Hi,
  I am not certain to to forward this to, so I am trying linux-usb and ext4. 
Please add relevant people/lists, thank you.

# dmesg | grep "UBSAN: Undefined behaviour"
[    2.638843] UBSAN: Undefined behaviour in drivers/usb/host/ehci-hub.c:873:47
[    8.553620] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2612:15
[   25.341048] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1274:11
[   41.460542] UBSAN: Undefined behaviour in 
./arch/x86/include/asm/atomic.h:156:9
#

Full dmesg is attached.

Hope this helps,
Martin
[    0.000000] Linux version 4.5.1-default-pciehp (root@vostro) (gcc version 
5.3.0 (Gentoo 5.3.0 p1.0, pie-0.6.5) ) #1 SMP Thu Apr 14 14:17:48 CEST 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.1 root=/dev/sda5 ro 
slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 intel_idle.max_cstate=c3 
i915.i915_enable_rc6=1 usbcore.autosuspend=-1
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point 
registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, 
using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da4e5000-0x00000000da527fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da528000-0x00000000da792fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da793000-0x00000000da966fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000daa88fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000daa89000-0x00000000dad67fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FE0000000 write-back
[    0.000000]   2 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 41FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x046ab000, 0x046abfff] PGTABLE
[    0.000000] BRK [0x046ac000, 0x046acfff] PGTABLE
[    0.000000] BRK [0x046ad000, 0x046adfff] PGTABLE
[    0.000000] BRK [0x046ae000, 0x046aefff] PGTABLE
[    0.000000] BRK [0x046af000, 0x046affff] PGTABLE
[    0.000000] BRK [0x046b0000, 0x046b0fff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000DAFE8078 000074 (v01 DELL   WN09     
01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DAFF1D38 0000F4 (v04 DELL   WN09     
01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DAFE8180 009BB6 (v02 DELL   WN09     
00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DAFE3F80 000040
[    0.000000] ACPI: APIC 0x00000000DAFF1E30 000072 (v03 DELL   WN09     
01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DAFF1EA8 00003C (v01 DELL   WN09     
01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DAFF1EE8 0004B0 (v01 TrmRef PtidDevc 
00001000 INTL 20091112)
[    0.000000] ACPI: SLIC 0x00000000DAFF2398 000176 (v01 DELL   WN09     
01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000DAFF2510 000038 (v01 DELL   WN09     
01072009 AMI. 00000004)
[    0.000000] ACPI: SSDT 0x00000000DAFF2548 000846 (v01 PmRef  Cpu0Ist  
00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DAFF2D90 000996 (v01 PmRef  CpuPm    
00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000DAFF3728 0000E8 (v01 INTEL  SNB      
00000001 INTL 00000001)
[    0.000000] ACPI: OSFR 0x00000000DAFF3810 000086 (v01 DELL   M08      
07DE0212 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000da4e4fff]
[    0.000000]   node   0: [mem 0x00000000da528000-0x00000000da792fff]
[    0.000000]   node   0: [mem 0x00000000da967000-0x00000000daa88fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[    0.000000] On node 0 totalpages: 4170254
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13906 pages used for memmap
[    0.000000]   DMA32 zone: 889970 pages, LIFO batch:31
[    0.000000]   Normal zone: 51192 pages used for memmap
[    0.000000]   Normal zone: 3276288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xda4e5000-0xda527fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda793000-0xda966fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaa89000-0xdad67fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdad68000-0xdafe7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdafe8000-0xdaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 
nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88041fa00000 s92552 r8192 
d30328 u524288
[    0.000000] pcpu-alloc: s92552 r8192 d30328 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 4104936
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.1 
root=/dev/sda5 ro slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 
intel_idle.max_cstate=c3 i915.i915_enable_rc6=1 usbcore.autosuspend=-1
[    0.000000] Booting kernel: `c3' invalid for parameter 
`intel_idle.max_cstate'
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 
bytes)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 
bytes)
[    0.000000] Memory: 16270500K/16681016K available (18368K kernel code, 
14887K rwdata, 4828K rodata, 1172K init, 15300K bss, 410516K reserved, 0K 
cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Running RCU self tests
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU lockdep checking is enabled.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:4352 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., 
Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8159 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2793.761 MHz processor
[    0.000070] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 5587.52 BogoMIPS (lpj=27937610)
[    0.000227] pid_max: default: 32768 minimum: 301
[    0.000334] ACPI: Core revision 20160108
[    0.075633] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.075737] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.075821] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 
bytes)
[    0.077010] CPU: Physical Processor ID: 0
[    0.077087] CPU: Processor Core ID: 0
[    0.077166] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.077246] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.077328] mce: CPU supports 7 MCE banks
[    0.077429] CPU0: Thermal monitoring enabled (TM1)
[    0.077516] process: using mwait in idle threads
[    0.077595] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.077674] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.078308] Freeing SMP alternatives memory: 32K (ffffffff837b0000 - 
ffffffff837b8000)
[    0.273896] DMAR: Host address width 36
[    0.273975] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.274087] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 
ecap f0101a
[    0.274200] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.274292] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 
ecap f0105a
[    0.274405] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[    0.274490] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.274577] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.274657] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.274736] DMAR-IR: Queued invalidation will be enabled to support x2apic 
and Intr-remapping.
[    0.275219] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.275300] x2apic enabled
[    0.275380] Switched APIC routing to cluster x2apic.
[    0.276304] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.376403] TSC deadline timer enabled
[    0.376407] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (family: 
0x6, model: 0x2a, stepping: 0x7)
[    0.376682] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, 
full-width counters, Intel PMU driver.
[    0.377010] perf_event_intel: PEBS disabled due to CPU errata, please 
upgrade microcode
[    0.377133] ... version:                3
[    0.377209] ... bit width:              48
[    0.377285] ... generic registers:      4
[    0.377362] ... value mask:             0000ffffffffffff
[    0.377441] ... max period:             0000ffffffffffff
[    0.377520] ... fixed-purpose events:   3
[    0.377595] ... event mask:             000000070000000f
[    0.380090] x86: Booting SMP configuration:
[    0.380170] .... node  #0, CPUs:      #1 #2 #3
[    0.388247] x86: Booted up 1 node, 4 CPUs
[    0.388398] smpboot: Total of 4 processors activated (22350.08 BogoMIPS)
[    0.392001] NMI watchdog: enabled on all CPUs, permanently consumes one 
hw-PMU counter.
