sometimes we want to just mask/unmask interrupts
without touching devctl register. For those
cases, let's introduce musb_enable_interrupts and
musb_disable_interrupts()
Signed-off-by: Felipe Balbi <ba...@ti.com>
---
drivers/usb/musb/musb_core.c | 37 ++++++++++++++++++++++++++-----------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 70b2612205f8..ff34ef2654ab 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -507,7 +507,9 @@ void musb_hnp_stop(struct musb *musb)
musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
}
+static void musb_disable_interrupts(struct musb *musb);
static void musb_generic_disable(struct musb *musb);
+
/*
* Interrupt Service Routine to record USB "global" interrupts.
* Since these do not happen often and signify things of
@@ -977,7 +979,7 @@ b_host:
/*-------------------------------------------------------------------------*/
-static void musb_generic_disable(struct musb *musb)
+static void musb_disable_interrupts(struct musb *musb)
{
void __iomem *mbase = musb->mregs;
u16 temp;
@@ -989,16 +991,35 @@ static void musb_generic_disable(struct musb *musb)
musb->intrrxe = 0;
musb_writew(mbase, MUSB_INTRRXE, 0);
- /* off */
- musb_writeb(mbase, MUSB_DEVCTL, 0);
-
/* flush pending interrupts */
temp = musb_readb(mbase, MUSB_INTRUSB);
temp = musb_readw(mbase, MUSB_INTRTX);
temp = musb_readw(mbase, MUSB_INTRRX);
+}
+
+static void musb_enable_interrupts(struct musb *musb)
+{
+ void __iomem *regs = musb->mregs;
+
+ /* Set INT enable registers, enable interrupts */
+ musb->intrtxe = musb->epmask;
+ musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+ musb->intrrxe = musb->epmask & 0xfffe;
+ musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+ musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
}
+static void musb_generic_disable(struct musb *musb)
+{
+ void __iomem *mbase = musb->mregs;
+
+ musb_disable_interrupts(musb);
+
+ /* off */
+ musb_writeb(mbase, MUSB_DEVCTL, 0);
+}
+
/*
* Program the HDRC to start (enable interrupts, dma, etc.).
*/
@@ -1009,13 +1030,7 @@ void musb_start(struct musb *musb)
dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
- /* Set INT enable registers, enable interrupts */
- musb->intrtxe = musb->epmask;
- musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
- musb->intrrxe = musb->epmask & 0xfffe;
- musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
- musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
+ musb_enable_interrupts(musb);
musb_writeb(regs, MUSB_TESTMODE, 0);
/* put into basic highspeed mode and start session */
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
