-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Hi,
On 03/09/15 18:48, Felipe Balbi wrote:
> Hi,
>
> On Thu, Sep 03, 2015 at 03:46:43PM +0300, Roger Quadros wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA256
>>
>> On 02/09/15 17:34, Felipe Balbi wrote:
>>> On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
>>>> From: Felipe Balbi <ba...@ti.com>
>>>>
>>>> Add support to use interrupt names,
>>>>
>>>> Following are the interrupt names
>>>>
>>>> Peripheral Interrupt - peripheral
>>>> HOST Interrupt - host
>>>> OTG Interrupt - otg
>>>>
>>>> [Roger Q]
>>>> - If any of these are missing we use the
>>>> first available IRQ resource so that we don't
>>>> break with older DTBs.
>>>
>>> this is what original commit did:
>>>
>>> commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
>>> Author: Felipe Balbi <ba...@ti.com>
>>> Date: Fri Jan 3 13:49:38 2014 -0600
>>>
>>> usb: dwc3: cleanup IRQ resources
>>>
>>> In order to make it easier for the driver to
>>> figure out which modes of operation it has,
>>> and because some dwc3 integrations have rather
>>> fuzzy IRQ routing, we now require three different
>>> IRQ numbers (peripheral, host, otg).
>>>
>>> In order to do that and maintain backwards compatibility,
>>> we still maintain support for the old IRQ resource name,
>>> but if you *really* want to have proper peripheral/host/otg
>>> support, you should make sure your resources are correct.
>>>
>>> Signed-off-by: Felipe Balbi <ba...@ti.com>
>>
>> This is better since we request the resource only if needed and bail out
>> if it is not present.
>>
>>>
>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>> index 60580a01cdd2..1f01031873b7 100644
>>> --- a/drivers/usb/dwc3/core.c
>>> +++ b/drivers/usb/dwc3/core.c
>>> @@ -556,10 +556,22 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
>>> static int dwc3_core_init_mode(struct dwc3 *dwc)
>>> {
>>> struct device *dev = dwc->dev;
>>> + struct platform_device *pdev = to_platform_device(dev);
>>> int ret;
>>>
>>> switch (dwc->dr_mode) {
>>> case USB_DR_MODE_PERIPHERAL:
>>> + dwc->gadget_irq = platform_get_irq_byname(pdev,
>>> "dwc3_peripheral");
>>
>> Shall we just name it just "peripheral"?
>
> sure, why not :-)
>
>>> + if (dwc->gadget_irq < 0) {
>>> + dwc->gadget_irq = platform_get_irq_byname(pdev,
>>> "dwc_usb3");
>>
>> How will this work? Currently we don't have a name for the IRQ in the DT.
>
> we can just add interrupt-names, right ? Or, the fallback could be what
> is already done today: just fetch it by index.
>
>>
>>> + if (dwc->gadget_irq < 0) {
>>> + dev_err(dev, "missing IRQ\n");
>>> + return dwc->gadget_irq;
>>> + } else {
>>> + dev_warn(dev, "dwc_usb3 resource is
>>> deprecated\n");
>>
>> Do we want to warn about legacy nodes?
>
> Sure :-)
>
> Now, do you want me to update it, or will you do it ? BTW, if you decide
> to do it, we need to patch all users :-)
Would appreciate if you can do it. It is independent of dual-role support and
can go in early.
BTW omap users are already using the named interrupt property.
>
>>> @@ -576,6 +604,28 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>>> }
>>> break;
>>> case USB_DR_MODE_OTG:
>>> + dwc->gadget_irq = platform_get_irq_byname(pdev,
>>> "dwc3_peripheral");
>>> + if (dwc->gadget_irq < 0) {
>>> + dwc->gadget_irq = platform_get_irq_byname(pdev,
>>> "dwc_usb3");
>>> + if (dwc->gadget_irq < 0) {
>>> + dev_err(dev, "missing IRQ\n");
>>> + return dwc->gadget_irq;
>>> + } else {
>>> + dev_warn(dev, "dwc_usb3 resource is
>>> deprecated\n");
>>> + }
>>> +
>>> + dwc->xhci_irq = dwc->gadget_irq;
>>> + dwc->otg_irq = dwc->gadget_irq;
>>> + } else {
>>> + dwc->xhci_irq = platform_get_irq_byname(pdev,
>>> "dwc3_host");
>>> + if (dwc->xhci_irq < 0) {
>>> + dev_err(dev, "missing Host IRQ\n");
>>> + return dwc->xhci_irq;
>>> + }
>>> +
>>> + dwc->otg_irq = platform_get_irq_byname(pdev,
>>> "dwc3_otg");
>>
>> need to check if error?
>
> right
>
>>> + }
>>
>> Need to setup xhci_resource[1]?
>
> isn't it done above ?
>
It is done in the USB_DR_MODE_HOST case, but that won't be executed for
USB_DR_MODE_OTG case, no?
I'm talking about this part
+ dwc->xhci_resources[1].start = dwc->xhci_irq;
+ dwc->xhci_resources[1].end = dwc->xhci_irq;
+ dwc->xhci_resources[1].flags = IORESOURCE_IRQ;
+ dwc->xhci_resources[1].name = "xhci";
cheers,
- -roger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAEBCAAGBQJV6WBDAAoJENJaa9O+djCTXW4QAIx6ok9D/bGqz8F++KKdIJmQ
Kj7cedP1B4el/+OQ20n38g9U8HosrY5wtB9n0VdBc99bLGbBFMOheeamLQw8u6rU
WKT4zcXjbasDURE25eqmAu3Nc7EiXVebiu07GEVR82/zl2H6edSddaf9Bx/3+yzm
VV6gwIXBISbkTuTfw5Nsh9GR4+X3KTOE78Nygtv7MfbLpMrfbABGHhWnGpCRn5oO
SHMvZd1HUHFKb0Z2nKrBXV9yzayQtfjAjNjKn2rIxwirKdMAk96z+32Ql3lh06Aq
jxe+UK/KXH9+Cd25FFEQlazBxcd7gnbugS+MYroUW8dPSWsX0LjfIkzjDbwwfh12
DqLMhwa+ouCvJMjrU5ifRvtmVvNS5LUY3Em6ZQW+3nzXrFdiaAuzOTc8WeMGKL9T
Hl63yKsc1kGgtkpoxvMlNdkQABIN7B7mMlJTZ3GKLBcneRcWjc/nPmsCV+ASuukg
K5Cck/RVtB2KBhh8e1vrZIFJOVrtoB6T22MwJf3Lrw+uVxxprM9w9SbE1nibWU/G
7AebuHXtM08Hon999j4odQaAmKU1zS0EfSm6bdy6/7cTDfhicidkK4w3d9MxR9oo
kOTIE/ti3tppH94CiTN6fjT6I0Z9en6lEPnUv1X1pypbRKWCQw0o7/GxCrhkkbE/
eHH1noaEXEGyoTzmrlrW
=fDSz
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