[    0.392889] devtmpfs: initialized
[    0.394387] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] 
(274432 bytes)
[    0.394620] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] 
(2621440 bytes)
[    0.396259] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 19112604462750000 ns
[    0.396577] xor: automatically using best checksumming function:
[    0.488231]    avx       : 25328.800 MB/sec
[    0.488326] pinctrl core: initialized pinctrl subsystem
[    0.489115] NET: Registered protocol family 16
[    0.518357] cpuidle: using governor ladder
[    0.548335] cpuidle: using governor menu
[    0.548637] ACPI: bus type PCI registered
[    0.549134] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 
0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.549938] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.550032] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a 
huge-page mapping due to MTRR override.
[    0.550205] PCI: Using configuration type 1 for base access
[    0.551029] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, 
HT is on
[    0.608960] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.778445] raid6: sse2x1   gen()  6473 MB/s
[    0.948495] raid6: sse2x1   xor()  4944 MB/s
[    1.118551] raid6: sse2x2   gen()  8599 MB/s
[    1.288603] raid6: sse2x2   xor()  6101 MB/s
[    1.458657] raid6: sse2x4   gen() 10117 MB/s
[    1.628711] raid6: sse2x4   xor()  7747 MB/s
[    1.628790] raid6: using algorithm sse2x4 gen() 10117 MB/s
[    1.628868] raid6: .... xor() 7747 MB/s, rmw enabled
[    1.628946] raid6: using ssse3x2 recovery algorithm
[    1.629187] ACPI: Added _OSI(Module Device)
[    1.629265] ACPI: Added _OSI(Processor Device)
[    1.629343] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.629421] ACPI: Added _OSI(Processor Aggregator Device)
[    1.638090] ACPI: Executed 1 blocks of module-level executable AML code
[    1.679937] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.694297] ACPI: Dynamic OEM Table Load:
[    1.694311] ACPI: SSDT 0xFFFF88040D31C0C0 00064F (v01 PmRef  Cpu0Cst  
00003001 INTL 20051117)
[    1.699034] ACPI: Dynamic OEM Table Load:
[    1.699047] ACPI: SSDT 0xFFFF88040CCCAD08 000303 (v01 PmRef  ApIst    
00003000 INTL 20051117)
[    1.702941] ACPI: Dynamic OEM Table Load:
[    1.702952] ACPI: SSDT 0xFFFF88040D270648 000119 (v01 PmRef  ApCst    
00003000 INTL 20051117)
[    1.712681] ACPI: Interpreter enabled
[    1.712898] ACPI: (supports S0 S1 S3 S4 S5)
[    1.712976] ACPI: Using IOAPIC for interrupt routing
[    1.713302] PCI: Using host bridge windows from ACPI; if necessary, use 
"pci=nocrs" and report a bug
[    1.839934] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.840031] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM 
Segments MSI]
[    1.842175] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    1.844175] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER 
PCIeCapability]
[    1.847444] PCI host bridge to bus 0000:00
[    1.847530] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.847613] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.847696] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff 
window]
[    1.847811] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff 
window]
[    1.847925] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff 
window]
[    1.848039] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff 
window]
[    1.848151] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff 
window]
[    1.848264] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff 
window]
[    1.848378] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff 
window]
[    1.848493] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff 
window]
[    1.848605] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff 
window]
[    1.848720] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.848810] pci_bus 0000:00: scanning bus
[    1.848873] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    1.848882] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x30
[    1.849578] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    1.849594] pci 0000:00:02.0: reg 0x10: [mem 0xf6800000-0xf6bfffff 64bit]
[    1.849603] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit 
pref]
[    1.849610] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    1.850377] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    1.850412] pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[    1.850553] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.850583] pci 0000:00:16.0: PME# disabled
[    1.851222] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    1.851259] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
[    1.851423] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.851430] pci 0000:00:1a.0: PME# disabled
[    1.859085] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.859454] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    1.859492] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    1.859654] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.859660] pci 0000:00:1b.0: PME# disabled
[    1.860097] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.860454] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    1.860557] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x40
[    1.860632] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.860638] pci 0000:00:1c.0: PME# disabled
[    1.860683] pci 0000:00:1c.0: Disabling UPDCR peer decodes
[    1.860769] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    1.860849] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    1.861346] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.861703] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    1.861793] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x40
[    1.861867] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.861874] pci 0000:00:1c.1: PME# disabled
[    1.861906] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    1.861987] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    1.862478] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.862834] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    1.862924] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x40
[    1.862998] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.863005] pci 0000:00:1c.3: PME# disabled
[    1.863037] pci 0000:00:1c.3: Enabling MPC IRBNCE
[    1.863118] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[    1.863605] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.863958] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    1.864062] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x40
[    1.864140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.864146] pci 0000:00:1c.4: PME# disabled
[    1.864181] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    1.864262] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    1.864750] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    1.865105] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    1.865195] pci 0000:00:1c.7: calling pci_fixup_transparent_bridge+0x0/0x40
[    1.865270] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    1.865277] pci 0000:00:1c.7: PME# disabled
[    1.865311] pci 0000:00:1c.7: Enabling MPC IRBNCE
[    1.865391] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[    1.865878] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    1.866225] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    1.866258] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
[    1.866417] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.866424] pci 0000:00:1d.0: PME# disabled
[    1.874167] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.874522] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[    1.875358] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    1.875397] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    1.875417] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    1.875434] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    1.875450] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    1.875465] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    1.875481] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
[    1.875585] pci 0000:00:1f.2: PME# supported from D3hot
[    1.875591] pci 0000:00:1f.2: PME# disabled
[    1.876271] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    1.876306] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    1.876347] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    1.877013] pci_bus 0000:00: fixups for bus
[    1.877021] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 0
[    1.877214] pci_bus 0000:03: scanning bus
[    1.877221] pci_bus 0000:03: fixups for bus
