From: Gregory Herrero <gregory.herr...@intel.com>
Add an of specific function to parse device node properties.
Enable dma usage only if device tree property 'g-use-dma' is present.
Signed-off-by: Gregory Herrero <gregory.herr...@intel.com>
---
drivers/usb/dwc2/core.h | 2 ++
drivers/usb/dwc2/gadget.c | 18 ++++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index e841a56..69acbce 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -563,6 +563,7 @@ struct dwc2_hw_params {
* @setup: NAK management for EP0 SETUP
* @last_rst: Time of last reset
* @eps: The endpoints being supplied to the gadget framework
+ * @g_using_dma: Indicate if dma usage is enabled
*/
struct dwc2_hsotg {
struct device *dev;
@@ -696,6 +697,7 @@ struct dwc2_hsotg {
unsigned int setup:1;
unsigned long last_rst;
struct s3c_hsotg_ep *eps;
+ u32 g_using_dma;
#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
};
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 58699c3..7b51a1c 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -85,11 +85,11 @@ static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg);
* a core reset. This means we either need to fix the gadgets to take
* account of DMA alignment, or add bounce buffers (yuerk).
*
- * Until this issue is sorted out, we always return 'false'.
+ * g_using_dma is set depending on dts flag.
*/
static inline bool using_dma(struct dwc2_hsotg *hsotg)
{
- return false; /* support is not complete */
+ return hsotg->g_using_dma;
}
/**
@@ -3402,6 +3402,18 @@ static void s3c_hsotg_delete_debug(struct dwc2_hsotg
*hsotg)
debugfs_remove(hsotg->debug_root);
}
+#ifdef CONFIG_OF
+static void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg)
+{
+ struct device_node *np = hsotg->dev->of_node;
+
+ /* Enable dma if requested in device tree */
+ hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
+}
+#else
+static inline void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg) { }
+#endif
+
/**
* dwc2_gadget_init - init function for gadget
* @dwc2: The data structure for the DWC2 driver.
@@ -3421,6 +3433,8 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
/* Set default UTMI width */
hsotg->phyif = GUSBCFG_PHYIF16;
+ s3c_hsotg_of_probe(hsotg);
+
/*
* Attempt to find a generic PHY, then look for an old style
* USB PHY, finally fall back to pdata
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
