From: Tang, Jianqiang <jianqiang.t...@intel.com>
There will be data toggle error happen for full speed buld-out transfer.
The data toggle bit is saved in qh for non-control transfers, it is wrong
to check the qtd for that case.
Also fix one static analysis tool issue after fix the data toggle error.
John Youn:
* Added WARN() to warn on improper usage of the
dwc2_hcd_save_data_toggle() function.
Signed-off-by: Dyson Lee <dyson....@intel.com>
Signed-off-by: Tang, Jianqiang <jianqiang.t...@intel.com>
Signed-off-by: John Youn <johny...@synopsys.com>
---
drivers/usb/dwc2/hcd_ddma.c | 2 +-
drivers/usb/dwc2/hcd_intr.c | 8 ++++++++
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index 89db47a..a41274a 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -1257,7 +1257,7 @@ stop_scan:
*/
if (halt_status == DWC2_HC_XFER_STALL)
qh->data_toggle = DWC2_HC_PID_DATA0;
- else if (qtd)
+ else
dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
}
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index f825380..cadba8b 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -525,11 +525,19 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
+ if (WARN(!chan || !chan->qh,
+ "chan->qh must be specified for non-control eps\n"))
+ return;
+
if (pid == TSIZ_SC_MC_PID_DATA0)
chan->qh->data_toggle = DWC2_HC_PID_DATA0;
else
chan->qh->data_toggle = DWC2_HC_PID_DATA1;
} else {
+ if (WARN(!qtd,
+ "qtd must be specified for control eps\n"))
+ return;
+
if (pid == TSIZ_SC_MC_PID_DATA0)
qtd->data_toggle = DWC2_HC_PID_DATA0;
else
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