[    1.877225] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.877324] pci_bus 0000:03: bus scan returning with max=03
[    1.877331] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 0
[    1.877514] pci_bus 0000:05: scanning bus
[    1.877558] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    1.877593] pci 0000:05:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    1.877644] pci 0000:05:00.0: reg 0x18: [mem 0xf1104000-0xf1104fff 64bit 
pref]
[    1.877675] pci 0000:05:00.0: reg 0x20: [mem 0xf1100000-0xf1103fff 64bit 
pref]
[    1.877858] pci 0000:05:00.0: supports D1 D2
[    1.877860] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.877867] pci 0000:05:00.0: PME# disabled
[    1.878042] pci 0000:05:00.0: System wakeup disabled by ACPI
[    1.889119] pci_bus 0000:05: fixups for bus
[    1.889122] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    1.889206] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    1.889220] pci 0000:00:1c.1:   bridge window [mem 0xf1100000-0xf11fffff 
64bit pref]
[    1.889222] pci_bus 0000:05: bus scan returning with max=05
[    1.889228] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 0
[    1.889412] pci_bus 0000:09: scanning bus
[    1.889684] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[    1.890094] pci 0000:09:00.0: reg 0x10: [mem 0xf7e00000-0xf7e01fff 64bit]
[    1.891749] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    1.891800] pci 0000:09:00.0: PME# disabled
[    1.892188] pci 0000:09:00.0: System wakeup disabled by ACPI
[    1.909233] pci_bus 0000:09: fixups for bus
[    1.909236] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[    1.909324] pci 0000:00:1c.3:   bridge window [mem 0xf7e00000-0xf7efffff]
[    1.909334] pci_bus 0000:09: bus scan returning with max=09
[    1.909340] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 0
[    1.909530] pci_bus 0000:0b: scanning bus
[    1.909580] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[    1.909629] pci 0000:0b:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    1.909663] pci 0000:0b:00.0: reg 0x18: [mem 0xf7d10000-0xf7d11fff 64bit]
[    1.909862] pci 0000:0b:00.0: supports D1 D2
[    1.909865] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.909872] pci 0000:0b:00.0: PME# disabled
[    1.910068] pci 0000:0b:00.0: System wakeup disabled by ACPI
[    1.910466] pci_bus 0000:0b: fixups for bus
[    1.910468] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    1.910557] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    1.910567] pci_bus 0000:0b: bus scan returning with max=0b
[    1.910573] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 0
[    1.910756] pci_bus 0000:11: scanning bus
[    1.910763] pci_bus 0000:11: fixups for bus
[    1.910767] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[    1.910854] pci 0000:00:1c.7:   bridge window [io  0xc000-0xdfff]
[    1.910859] pci 0000:00:1c.7:   bridge window [mem 0xf6c00000-0xf7cfffff]
[    1.910869] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf10fffff 
64bit pref]
[    1.910871] pci_bus 0000:11: bus scan returning with max=11
[    1.910878] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 1
[    1.910889] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 1
[    1.910901] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 1
[    1.910912] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 1
[    1.910924] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 1
[    1.910933] pci_bus 0000:00: bus scan returning with max=16
[    1.910935] pci_bus 0000:00: on NUMA node 0
[    1.914947] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.916035] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.917117] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.918201] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.919286] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) 
*0, disabled.
[    1.920459] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 
*0, disabled.
[    1.921639] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.922710] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.924997] ACPI: Enabled 4 GPEs in block 00 to 3F
[    1.925703] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.925784] vgaarb: device added: 
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.925904] vgaarb: loaded
[    1.925979] vgaarb: bridge control possible 0000:00:02.0
[    1.926980] SCSI subsystem initialized
[    1.927232] libata version 3.00 loaded.
[    1.927527] ACPI: bus type USB registered
[    1.927789] usbcore: registered new interface driver usbfs
[    1.927953] usbcore: registered new interface driver hub
[    1.928102] usbcore: registered new device driver usb
[    1.928378] Linux video capture interface: v2.00
[    1.928706] EDAC MC: Ver: 3.0.0
[    1.929479] Advanced Linux Sound Architecture Driver Initialized.
[    1.929631] PCI: Using ACPI for IRQ routing
[    1.931584] PCI: pci_cache_line_size set to 64 bytes
[    1.931594] pci 0000:00:02.0: BAR 0: reserving [mem 0xf6800000-0xf6bfffff 
flags 0x140204] (d=0, p=0)
[    1.931598] pci 0000:00:02.0: BAR 2: reserving [mem 0xe0000000-0xefffffff 
flags 0x14220c] (d=0, p=0)
[    1.931601] pci 0000:00:02.0: BAR 4: reserving [io  0xf000-0xf03f flags 
0x40101] (d=0, p=0)
[    1.931605] pci 0000:00:16.0: BAR 0: reserving [mem 0xf7f0a000-0xf7f0a00f 
flags 0x140204] (d=0, p=0)
[    1.931610] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf7f08000-0xf7f083ff 
flags 0x40200] (d=0, p=0)
[    1.931615] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf7f00000-0xf7f03fff 
flags 0x140204] (d=0, p=0)
[    1.931625] pci 0000:05:00.0: BAR 0: reserving [io  0xe000-0xe0ff flags 
0x40101] (d=0, p=0)
[    1.931627] pci 0000:05:00.0: BAR 2: reserving [mem 0xf1104000-0xf1104fff 
flags 0x14220c] (d=0, p=0)
[    1.931630] pci 0000:05:00.0: BAR 4: reserving [mem 0xf1100000-0xf1103fff 
flags 0x14220c] (d=0, p=0)
[    1.931638] pci 0000:09:00.0: BAR 0: reserving [mem 0xf7e00000-0xf7e01fff 
flags 0x140204] (d=0, p=0)
[    1.931646] pci 0000:0b:00.0: BAR 0: reserving [mem 0xf7d00000-0xf7d0ffff 
flags 0x140204] (d=0, p=0)
[    1.931648] pci 0000:0b:00.0: BAR 2: reserving [mem 0xf7d10000-0xf7d11fff 
flags 0x140204] (d=0, p=0)
[    1.931655] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf7f07000-0xf7f073ff 
flags 0x40200] (d=0, p=0)
[    1.931662] pci 0000:00:1f.2: BAR 0: reserving [io  0xf0b0-0xf0b7 flags 
0x40101] (d=0, p=0)
[    1.931665] pci 0000:00:1f.2: BAR 1: reserving [io  0xf0a0-0xf0a3 flags 
0x40101] (d=0, p=0)
[    1.931667] pci 0000:00:1f.2: BAR 2: reserving [io  0xf090-0xf097 flags 
0x40101] (d=0, p=0)
[    1.931670] pci 0000:00:1f.2: BAR 3: reserving [io  0xf080-0xf083 flags 
0x40101] (d=0, p=0)
[    1.931672] pci 0000:00:1f.2: BAR 4: reserving [io  0xf060-0xf07f flags 
0x40101] (d=0, p=0)
[    1.931675] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf7f06000-0xf7f067ff 
flags 0x40200] (d=0, p=0)
[    1.931680] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf7f05000-0xf7f050ff 
flags 0x140204] (d=0, p=0)
[    1.931682] pci 0000:00:1f.3: BAR 4: reserving [io  0xf040-0xf05f flags 
0x40101] (d=0, p=0)
[    1.931723] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    1.931733] e820: reserve RAM buffer [mem 0xda4e5000-0xdbffffff]
[    1.931736] e820: reserve RAM buffer [mem 0xda793000-0xdbffffff]
[    1.931740] e820: reserve RAM buffer [mem 0xdaa89000-0xdbffffff]
[    1.931744] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[    1.932719] Bluetooth: Core ver 2.21
[    1.932832] NET: Registered protocol family 31
[    1.932913] Bluetooth: HCI device and connection manager initialized
[    1.933016] Bluetooth: HCI socket layer initialized
[    1.933102] Bluetooth: L2CAP socket layer initialized
[    1.933216] Bluetooth: SCO socket layer initialized
[    1.934139] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.934573] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.936739] clocksource: Switched to clocksource hpet
[    1.978518] pnp: PnP ACPI init
[    1.979506] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.979592] system 00:00: [io  0x1000-0x100f] has been reserved
[    1.979677] system 00:00: [io  0xffff] has been reserved
[    1.979757] system 00:00: [io  0xffff] has been reserved
[    1.979842] system 00:00: [io  0x0400-0x0453] could not be reserved
[    1.979927] system 00:00: [io  0x0458-0x047f] has been reserved
[    1.980009] system 00:00: [io  0x0500-0x057f] has been reserved
[    1.980093] system 00:00: [io  0x164e-0x164f] has been reserved
[    1.980222] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.980471] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.980967] system 00:02: [io  0x0454-0x0457] has been reserved
[    1.981053] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 
