Hi, On Friday 07 August 2015 06:00 PM, Chunfeng Yun wrote: > support usb3.0 phy of mt65xx SoCs > > Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
change $subject to phy: > --- > drivers/phy/Kconfig | 9 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-mt65xx-usb3.c | 467 > ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 477 insertions(+) > create mode 100644 drivers/phy/phy-mt65xx-usb3.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index c0e6ede..019cf8b 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA > help > Support for SATA PHY on Hisilicon hix5hd2 Soc. > > +config PHY_MT65XX_USB3 > + tristate "Mediatek USB3.0 PHY Driver" > + depends on ARCH_MEDIATEK && OF > + select GENERIC_PHY > + help > + Say 'Y' here to add support for Mediatek USB3.0 PHY driver > + for mt65xx SoCs. it supports two usb2.0 ports and > + one usb3.0 port. > + > config PHY_SUN4I_USB > tristate "Allwinner sunxi SoC USB PHY driver" > depends on ARCH_SUNXI && HAS_IOMEM && OF > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index f344e1b..3ceff2a 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3) += > phy-ti-pipe3.o > obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > +obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o > obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c > new file mode 100644 > index 0000000..6835bff > --- /dev/null > +++ b/drivers/phy/phy-mt65xx-usb3.c . . <snip> . . > +static struct phy *mt65xx_phy_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev); > + struct mt65xx_phy_instance *instance = NULL; > + struct device_node *phy_np = args->np; > + struct resource res; > + int index; > + int ret; > + > + if (args->args_count != 1) { > + dev_err(dev, "invalid number of cells in 'phy' property\n"); > + return ERR_PTR(-EINVAL); > + } > + > + for (index = 0; index < u3phy->nphys; index++) > + if (phy_np == u3phy->phys[index]->phy->dev.of_node) { > + instance = u3phy->phys[index]; > + break; > + } > + > + if (!instance) { > + dev_err(dev, "failed to find appropriate phy\n"); > + return ERR_PTR(-EINVAL); > + } > + > + instance->type = args->args[0]; > + > + if (!(instance->type == PHY_TYPE_USB2 || > + instance->type == PHY_TYPE_USB3)) { > + dev_err(dev, "unsupported device type: %d\n", instance->type); > + return ERR_PTR(-EINVAL); > + } > + > + ret = of_address_to_resource(phy_np, 0, &res); > + if (ret) { > + dev_err(dev, "failed to get address resource, err-%d > (index-%d)\n", > + ret, instance->index); > + return ERR_PTR(-EINVAL); > + } This should be done in probe itself. > + > + instance->port_base = devm_ioremap_resource(&instance->phy->dev, &res); > + if (IS_ERR(instance->port_base)) { > + dev_err(dev, "failed to remap sif regs\n"); > + return instance->port_base; > + } This too should be done in probe. > + > + return instance->phy; > +} > + > +static struct phy_ops mt65xx_u3phy_ops = { > + .init = mt65xx_phy_init, > + .power_on = mt65xx_phy_power_on, > + .power_off = mt65xx_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static int mt65xx_u3phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + struct device_node *child_np; > + struct phy_provider *phy_provider; > + struct resource *sif_res; > + struct mt65xx_u3phy *u3phy; > + int port; > + > + u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL); > + if (!u3phy) > + return -ENOMEM; > + > + u3phy->nphys = of_get_child_count(np); > + u3phy->phys = devm_kcalloc(dev, u3phy->nphys, > + sizeof(*u3phy->phys), GFP_KERNEL); > + if (!u3phy->phys) > + return -ENOMEM; > + > + u3phy->dev = dev; > + platform_set_drvdata(pdev, u3phy); > + > + sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + u3phy->sif_base = devm_ioremap_resource(dev, sif_res); > + if (IS_ERR(u3phy->sif_base)) { > + dev_err(dev, "failed to remap sif regs\n"); > + return PTR_ERR(u3phy->sif_base); > + } > + > + u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref"); > + if (IS_ERR(u3phy->u3phya_ref)) { > + dev_err(dev, "error to get u3phya_ref\n"); > + return PTR_ERR(u3phy->u3phya_ref); > + } > + > + port = 0; > + for_each_child_of_node(np, child_np) { > + struct mt65xx_phy_instance *instance; > + struct phy *phy; > + > + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); > + if (!instance) > + return -ENOMEM; > + > + u3phy->phys[port] = instance; > + > + phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops); > + if (IS_ERR(phy)) { > + dev_err(dev, "failed to create phy\n"); > + return PTR_ERR(phy); > + } > + instance->phy = phy; > + instance->index = port; 'index' here is not used anywhere. > + phy_set_drvdata(phy, instance); > + port++; > + } > + > + phy_provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate); > + if (IS_ERR(phy_provider)) { > + dev_err(dev, "Failed to register phy provider\n"); > + return PTR_ERR(phy_provider); > + } > + > + return u3phy_clk_enable(u3phy); Can't we clk enable in phy_init or phy-power_on where it is actually needed. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html