This revert a82b76f7fa6154e8ab2d8071842a3e38b9c0d0ff.

The commit causes an extra reset in remote wakeup as described in:
http://www.spinics.net/lists/linux-usb/msg119080.html

Signed-off-by: Zhuang Jin Can <jin.can.zhu...@intel.com>
---
 drivers/usb/core/hub.c |   34 +++++++++-------------------------
 1 file changed, 9 insertions(+), 25 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index aeb50bb..89d009a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4882,7 +4882,7 @@ static void hub_port_connect_change(struct usb_hub *hub, 
int port1,
 static void port_event(struct usb_hub *hub, int port1)
                __must_hold(&port_dev->status_lock)
 {
-       int connect_change, reset_device = 0;
+       int connect_change;
        struct usb_port *port_dev = hub->ports[port1 - 1];
        struct usb_device *udev = port_dev->child;
        struct usb_device *hdev = hub->hdev;
@@ -4970,30 +4970,14 @@ static void port_event(struct usb_hub *hub, int port1)
                        if (hub_port_reset(hub, port1, NULL,
                                        HUB_BH_RESET_TIME, true) < 0)
                                hub_port_disable(hub, port1, 1);
-               } else
-                       reset_device = 1;
-       }
-
-       /*
-        * On disconnect USB3 protocol ports transit from U0 to
-        * SS.Inactive to Rx.Detect. If this happens a warm-
-        * reset is not needed, but a (re)connect may happen
-        * before hub_wq runs and sees the disconnect, and the
-        * device may be an unknown state.
-        *
-        * If the port went through SS.Inactive without hub_wq
-        * seeing it the C_LINK_STATE change flag will be set,
-        * and we reset the dev to put it in a known state.
-        */
-       if (reset_device || (udev && hub_is_superspeed(hub->hdev)
-                               && (portchange & USB_PORT_STAT_C_LINK_STATE)
-                               && (portstatus & USB_PORT_STAT_CONNECTION))) {
-               usb_unlock_port(port_dev);
-               usb_lock_device(udev);
-               usb_reset_device(udev);
-               usb_unlock_device(udev);
-               usb_lock_port(port_dev);
-               connect_change = 0;
+               } else {
+                       usb_unlock_port(port_dev);
+                       usb_lock_device(udev);
+                       usb_reset_device(udev);
+                       usb_unlock_device(udev);
+                       usb_lock_port(port_dev);
+                       connect_change = 0;
+               }
        }
 
        if (connect_change)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to