On Sun, 18 Jan 2015 15:51:21 +0100
Sylvain Rochet <sylvain.roc...@finsecur.com> wrote:
> Prepare_enable on rising edge, disable_unprepare on falling edge. Reduce
> power consumption if USB PLL is not already necessary for OHCI or EHCI.
> If USB host is not connected we can sleep with USB PLL stopped.
>
> This driver does not support suspend/resume yet, not suspending if we
> are still attached to an USB host is fine for what I need, this patch
> allow suspending with USB PLL stopped when USB device is not currently
> used.
>
> Signed-off-by: Sylvain Rochet <sylvain.roc...@finsecur.com>
> ---
> drivers/usb/gadget/udc/atmel_usba_udc.c | 95
> ++++++++++++++++++++++++---------
> drivers/usb/gadget/udc/atmel_usba_udc.h | 4 ++
> 2 files changed, 73 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c
> b/drivers/usb/gadget/udc/atmel_usba_udc.c
> index e207d75..986677b 100644
> --- a/drivers/usb/gadget/udc/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
> @@ -315,6 +315,38 @@ static inline void usba_cleanup_debugfs(struct usba_udc
> *udc)
> }
> #endif
>
[...]
>
> if (gpio_is_valid(udc->vbus_pin)) {
> if (!devm_gpio_request(&pdev->dev, udc->vbus_pin,
> "atmel_usba_udc")) {
> - ret = devm_request_irq(&pdev->dev,
> - gpio_to_irq(udc->vbus_pin),
> - usba_vbus_irq, 0,
> + ret = devm_request_threaded_irq(&pdev->dev,
> + gpio_to_irq(udc->vbus_pin), NULL,
> + usba_vbus_irq_thread, IRQF_NO_SUSPEND |
> IRQF_ONESHOT,
You should drop the IRQF_NO_SUSPEND flag. If you want to wakeup on VBUS
change you should use enable_irq_wake instead.
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