(active)
[    1.981459] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    1.981548] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved
[    1.981633] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.981954] pnp 00:04: Plug and Play ACPI device, IDs DLL04b3 SYN0600 
SYN0002 PNP0f13 (active)
[    1.982267] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.984850] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.984940] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.985028] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.985114] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.985200] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.985286] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.985376] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.985464] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.985551] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    1.985640] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.985727] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    1.985814] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.987850] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[    1.987952] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[    1.988039] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.988458] pnp: PnP ACPI: found 8 devices
[    2.008211] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, 
max_idle_ns: 2085701024 ns
[    2.008405] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    2.008505] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    2.008587] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    2.008678] pci 0000:00:1c.1:   bridge window [mem 0xf1100000-0xf11fffff 
64bit pref]
[    2.008798] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[    2.008883] pci 0000:00:1c.3:   bridge window [mem 0xf7e00000-0xf7efffff]
[    2.008976] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    2.009061] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    2.009155] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[    2.009236] pci 0000:00:1c.7:   bridge window [io  0xc000-0xdfff]
[    2.009319] pci 0000:00:1c.7:   bridge window [mem 0xf6c00000-0xf7cfffff]
[    2.009405] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf10fffff 
64bit pref]
[    2.009527] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.009529] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.009531] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.009533] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    2.009535] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    2.009537] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    2.009539] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    2.009541] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    2.009543] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    2.009545] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[    2.009547] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
[    2.009550] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    2.009552] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit 
pref]
[    2.009554] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[    2.009556] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    2.009558] pci_bus 0000:11: resource 0 [io  0xc000-0xdfff]
[    2.009560] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[    2.009562] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit 
pref]
[    2.009695] NET: Registered protocol family 2
[    2.010606] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[    2.010909] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[    2.014521] TCP: Hash tables configured (established 131072 bind 65536)
[    2.014715] UDP hash table entries: 8192 (order: 8, 1310720 bytes)
[    2.015730] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes)
[    2.016961] NET: Registered protocol family 1
[    2.017497] RPC: Registered named UNIX socket transport module.
[    2.017578] RPC: Registered udp transport module.
[    2.017656] RPC: Registered tcp transport module.
[    2.017734] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.017833] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe0
[    2.017837] pci 0000:00:02.0: Video device with shadowed ROM
[    2.017846] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x820
[    2.137644] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x820
[    2.257651] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x820
[    2.259022] PCI: CLS 64 bytes, default 64
[    2.259426] DMAR: No ATSR found
[    2.259674] DMAR: dmar0: Using Queued invalidation
[    2.259982] DMAR: dmar1: Using Queued invalidation
[    2.260077] DMAR: Setting RMRR:
[    2.260240] DMAR: Setting identity map for device 0000:00:02.0 [0xdb800000 - 
0xdf9fffff]
[    2.260728] DMAR: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 
0xdad61fff]
[    2.260879] DMAR: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 
0xdad61fff]
[    2.261003] DMAR: Prepare 0-16MiB unity mapping for LPC
[    2.261810] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 
0xffffff]
[    2.262201] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    2.262899] iommu: Adding device 0000:00:00.0 to group 0
[    2.263070] iommu: Adding device 0000:00:02.0 to group 1
[    2.263241] iommu: Adding device 0000:00:16.0 to group 2
[    2.263400] iommu: Adding device 0000:00:1a.0 to group 3
[    2.263558] iommu: Adding device 0000:00:1b.0 to group 4
[    2.263716] iommu: Adding device 0000:00:1c.0 to group 5
[    2.263875] iommu: Adding device 0000:00:1c.1 to group 6
[    2.264032] iommu: Adding device 0000:00:1c.3 to group 7
[    2.264186] iommu: Adding device 0000:00:1c.4 to group 8
[    2.264344] iommu: Adding device 0000:00:1c.7 to group 9
[    2.264499] iommu: Adding device 0000:00:1d.0 to group 10
[    2.264677] iommu: Adding device 0000:00:1f.0 to group 11
[    2.264808] iommu: Adding device 0000:00:1f.2 to group 11
[    2.264939] iommu: Adding device 0000:00:1f.3 to group 11
[    2.265096] iommu: Adding device 0000:05:00.0 to group 12
[    2.265250] iommu: Adding device 0000:09:00.0 to group 13
[    2.265401] iommu: Adding device 0000:0b:00.0 to group 14
[    2.269064] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 
163840 ms ovfl timer
[    2.269179] hw unit of domain pp0-core 2^-16 Joules
[    2.269258] hw unit of domain package 2^-16 Joules
[    2.269336] hw unit of domain pp1-gpu 2^-16 Joules
[    2.279757] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    2.279971] audit: initializing netlink subsys (disabled)
[    2.280112] audit: type=2000 audit(1461196861.090:1): initialized
[    2.318275] NET: Registered protocol family 38
[    2.318449] Key type asymmetric registered
[    2.318547] Asymmetric key parser 'x509' registered
[    2.318941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
250)
[    2.319080] io scheduler noop registered
[    2.319167] io scheduler deadline registered (default)
[    2.319713] io scheduler cfq registered
[    2.319799] start plist test
[    2.322215] end plist test
[    2.326073] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.326202] pciehp 0000:00:1c.7:pcie04: Slot Capabilities      : 0x003cb260
[    2.326286] pciehp 0000:00:1c.7:pcie04: Slot Status            : 0x0000
[    2.326369] pciehp 0000:00:1c.7:pcie04: Slot Control           : 0x0000
[    2.326455] pciehp 0000:00:1c.7:pcie04: Slot #7 AttnBtn- PwrCtrl- MRL- 
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    2.326739] pci_bus 0000:11: dev 00, created physical slot 7
[    2.327003] pciehp 0000:00:1c.7:pcie04: pcie_enable_notification: SLOTCTRL 
58 write cmd 1038
[    2.327012] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 
value read 1028
[    2.327016] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[    2.327075] pciehp: pcie_port_service_register = 0
[    2.327078] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.327364] intel_idle: MWAIT substates: 0x21120
[    2.327367] intel_idle: v0.4.1 model 0x2A
[    2.327369] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.329731] ACPI: AC Adapter [AC] (on-line)
[    2.330371] input: Lid Switch as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.332128] ACPI: Lid Switch [LID0]
[    2.332454] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.332608] ACPI: Power Button [PWRB]
[    2.332928] input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.333049] ACPI: Sleep Button [SBTN]
[    2.333362] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.333493] ACPI: Power Button [PWRF]
[    2.363284] thermal LNXTHERM:00: registered as thermal_zone0
[    2.363368] ACPI: Thermal Zone [THM] (62 C)
[    2.363734] GHES: HEST is not enabled!
