[ +CC: Oliver ] On Tue, Feb 09, 2016 at 09:27:39PM +0530, Thorsten Wilmer wrote: > Hi, > > I have a Starter Kit SK-FM4-176L-S6SE2CC > modprobe usbserial vendor=0x1a6a product=0x2000 > > makes the USB Port appear nicely (works with gtkterm) and at the same > time one can use the CMIS-DAP adapter with openocd. > > As suggested by the driver I would like to recommend the > vendor/product IDs to be added.
This looks like a cdc-acm device to me. Any reason why you can't use that driver? If the driver is available, you should get a /dev/ttyACMn device node. If not, could you post the logs from when plugging the device in? > Bus 001 Device 002: ID 1a6a:2000 Spansion Inc. > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.01 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x1a6a Spansion Inc. > idProduct 0x2000 > bcdDevice 1.60 > iManufacturer 1 Spansion > iProduct 2 Spansion CMSIS-DAP + COM Port > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 93 > bNumInterfaces 3 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x00 > (Missing must-be-set bit!) > (Bus Powered) > MaxPower 62mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 0 No Subclass > bInterfaceProtocol 0 None > iInterface 4 Spansion CMSIS-DAP > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.11 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 29 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 1 > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 1 > bInterfaceCount 2 > bFunctionClass 2 Communications > bFunctionSubClass 2 Abstract (modem) > bFunctionProtocol 1 AT-commands (v.25ter) > iFunction 5 Spansion USB Serial Port > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 2 Communications > bInterfaceSubClass 2 Abstract (modem) > bInterfaceProtocol 1 AT-commands (v.25ter) > iInterface 0 > CDC Union: > bMasterInterface 0 > bSlaveInterface 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 255 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x04 EP 4 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 0 > Device Status: 0x0000 > (Bus Powered) Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
