The phy's init routine must be called before it can be used. Do so in
musb_init_controller and the matching shutdown in musb_remove.
Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
---
Note I'm not entirely sure this is the right place, but this made usb
working on my omap3 machine here (at least somewhat, still fighting with
the last details).
---
drivers/usb/musb/musb_core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2c624a10748d..ebb8a5455d2f 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2108,6 +2108,10 @@ musb_init_controller(struct device *dev, int nIrq, void
__iomem *ctrl)
pm_runtime_get_sync(musb->controller);
+ status = usb_phy_init(musb->xceiv);
+ if (status < 0)
+ goto err_usb_phy_init;
+
if (use_dma && dev->dma_mask) {
musb->dma_controller =
musb_dma_controller_create(musb, musb->mregs);
@@ -2222,7 +2226,11 @@ fail3:
cancel_delayed_work_sync(&musb->deassert_reset_work);
if (musb->dma_controller)
musb_dma_controller_destroy(musb->dma_controller);
+
fail2_5:
+ usb_phy_shutdown(musb->xceiv);
+
+err_usb_phy_init:
pm_runtime_put_sync(musb->controller);
fail2:
@@ -2282,6 +2290,8 @@ static int musb_remove(struct platform_device *pdev)
if (musb->dma_controller)
musb_dma_controller_destroy(musb->dma_controller);
+ usb_phy_shutdown(musb->xceiv);
+
cancel_work_sync(&musb->irq_work);
cancel_delayed_work_sync(&musb->finish_resume_work);
cancel_delayed_work_sync(&musb->deassert_reset_work);
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
