On Tue, 18 Aug 2015, Igor Kotrasinski wrote:
> When handling device GET_DESCRIPTOR, composite gadget driver fills
> the bcdUSB field only if the gadget supports USB 3.0. Otherwise
> the field is left unfilled.
>
> Make behaviour consistent by filling bcdUSB for the other two cases of
> USB 2.0 and USB 1.1 capable gadgets.
>
> Given that legacy gadget drivers set bcdUSB manually, it makes sense to
> place the entire logic in the composite gadget driver.
>
> Signed-off-by: Igor Kotrasinski <i.kotrasi...@samsung.com>
> ---
> drivers/usb/gadget/composite.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
> index 58b4657..6eac055 100644
> --- a/drivers/usb/gadget/composite.c
> +++ b/drivers/usb/gadget/composite.c
> @@ -1499,6 +1499,10 @@ composite_setup(struct usb_gadget *gadget, const
> struct usb_ctrlrequest *ctrl)
> } else {
> cdev->desc.bcdUSB = cpu_to_le16(0x0210);
> }
> + } else if (gadget_is_dualspeed(gadget)) {
> + cdev->desc.bcdUSB = cpu_to_le16(0x0200);
> + } else {
> + cdev->desc.bcdUSB = cpu_to_le16(0x0110);
> }
I would argue that there's no need to check gadget_is_dualspeed();
bcdUSB should always be set to 0x0200. After all, the spec explicitly
permits USB-2.0 devices to run only at full speed.
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
