On Thu, Mar 03, 2016 at 11:30:53PM +0100, Maciej S. Szmigiero wrote:
> Hi Peter,
>
> On 03.03.2016 11:01, Peter Chen wrote:
> > From: Peter Chen <peter.c...@freescale.com>
> >
> > The current dts describes USB HUB's property at USB controller's
> > entry, it is improper. The USB HUB should be the child node
> > under USB controller.
> >
> > Signed-off-by: Peter Chen <peter.c...@freescale.com>
>
> Thanks for patches!
>
> VID:PID for hub on UDOO board is 0424:2514.
>
> I've tested these patches on this board and was able to make USB work
> again with following DT changes:
> diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> index d3e54e4..4956de7 100644
> --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> @@ -9,6 +9,8 @@
> *
> */
>
> +#include <dt-bindings/gpio/gpio.h>
> +
> / {
> chosen {
> stdout-path = &uart2;
> @@ -18,21 +27,11 @@
> reg = <0x10000000 0x40000000>;
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - reg_usb_h1_vbus: regulator@0 {
> - compatible = "regulator-fixed";
> - reg = <0>;
> - regulator-name = "usb_h1_vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - startup-delay-us = <2>; /* USB2415 requires a POR of 1
> us minimum */
> - gpio = <&gpio7 12 0>;
> - };
> + usb2415_pwrseq: usb2415_pwrseq {
> + compatible = "usb-pwrseq";
> + clocks = <&clks IMX6QDL_CLK_CKO>;
> + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
> + reset-duration-us = <3000>;
> };
>
> sound {
> @@ -163,9 +218,16 @@
> &usbh1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usbh>;
> - vbus-supply = <®_usb_h1_vbus>;
> - clocks = <&clks 201>;
> status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hub: usb2415@01 {
> + compatible = "usb424,2514";
> + reg = <1>;
> + usb-pwrseq = <&usb2415_pwrseq>;
> + };
> };
>
> &usdhc3 {
>
>
Thank you very much.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
