On 1/25/2016 10:20 PM, Jianqiang Tang wrote:
> From: "Tang, Jianqiang" <jianqiang.t...@intel.com>
>
> There will be data toggle error happen for full speed buld-out transfer.
> The data toggle bit is saved in qh for non-control transfers, it is wrong
> to check the qtd for that case.
>
> Also fix one static analysis tool issue after fix the data toggle error.
>
> Signed-off-by: Dyson Lee <dyson....@intel.com>
> Signed-off-by: Tang, Jianqiang <jianqiang.t...@intel.com>
> ---
> drivers/usb/dwc2/hcd_ddma.c | 2 +-
> drivers/usb/dwc2/hcd_intr.c | 4 ++++
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
> index 36606fc..6b18956 100644
> --- a/drivers/usb/dwc2/hcd_ddma.c
> +++ b/drivers/usb/dwc2/hcd_ddma.c
> @@ -1258,7 +1258,7 @@ static void dwc2_complete_non_isoc_xfer_ddma(struct
> dwc2_hsotg *hsotg,
> */
> if (halt_status == DWC2_HC_XFER_STALL)
> qh->data_toggle = DWC2_HC_PID_DATA0;
> - else if (qtd)
> + else
> dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
> }
>
> diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
> index f825380..918773f 100644
> --- a/drivers/usb/dwc2/hcd_intr.c
> +++ b/drivers/usb/dwc2/hcd_intr.c
> @@ -530,6 +530,10 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
> else
> chan->qh->data_toggle = DWC2_HC_PID_DATA1;
> } else {
> + if (!qtd) {
> + dev_err(hsotg->dev, "qtd is null, return\n");
> + return;
> + }
> if (pid == TSIZ_SC_MC_PID_DATA0)
> qtd->data_toggle = DWC2_HC_PID_DATA0;
> else
>
Thanks for this. I've applied this internally for testing and added
WARNs in the dwc2_hcd_save_data_toggle function(). I will resend for
review along with another fix that we have for DDMA in that same area.
Regards,
John
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
