On 03/23/2016 10:56 AM, Sekhar Nori wrote:
On Thursday 17 March 2016 07:56 AM, David Lechner wrote:
The da850 family of processors has an async3 clock domain that can be
muxed to either pll0_sysclk2 or pll1_sysclk2. Now that the davinci clocks
have a set_parent callback, we can use this to control the async3 mux
instead of a stand-alone function.
This adds a new async3_clk and sets the appropriate child clocks. The
default is use to pll1_sysclk2 since it is not affected by processor
frequency scaling.
Signed-off-by: David Lechner <da...@lechnology.com>
---
+static int da850_async3_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 __iomem *cfgchip3;
+ u32 val;
+
+ /*
+ * Can't use DA8XX_SYSCFG0_VIRT() here since this can be called before
+ * da8xx_syscfg0_base is initialized.
+ */
+ cfgchip3 = ioremap(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP3_REG, 4);
Is this just a theoretical possibility or have you seen this happen? I
would like to see if there are ways of avoiding this rather than throw
away usage of DA8XX_SYSCFG0_VIRT()
Yes, it will not boot without this. The problem comes from the fact that
clocks are setup in davinci_common_init() which is called before
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K) in da850_init()
(and da830_init()). I also tried moving the ioremap() before
davinci_common_init(), but davinci_common_init() sets up the iomem, so
that doesn't work either.
So, if you want to use DA8XX_SYSCFG0_VIRT() here, the clock init would
have to be split out from davinci_common_init() which would affect all
davinci devices.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
