Hi, On Wed, Mar 18, 2015 at 02:40:21PM +0200, Heikki Krogerus wrote: > > Major changes since v1: > - calling dwc3_phy_setup earlier and registering the ULPI interface there. > - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI > as > suggested by Felipe > - dwc3 soft reset before registration of the ULPI interface to sync the clocks > as suggested by David > - Including support for the BYT boards that have the GPIOs controlling the > reset > and cs signals. > > > Heikki Krogerus (12): > usb: add bus type for USB ULPI > usb: dwc3: USB2 PHY register access bits > usb: dwc3: ULPI or UTMI+ select > usb: dwc3: store driver data earlier > usb: dwc3: cache hwparams earlier > usb: dwc3: soft reset to it's own function > usb: dwc3: setup phys earlier > usb: dwc3: add hsphy_interface property > usb: dwc3: pci: add quirk for Baytrails > usb: dwc3: add ULPI interface support > phy: helpers for USB ULPI PHY registering > phy: add driver for TI TUSB1210 ULPI PHY
Except for my comment on patch "9/12", this version looks fine on my side. BR, David -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html