Hey Hans,
On 06-08-15 16:35, Hans de Goede wrote:
Hi,
On 06-08-15 10:22, Olliver Schinagl wrote:
Hey Hans,
I've tried getting your musb stuff working on a cubietruck, but i
don't seem to see this patch on your linux-sunxi/sunxi-wip branch on
github? Is your github branch fully functional at the moment?
What I have done so far, is build the kernel using sunxi_defconfig
and enabled USB_MUSB_SUNXI with its dependancies (musb isn't enabled
there by default): USB_SUPPORT [=y] && USB_MUSB_HDRC [=y] &&
ARCH_SUNXI [=y] && NOP_USB_XCEIV [=y] && PHY_SUN4I_USB [=y] && EXTCON
[=y] && GENERIC_PHY [=y] Selects: SUNXI_SRAM [=y]
I changed the dts from dr_mode='otg' to dr_mode='host', a) we only
need host mode anyway (the id pin isn't properly connected)
If you change the dr_mode to host then you _must_ also remove any
id_det and vbus_det
gpio settings from the usb_phy node in the dts, as the sun4i phy code
detects
host vs otg mode by checking for the presence of these.
Yes, this fixes it and makes it work. Thanks.
Also I apologize for not noticing this patch in your queue before :)
Looks like everything is all ready in your WIP branch.
Now, I see that Chen-Yu found the same problems here:
http://permalink.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/17843
So far, with your mentioned changes to remove the id and vbus gpio's you
can have my
Tested-by: Olliver Schinagl <o.schin...@ultimaker.com>
> and b) I got an error about an known dr_mode before and this was the
quick and easy way.
Dmesg produces the following related to musb.
[ 1.691062] usb_phy_generic.0.auto supply vcc not found, using
dummy regulator
[ 1.691445] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk
combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 1.691453] musb-hdrc: MHDRC RTL version 0.0
[ 1.691467] musb-hdrc: 11/11 max ep, 5184/8192 memory
[ 1.691543] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 1.691553] musb-hdrc musb-hdrc.1.auto: new USB bus registered,
assigned bus number 5
[ 1.692470] hub 5-0:1.0: USB hub found
[ 1.692529] hub 5-0:1.0: 1 port detected
[ 1.699956] sunxi-rtc 1c20d00.rtc: setting system clock to
2015-08-06 07:59:08 UTC (1438847948)
[ 1.704733] usb0-vbus: disabling
[ 1.765695] ldo4: disabling
[ 1.808351] ldo3: disabling
[ 1.848769] vcc5v0: disabling
[ 1.848774] vcc3v0: disabling
The usb_phy_generic missing shouldn't be too bad? But the usb0-vbus
being disabled obviously might be related to the musb port not working?
Correct.
For starters I would try the dts changes I suggested above.
Yep that fixed it.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html