Jaret Cantu <jaret.ca...@timesys.com> writes: > [ text/plain ] > The TX settings can be calibrated for particular hardware. The > phy is reset by Linux, so this cannot be handled by the bootloader. > > The TRM mentions that the maximum resistance should be used for the > DN/DP calibration in order to pass USB certification. > > The values for the TX registers are poorly described in the TRM. > The meanings of the register values were taken from another > Freescale-provided document: > https://community.freescale.com/message/566147#comment-566912 > > Signed-off-by: Jaret Cantu <jaret.ca...@timesys.com>
unfortunately it's too late for v4.6 as we won't get anybody from DT to agree with this in time. Once v4.5 final is tagged, please resend and Cc devicetree mailinglist too. thanks -- balbi
signature.asc
Description: PGP signature
