+static void dln2_disconnect(struct usb_interface *interface)
+{
+       struct dln2_dev *dln2 = usb_get_intfdata(interface);
+
+       dln2_stop(dln2);
+
        mfd_remove_devices(&interface->dev);
 
        dln2_free(dln2);
@@ -738,23 +762,30 @@ static int dln2_probe(struct usb_interface *interface,
 
        ret = dln2_setup_rx_urbs(dln2, hostif);
        if (ret)
-               goto out_cleanup;
+               goto out_free;
+
+       ret = dln2_start_rx_urbs(dln2, GFP_KERNEL);
+       if (ret)
+               goto out_stop_rx;
 
        ret = dln2_hw_init(dln2);
        if (ret < 0) {
                dev_err(dev, "failed to initialize hardware\n");
-               goto out_cleanup;
+               goto out_stop_rx;
        }
 
        ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
        if (ret != 0) {
                dev_err(dev, "failed to add mfd devices to core\n");
-               goto out_cleanup;
+               goto out_stop_rx;
        }
 
        return 0;
 
-out_cleanup:
+out_stop_rx:
+       dln2_stop_rx_urbs(dln2);
+
+out_free:
        dln2_free(dln2);
 
        return ret;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html