Hello.
On 03/25/2016 06:13 PM, Rob Herring wrote:
TI has been using the physical address in DT after the @ in device nodes.
The device tree convention is to use the same address that is used for
the reg property. This updates all davinci DT files to use the proper
convention.
Signed-off-by: David Lechner <da...@lechnology.com>
[...]
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 226cda7..4294849 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -15,7 +15,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- intc: interrupt-controller {
+ intc: interrupt-controller@fffee000 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
@@ -23,7 +23,7 @@
reg = <0xfffee000 0x2000>;
};
};
- soc {
+ soc@1c00000 {
This node doesn't have the "reg" prop.
But probably has a ranges property which is correct.
Yes, it does. Didn't know that "ranges" can be used that way, thanks...
Rob
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