[    2.363819] ERST DBG: ERST support is disabled.
[    2.421799] ACPI: Battery Slot [BAT0] (battery present)
[    2.473017] Non-volatile memory driver v1.3
[    2.473457] Linux agpgart interface v0.103
[    2.473635] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, 
margin is 60 seconds).
[    2.473711] [drm] Initialized drm 1.1.0 20060810
[    2.478142] [drm] Memory usable by graphics device = 2048M
[    2.478223] [drm] VT-d active for gfx access
[    2.478300] [drm] Disabling PPGTT because VT-d is on
[    2.478408] [drm] Replacing VGA console driver
[    2.479272] Console: switching to colour dummy device 80x25
[    2.486901] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.486910] [drm] Driver supports precise vblank timestamp query.
[    2.486998] [drm] DMAR active, disabling use of stolen memory
[    2.488906] vgaarb: device changed decodes: 
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.519536] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.523200] acpi device:34: registered as cooling_device4
[    2.523937] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.524158] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[    2.536601] loop: module loaded
[    2.548670] ACPI Warning: SystemIO range 
0x0000000000000428-0x000000000000042F conflicts with OpRegion 
0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255)
[    2.548680] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[    2.548700] ACPI Warning: SystemIO range 
0x0000000000000540-0x000000000000054F conflicts with OpRegion 
0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    2.548708] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[    2.548723] ACPI Warning: SystemIO range 
0x0000000000000530-0x000000000000053F conflicts with OpRegion 
0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    2.548730] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[    2.548746] ACPI Warning: SystemIO range 
0x0000000000000500-0x000000000000052F conflicts with OpRegion 
0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    2.548752] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[    2.548763] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.549126] Loading iSCSI transport class v2.0-870.
[    2.550311] ahci 0000:00:1f.2: version 3.0
[    2.551172] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.561375] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 
impl SATA mode
[    2.561389] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio 
slum part ems sxs apst 
[    2.603034] scsi host0: ahci
[    2.604239] scsi host1: ahci
[    2.604816] scsi host2: ahci
[    2.605381] scsi host3: ahci
[    2.605963] scsi host4: ahci
[    2.606521] scsi host5: ahci
[    2.607047] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 
irq 29
[    2.607058] ata2: DUMMY
[    2.607063] ata3: DUMMY
[    2.607068] ata4: DUMMY
[    2.607074] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 
irq 29
[    2.607085] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 
irq 29
[    2.608132] tun: Universal TUN/TAP device driver, 1.6
[    2.608143] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[    2.608572] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.608891] r8169 0000:05:00.0: enabling Mem-Wr-Inval
[    2.609997] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000030000, 
18:03:73:a0:6f:6a, XID 0c200000 IRQ 30
[    2.610010] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx 
checksumming: ko]
[    2.610168] VMware vmxnet3 virtual NIC driver - version 1.4.6.0-k-NAPI
[    2.610469] usbcore: registered new interface driver cdc_ncm
[    2.610575] usbcore: registered new interface driver huawei_cdc_ncm
[    2.610683] usbcore: registered new interface driver cdc_mbim
[    2.610779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.610808] ehci-pci: EHCI PCI platform driver
[    2.611538] ehci-pci 0000:00:1a.0: enabling bus mastering
[    2.611598] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.611755] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus 
number 1
[    2.611824] ehci-pci 0000:00:1a.0: debug port 2
[    2.615814] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.615899] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
[    2.624317] fbcon: inteldrmfb (fb0) is primary device
[    2.636893] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.637446] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.637448] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    2.637449] usb usb1: Product: EHCI Host Controller
[    2.637451] usb usb1: Manufacturer: Linux 4.5.1-default-pciehp ehci_hcd
[    2.637452] usb usb1: SerialNumber: 0000:00:1a.0
[    2.638784] hub 1-0:1.0: USB hub found
[    2.638842] 
================================================================================
[    2.638843] UBSAN: Undefined behaviour in drivers/usb/host/ehci-hub.c:873:47
[    2.638844] index -1 is out of range for type 'u32 [1]'
[    2.638846] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.5.1-default-pciehp #1
[    2.638847] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[    2.638850]  ffffffffffffffff ffff88040d9db368 ffffffff816d10b5 
ffffffff8119e142
[    2.638852]  ffff88040d9db390 ffffffffffffffff ffff88040d9db380 
ffffffff81752d6d
[    2.638854]  ffffffff83175b20 ffff88040d9db3d0 ffffffff81753427 
0000000000000296
[    2.638854] Call Trace:
[    2.638858]  [<ffffffff816d10b5>] dump_stack+0x68/0xa3
[    2.638862]  [<ffffffff8119e142>] ? down_trylock+0x32/0x60
[    2.638864]  [<ffffffff81752d6d>] ubsan_epilogue+0xd/0x40
[    2.638866]  [<ffffffff81753427>] __ubsan_handle_out_of_bounds+0x67/0x70
