In multi-core SoC, if enable USB endpoint/transmit urb/disable
USB endpoint repeatedly,it can cause a NULL pointer dereference bug:
Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = d3eb4000
[00000010] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP
Pid: 1017, comm: mediaserver
CPU: 0 Not tainted (3.0.101-ZXICTOS_V2.00.20_P2B4_ZTE_ZX296700_ASIC+ #2)
PC is at musb_h_disable+0xfc/0x15c
LR is at musb_h_disable+0xfc/0x15c
pc : [<c0353de8>] lr : [<c0353de8>] psr: 60070093
sp : d3e5bc80 ip : 00000027 fp : d3e5bca4
r10: 00000000 r9 : ffffff94 r8 : 00000080
r7 : 60070013 r6 : d45900f0 r5 : d4717720 r4 : cee2d860
r3 : 00000000 r2 : c0875628 r1 : d3e5bbc0 r0 : 0000002a
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 18c53c7d Table: b3eb404a DAC: 00000015
[<c00519d0>] (__dabt_svc+0x70/0xa0) from [<c0353de8>]
(musb_h_disable+0xfc/0x15c)
[<c0353de8>] (musb_h_disable+0xfc/0x15c) from [<c032f160>]
(usb_hcd_disable_endpoint+0x3c/0x44)
[<c032f160>] (usb_hcd_disable_endpoint+0x3c/0x44) from [<c0331504>]
(usb_disable_endpoint+0x64/0x7c)
[<c0331504>] (usb_disable_endpoint+0x64/0x7c) from [<c0331564>]
(usb_disable_interface+0x48/0x58)
[<c0331564>] (usb_disable_interface+0x48/0x58) from [<c0331bcc>]
(usb_set_interface+0x158/0x274)
[<c0331bcc>] (usb_set_interface+0x158/0x274) from [<c03a8a30>]
(uvc_video_enable+0x78/0x9c)
[<c03a8a30>] (uvc_video_enable+0x78/0x9c) from [<c03a66c4>]
(uvc_v4l2_do_ioctl+0xd08/0x12ec)
[<c03a66c4>] (uvc_v4l2_do_ioctl+0xd08/0x12ec) from [<c036c044>]
(video_usercopy+0x144/0x500)
[<c036c044>] (video_usercopy+0x144/0x500) from [<c03a5444>]
(uvc_v4l2_ioctl+0x2c/0x74)
[<c03a5444>] (uvc_v4l2_ioctl+0x2c/0x74) from [<c036b208>]
(v4l2_ioctl+0x94/0x154)
[<c036b208>] (v4l2_ioctl+0x94/0x154) from [<c0128628>] (do_vfs_ioctl+0x84/0x5ac)
[<c0128628>] (do_vfs_ioctl+0x84/0x5ac) from [<c0128bc8>] (sys_ioctl+0x78/0x80)
[<c0128bc8>] (sys_ioctl+0x78/0x80) from [<c0052000>] (ret_fast_syscall+0x0/0x30)
Considering the following execution sequence:
CPU0 CPU1
musb_urb_dequeue
spin_lock_irqsave(&musb->lock, flags);
ready = qh->is_ready;
qh->is_ready = 0;
musb_giveback(musb, urb, 0);
spin_unlock(&musb->lock);
zx296702_musb_interrupt
musb_interrupt
spin_lock_irqsave(&musb->lock, flags);
musb_advance_schedule
ready = qh->is_ready;
qh->is_ready = 0;
musb_giveback(musb, urb, status);
spin_unlock(&musb->lock);
spin_lock(&musb->lock);
qh->is_ready = ready;
spin_unlock_irqrestore(&musb->lock, flags);
spin_lock(&musb->lock);
qh->is_ready = ready;
When musb_urb_dequeue is called finally, the qh->is_ready has already
been set to 0 in error.Thus the recycling qh job in musb_urb_dequeue
can not be done. That results in accessing empty qh in musb_h_disable.
So the qh in musb_h_disable should be checked.If the qh is emtpy,
then recycle it and go to exit directly.
Signed-off-by: Liu Xiang <liu.xia...@zte.com.cn>
---
drivers/usb/musb/musb_host.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 795a45b..438f5b4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2515,7 +2515,12 @@ musb_h_disable(struct usb_hcd *hcd, struct
usb_host_endpoint *hep)
qh->is_ready = 0;
if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
urb = next_urb(qh);
-
+ if (urb == NULL) {
+ qh->hep->hcpriv = NULL;
+ list_del(&qh->ring);
+ kfree(qh);
+ goto exit;
+ }
/* make software (then hardware) stop ASAP */
if (!urb->unlinked)
urb->status = -ESHUTDOWN;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
