Hi,
On 31-07-15 16:23, Jonathan Liu wrote:
Hi Hans,
On 13/06/2015 10:37 PM, Hans de Goede wrote:
The sunxi musb glue needs to know if a host or normal usb cable is plugged
in, add extcon support so that the musb glue can monitor the host status.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
Changes in v5:
-Split out of the "Add id and vbus detection support" commit
-Ported to the new extcon API queued for 4.2
---
drivers/phy/Kconfig | 1 +
drivers/phy/phy-sun4i-usb.c | 32 +++++++++++++++++++++++++++++++-
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a53bd5b..9841780 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -173,6 +173,7 @@ config PHY_SUN4I_USB
tristate "Allwinner sunxi SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
depends on RESET_CONTROLLER
+ depends on EXTCON
select GENERIC_PHY
help
Enable this to support the transceiver that is part of Allwinner
Should probably add CONFIG_EXTCON=y to arch/arm/configs/sunxi_defconfig so that
CONFIG_PHY_SUN4I_USB=y works out of the box.
Right, ChenYu just send out 2 defconfig patches fixing this.
Thanks for the heads up.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