[    2.638868]  [<ffffffff811a4a5d>] ? mark_held_locks+0x8d/0x150
[    2.638871]  [<ffffffff81bd3ead>] ehci_hub_control+0x121d/0x1310
[    2.638874]  [<ffffffff81baa99e>] ? usb_hcd_submit_urb+0x31e/0xd60
[    2.638877]  [<ffffffff81336160>] ? __kmalloc+0x100/0x310
[    2.638878]  [<ffffffff811a4ccc>] ? trace_hardirqs_on_caller+0x1ac/0x2c0
[    2.638880]  [<ffffffff81baa99e>] ? usb_hcd_submit_urb+0x31e/0xd60
[    2.638882]  [<ffffffff81baae3d>] usb_hcd_submit_urb+0x7bd/0xd60
[    2.638884]  [<ffffffff8133a006>] ? __kmem_cache_shrink+0x3e6/0x730
[    2.638887]  [<ffffffff81bace6e>] usb_submit_urb+0x29e/0x990
[    2.638889]  [<ffffffff81bade53>] usb_start_wait_urb+0x63/0x1a0
[    2.638892]  [<ffffffff81bae04c>] usb_control_msg+0xbc/0xf0
[    2.638895]  [<ffffffff81ba5609>] hub_probe+0x499/0x13c0
[    2.638898]  [<ffffffff81bb4645>] usb_probe_interface+0x165/0x450
[    2.638901]  [<ffffffff81a65903>] driver_probe_device+0x123/0x6f0
[    2.638904]  [<ffffffff81a66086>] __device_attach_driver+0xc6/0x170
[    2.638906]  [<ffffffff81a65fc0>] ? __driver_attach+0xf0/0xf0
[    2.638908]  [<ffffffff81a62912>] bus_for_each_drv+0x72/0xd0
[    2.638910]  [<ffffffff81a65651>] __device_attach+0xc1/0x170
[    2.638912]  [<ffffffff81a6617e>] device_initial_probe+0xe/0x10
[    2.638914]  [<ffffffff81a64113>] bus_probe_device+0xd3/0x130
[    2.638917]  [<ffffffff81a60f09>] device_add+0x4d9/0x6c0
[    2.638921]  [<ffffffff81bb10f9>] usb_set_configuration+0x579/0xc70
[    2.638924]  [<ffffffff81bc2801>] generic_probe+0x31/0xa0
[    2.638925]  [<ffffffff81bb4477>] usb_probe_device+0x47/0xb0
[    2.638926]  [<ffffffff81a65903>] driver_probe_device+0x123/0x6f0
[    2.638928]  [<ffffffff81a66086>] __device_attach_driver+0xc6/0x170
[    2.638929]  [<ffffffff81a65fc0>] ? __driver_attach+0xf0/0xf0
[    2.638930]  [<ffffffff81a62912>] bus_for_each_drv+0x72/0xd0
[    2.638932]  [<ffffffff81a65651>] __device_attach+0xc1/0x170
[    2.638933]  [<ffffffff81a6617e>] device_initial_probe+0xe/0x10
[    2.638934]  [<ffffffff81a64113>] bus_probe_device+0xd3/0x130
[    2.638936]  [<ffffffff81a60f09>] device_add+0x4d9/0x6c0
[    2.638938]  [<ffffffff81ba1993>] usb_new_device+0x2e3/0x830
[    2.638940]  [<ffffffff81ba9257>] usb_add_hcd+0x6d7/0xbb0
[    2.638942]  [<ffffffff81bc5ece>] usb_hcd_pci_probe+0x30e/0x630
[    2.638943]  [<ffffffff811a4ded>] ? trace_hardirqs_on+0xd/0x10
[    2.638945]  [<ffffffff81bdf081>] ehci_pci_probe+0x31/0x40
[    2.638948]  [<ffffffff8176cc50>] pci_device_probe+0xb0/0x160
[    2.638950]  [<ffffffff81a65903>] driver_probe_device+0x123/0x6f0
[    2.638951]  [<ffffffff81a65f78>] __driver_attach+0xa8/0xf0
[    2.638952]  [<ffffffff81a65ed0>] ? driver_probe_device+0x6f0/0x6f0
[    2.638954]  [<ffffffff81a6283b>] bus_for_each_dev+0x6b/0xb0
[    2.638955]  [<ffffffff81a64df2>] driver_attach+0x22/0x40
[    2.638956]  [<ffffffff81a6458a>] bus_add_driver+0x17a/0x350
[    2.638959]  [<ffffffff836fa5fe>] ? ehci_hcd_init+0xc3/0xc3
[    2.638961]  [<ffffffff81a66fd8>] driver_register+0x78/0x130
[    2.638963]  [<ffffffff8176a842>] __pci_register_driver+0x72/0xb0
[    2.638964]  [<ffffffff836fa663>] ehci_pci_init+0x65/0x67
[    2.638967]  [<ffffffff810003ef>] do_one_initcall+0xbf/0x250
[    2.638969]  [<ffffffff836a36cb>] kernel_init_freeable+0x248/0x2de
[    2.638972]  [<ffffffff821e0c60>] ? rest_init+0x160/0x160
[    2.638973]  [<ffffffff821e0c69>] kernel_init+0x9/0xe0
[    2.638975]  [<ffffffff821eb9ff>] ret_from_fork+0x3f/0x70
[    2.638977]  [<ffffffff821e0c60>] ? rest_init+0x160/0x160
[    2.638977] 
================================================================================
[    2.639020] hub 1-0:1.0: 2 ports detected
[    2.641055] ehci-pci 0000:00:1d.0: enabling bus mastering
[    2.641071] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.641094] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus 
number 2
[    2.641117] ehci-pci 0000:00:1d.0: debug port 2
[    2.645080] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.645139] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
[    2.656952] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.657223] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.657224] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    2.657226] usb usb2: Product: EHCI Host Controller
[    2.657227] usb usb2: Manufacturer: Linux 4.5.1-default-pciehp ehci_hcd
[    2.657228] usb usb2: SerialNumber: 0000:00:1d.0
[    2.658097] hub 2-0:1.0: USB hub found
[    2.658133] hub 2-0:1.0: 2 ports detected
[    2.659031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.659047] ohci-pci: OHCI PCI platform driver
[    2.659158] uhci_hcd: USB Universal Host Controller Interface driver
[    2.659983] xhci_hcd 0000:0b:00.0: enabling bus mastering
[    2.660000] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    2.660025] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus 
number 3
[    2.660362] xhci_hcd 0000:0b:00.0: hcc params 0x0270f06d hci version 0x96 
quirks 0x00000000
[    2.660368] xhci_hcd 0000:0b:00.0: enabling Mem-Wr-Inval
[    2.661123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.661124] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    2.661126] usb usb3: Product: xHCI Host Controller
[    2.661127] usb usb3: Manufacturer: Linux 4.5.1-default-pciehp xhci-hcd
[    2.661128] usb usb3: SerialNumber: 0000:0b:00.0
[    2.661842] hub 3-0:1.0: USB hub found
[    2.661892] hub 3-0:1.0: 2 ports detected
[    2.662663] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    2.662676] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus 
number 4
[    2.662797] usb usb4: We don't know the algorithms for LPM for this host, 
disabling LPM.
