On Wed, Jul 08, 2015 at 01:19:27PM +0300, Roger Quadros wrote:
> struct otg_fsm is the interface to the OTG state machine.
>
> Document the input, output and internal state variables.
> Definations are taken from Table 7-2 and Table 7-4 of
> the USB OTG & EH Specification Rev.2.0
>
> Re-arrange some of the members as per use case for more
> clarity.
>
> Signed-off-by: Roger Quadros <rog...@ti.com>
> ---
> include/linux/usb/otg-fsm.h | 89
> +++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 82 insertions(+), 7 deletions(-)
>
> diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
> index f728f18..ca508c2 100644
> --- a/include/linux/usb/otg-fsm.h
> +++ b/include/linux/usb/otg-fsm.h
> @@ -59,37 +59,112 @@ enum otg_fsm_timer {
> NUM_OTG_FSM_TIMERS,
> };
>
> -/* OTG state machine according to the OTG spec */
> +/**
> + * struct otg_fsm - OTG state machine according to the OTG spec
> + *
> + * OTG hardware Inputs
> + *
> + * Common inputs for A and B device
> + * @id: TRUE for B-device, FALSE for A-device.
> + * @adp_change: TRUE when current ADP measurement (n) value, compared to the
> + * ADP measurement taken at n-2, differs by more than CADP_THR
> + * @power_up: TRUE when the OTG device first powers up its USB system
> and
> + * ADP measurement taken if ADP capable
> + *
> + * A-Device state inputs
> + * @a_srp_det: TRUE if the A-device detects SRP
> + * @a_vbus_vld: TRUE when VBUS voltage is in regulation
> + * @b_conn: TRUE if the A-device detects connection from the B-device
> + * @a_bus_resume: TRUE when the B-device detects that the A-device is
> signaling
> + * a resume (K state)
> + * B-Device state inputs
> + * @a_bus_suspend: TRUE when the B-device detects that the A-device has put
> the
> + * bus into suspend
> + * @a_conn: TRUE if the B-device detects a connection from the A-device
> + * @b_se0_srp: TRUE when the line has been at SE0 for more than the
> minimum
> + * time before generating SRP
> + * @b_ssend_srp: TRUE when the VBUS has been below VOTG_SESS_VLD for more
> than
> + * the minimum time before generating SRP
> + * @b_sess_vld: TRUE when the B-device detects that the voltage on VBUS
> is
> + * above VOTG_SESS_VLD
> + * @test_device: TRUE when the B-device switches to B-Host and detects an OTG
> + * test device. This must be set by host/hub driver
> + *
> + * Application inputs (A-Device)
> + * @a_bus_drop: TRUE when A-device application needs to power down the
> bus
> + * @a_bus_req: TRUE when A-device application wants to use the bus.
> + * FALSE to suspend the bus
> + *
> + * Application inputs (B-Device)
> + * @b_bus_req: TRUE during the time that the Application running on the
> + * B-device wants to use the bus
> + *
> + * Auxilary inputs (OTG v1.3 only. Obsolete now.)
> + * @a_sess_vld: TRUE if the A-device detects that VBUS is above
> VA_SESS_VLD
> + * @b_bus_suspend: TRUE when the A-device detects that the B-device has put
> + * the bus into suspend
> + * @b_bus_resume: TRUE when the A-device detects that the B-device is
> signaling
> + * resume on the bus
> + *
> + * OTG Output status. Read only for users. updated by otg_ops() helpers
updated by OTG FSM helpers defined in this file
Only one tiny comment, others are ok.
Acked-by: Peter Chen <peter.c...@freescale.com>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
