DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver.

Signed-off-by: Petr Kulhavy <p...@barix.com>
---
 .../devicetree/bindings/usb/da8xx-usb.txt          | 47 ++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt 
b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
new file mode 100644
index 0000000..89198ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -0,0 +1,47 @@
+TI DA8xx MUSB
+~~~~~~~~~~~~~
+For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+ - compatible : Should be set to "ti,da830-musb".
+
+ - reg: Offset and length of the USB controller register set.
+
+ - interrupts: The USB interrupt number.
+
+ - interrupt-names: Should be set to "mc".
+
+ - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or 
"otg".
+
+ - mentor,power : Specifies the maximum current in milliamperes the controller 
can
+     supply in host mode.
+
+ - ti,usb2-phy-refclock-frequency : Integer. Defines the USB 2.0 PHY reference 
clock input
+     frequency in Hz in case the clock is generated by the internal PLL.
+     Supported values are 12MHz, 13MHz, 19.2MHz, 20MHz, 24MHz, 26MHz, 38.4MHz, 
40MHz, 48MHz
+
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+ - ti,usb2-phy-clkmux-pll: Boolean. Defines the USB 2.0 PHY reference clock 
source.
+     If present the internal PLL is used as a clock source, otherwise the 
external
+     USB_REFCLKIN pin is used.
+
+Example:
+
+       usb20: usb@1e00000 {
+               compatible = "ti,da830-musb";
+               reg =   <0x00200000 0x10000>;
+               interrupt-parent = <&intc>;
+               interrupts = <58>;
+               interrupt-names = "mc";
+
+               dr_mode = "host";
+               mentor,power = <500>;
+
+               ti,usb2-phy-clkmux-pll;
+               ti,usb2-phy-refclock-frequency = <24000000>;
+
+               status = "okay";
+       };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to