[    2.662942] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.662943] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    2.662944] usb usb4: Product: xHCI Host Controller
[    2.662946] usb usb4: Manufacturer: Linux 4.5.1-default-pciehp xhci-hcd
[    2.662947] usb usb4: SerialNumber: 0000:0b:00.0
[    2.663837] hub 4-0:1.0: USB hub found
[    2.663912] hub 4-0:1.0: 2 ports detected
[    2.664863] usbcore: registered new interface driver cdc_wdm
[    2.665078] usbcore: registered new interface driver usbserial
[    2.665318] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 
0x60,0x64 irq 1,12
[    2.667919] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.667973] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.669218] mousedev: PS/2 mouse device common for all mice
[    2.671301] rtc_cmos 00:01: RTC can wake from S4
[    2.671775] rtc rtc0: rtc_cmos: dev (252:0)
[    2.671784] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.671840] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, 
hpet irqs
[    2.671972] i2c /dev entries driver
[    2.674316] ACPI Warning: SystemIO range 
0x000000000000F040-0x000000000000F05F conflicts with OpRegion 
0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) 
(20160108/utaddress-255)
[    2.674318] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[    2.675187] coretemp coretemp.0: TjMax is 100 degrees C
[    2.675261] coretemp coretemp.0: TjMax is 100 degrees C
[    2.675324] coretemp coretemp.0: TjMax is 100 degrees C
[    2.684066] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.684141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, 
TCOBASE=0x0460)
[    2.684937] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.684991] iTCO_vendor_support: vendor-support=0
[    2.685001] md: linear personality registered for level -1
[    2.685025] md: raid0 personality registered for level 0
[    2.685034] md: raid1 personality registered for level 1
[    2.685043] md: raid10 personality registered for level 10
[    2.685349] md: raid6 personality registered for level 6
[    2.685350] md: raid5 personality registered for level 5
[    2.685351] md: raid4 personality registered for level 4
[    2.686366] device-mapper: uevent: version 1.0.3
[    2.687158] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: 
dm-de...@redhat.com
[    2.688154] Intel P-state driver initializing.
[    2.693246] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input5
[    2.705855] hidraw: raw HID events driver (C) Jiri Kosina
[    2.707321] usbcore: registered new interface driver usbhid
[    2.707323] usbhid: USB HID core driver
[    2.715727] NET: Registered protocol family 17
[    2.717501] Bluetooth: RFCOMM TTY layer initialized
[    2.717524] Bluetooth: RFCOMM socket layer initialized
[    2.717549] Bluetooth: RFCOMM ver 1.11
[    2.717587] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.717588] Bluetooth: BNEP filters: protocol multicast
[    2.717608] Bluetooth: BNEP socket layer initialized
[    2.717628] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.717647] Bluetooth: HIDP socket layer initialized
[    2.717849] Key type dns_resolver registered
[    2.722619] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[    2.722721] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[    2.722777] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[    2.722854] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[    2.723369] microcode: Microcode Update Driver: v2.01 
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[    2.723506] AVX version of gcm_enc/dec engaged.
[    2.723508] AES CTR mode by8 optimization enabled
[    2.729872] registered taskstats version 1
[    2.732322] Key type encrypted registered
[    2.735882] rtc_cmos 00:01: setting system clock to 2016-04-21 00:01:01 UTC 
(1461196861)
[    2.735896] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.735897] EDD information not available.
[    2.738211] PM: Checking hibernation image partition /dev/sda6
[    2.749688] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD87B1/3: 
line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    2.749693] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[    2.749698] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    2.749701] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    2.749704] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    2.749709] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    2.749713] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[    2.801530] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.807005] input: HDA Intel PCH Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.808024] input: HDA Intel PCH Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.809079] input: HDA Intel PCH HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.930605] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.942947] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device 
(Stat=0x51 Err=0x04)
[    2.943366] ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BC10001, max UDMA/133
[    2.943371] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), 
AA
[    2.955471] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device 
(Stat=0x51 Err=0x04)
[    2.955774] ata1.00: configured for UDMA/133
[    2.956800] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.976893] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    2.977022] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.047265] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    3.108016] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    3.108021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.111238] hub 1-1:1.0: USB hub found
[    3.111553] hub 1-1:1.0: 6 ports detected
[    3.123088] usb 3-2: New USB device found, idVendor=2109, idProduct=2812
[    3.123093] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.123096] usb 3-2: Product: USB2.0 Hub             
[    3.123099] usb 3-2: Manufacturer: VIA Labs, Inc.         
[    3.128017] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.128022] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.130171] hub 2-1:1.0: USB hub found
[    3.130619] hub 2-1:1.0: 8 ports detected
[    3.143788] hub 3-2:1.0: USB hub found
[    3.144378] hub 3-2:1.0: 4 ports detected
[    3.267069] tsc: Refined TSC clocksource calibration: 2793.652 MHz
[    3.267075] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x2844d424da3, max_idle_ns: 440795288311 ns
[    3.301986] usb 4-2: New USB device found, idVendor=2109, idProduct=0812
[    3.301991] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.301995] usb 4-2: Product: USB3.0 Hub             
[    3.301998] usb 4-2: Manufacturer: VIA Labs, Inc.         
[    3.320214] hub 4-2:1.0: USB hub found
[    3.320637] hub 4-2:1.0: 4 ports detected
[    3.396864] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[    3.416860] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    3.436940] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[    3.540820] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[    3.540824] usb 2-1.6: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    3.540827] usb 2-1.6: Product: USB2.0-CRW
[    3.540830] usb 2-1.6: Manufacturer: Generic
[    3.540832] usb 2-1.6: SerialNumber: 20090516388200000
[    3.553884] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2812
[    3.553888] usb 3-2.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    3.553891] usb 3-2.1: Product: USB2.0 Hub             
[    3.553894] usb 3-2.1: Manufacturer: VIA Labs, Inc.         
[    3.559831] hub 3-2.1:1.0: USB hub found
[    3.560459] hub 3-2.1:1.0: 4 ports detected
[    3.655119] Console: switching to colour frame buffer device 170x48
[    3.656744] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[    3.680466] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[    3.680469] usb 1-1.5: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    3.680472] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[    3.680475] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[    3.696932] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[    3.800863] usb 3-2.4: New USB device found, idVendor=2109, idProduct=2812
[    3.800865] usb 3-2.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    3.800867] usb 3-2.4: Product: USB2.0 Hub             
[    3.800869] usb 3-2.4: Manufacturer: VIA Labs, Inc.         
[    3.815323] hub 3-2.4:1.0: USB hub found
[    3.815979] hub 3-2.4:1.0: 4 ports detected
[    3.875557] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.878484] input: AlpsPS/2 ALPS GlidePoint as 
/devices/platform/i8042/serio1/input/input7
[    3.928986] scsi 0:0:0:0: Direct-Access     ATA      ST2000LM003 HN-M 0001 
PQ: 0 ANSI: 5
[    3.951559] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0812
[    3.954704] usb 4-2.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    3.957874] usb 4-2.1: Product: USB3.0 Hub             
[    3.960743] usb 4-2.1: Manufacturer: VIA Labs, Inc.         
[    3.975917] hub 4-2.1:1.0: USB hub found
[    3.979199] hub 4-2.1:1.0: 4 ports detected
[    4.001598] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 
TB/1.82 TiB)
[    4.001649] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.008670] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.012042] sd 0:0:0:0: [sda] Write Protect is off
[    4.014716] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.014870] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.067038] usb 4-2.2: new SuperSpeed USB device number 4 using xhci_hcd
[    4.091354]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    4.093762] usb 4-2.2: New USB device found, idVendor=174c, idProduct=5106
[    4.093768] usb 4-2.2: New USB device strings: Mfr=2, Product=3, 
SerialNumber=1
[    4.093773] usb 4-2.2: Product: AS2105
[    4.093777] usb 4-2.2: Manufacturer: ASMedia
[    4.093782] usb 4-2.2: SerialNumber:             Z1F1YB3K
[    4.123502] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.146857] usb 3-2.4.3: new low-speed USB device number 5 using xhci_hcd
[    4.177086] usb 4-2.4: new SuperSpeed USB device number 5 using xhci_hcd
[    4.267594] clocksource: Switched to clocksource tsc
[    4.306810] usb 3-2.4.3: New USB device found, idVendor=046d, idProduct=c050
[    4.310419] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    4.314031] usb 3-2.4.3: Product: USB-PS/2 Optical Mouse
[    4.317759] usb 3-2.4.3: Manufacturer: Logitech
[    4.327890] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.335065] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[    4.341016] input: Logitech USB-PS/2 Optical Mouse as 
/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.0/0003:046D:C050.0001/input/input12
[    4.342431] ata5.00: configured for UDMA/100
[    4.353544] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-2.4.3/input0
[    4.361701] scsi 4:0:0:0: CD-ROM            PLDS     DVD+-RW DS-8A8SH KD11 
PQ: 0 ANSI: 5
[    4.410926] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw 
xa/form2 cdda tray
[    4.414080] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.419173] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    4.419996] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    4.430883] usb 4-2.4: New USB device found, idVendor=2109, idProduct=0812
[    4.433672] usb 4-2.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    4.436431] usb 4-2.4: Product: USB3.0 Hub             
[    4.439223] usb 4-2.4: Manufacturer: VIA Labs, Inc.         
[    4.456064] hub 4-2.4:1.0: USB hub found
[    4.459719] hub 4-2.4:1.0: 4 ports detected
[    4.486920] usb 3-2.4.4: new low-speed USB device number 6 using xhci_hcd
[    4.516952] usb 4-2.1.1: new SuperSpeed USB device number 6 using xhci_hcd
[    4.543115] usb 4-2.1.1: New USB device found, idVendor=174c, idProduct=55aa
[    4.547251] usb 4-2.1.1: New USB device strings: Mfr=2, Product=3, 
SerialNumber=1
[    4.551164] usb 4-2.1.1: Product: ASMT1051
[    4.554984] usb 4-2.1.1: Manufacturer: asmedia
[    4.558784] usb 4-2.1.1: SerialNumber: 123456789012
[    4.659893] usb 3-2.4.4: New USB device found, idVendor=04f2, idProduct=0116
[    4.664085] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    4.668288] usb 3-2.4.4: Product: USB Keyboard
[    4.672095] usb 3-2.4.4: Manufacturer: CHICONY
[    4.688860] input: CHICONY USB Keyboard as 
/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/0003:04F2:0116.0002/input/input13
[    4.738878] ata6: SATA link down (SStatus 0 SControl 300)
[    4.743487] PM: Hibernation image partition 8:6 present
[    4.743494] PM: Looking for hibernation image.
[    4.744525] PM: Image not found (code -22)
[    4.744532] PM: Hibernation image not present or could not be loaded.
[    4.744627] ALSA device list:
[    4.748400]   #0: HDA Intel PCH at 0xf7f00000 irq 36
[    4.758124] hid-generic 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 
Keyboard [CHICONY USB Keyboard] on usb-0000:0b:00.0-2.4.4/input0
[    4.764068] md: Waiting for all devices to be available before autodetect
[    4.770029] md: If you don't use raid, use raid=noautodetect
[    4.780417] md: Autodetecting RAID arrays.
[    4.785448] md: Scanned 0 and added 0 devices.
[    4.790984] md: autorun ...
[    4.795479] md: ... autorun DONE.
[    4.828292] EXT4-fs (sda5): couldn't mount as ext3 due to feature 
incompatibilities
[    4.847272] usb 4-2.4.2: new SuperSpeed USB device number 7 using xhci_hcd
[    4.863790] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    4.867955] EXT4-fs (sda5): write access will be enabled during recovery
[    4.873102] usb 4-2.4.2: New USB device found, idVendor=174c, idProduct=55aa
[    4.877122] usb 4-2.4.2: New USB device strings: Mfr=2, Product=3, 
SerialNumber=1
[    4.880910] usb 4-2.4.2: Product: ASMT1051
[    4.884255] usb 4-2.4.2: Manufacturer: asmedia
[    4.887649] usb 4-2.4.2: SerialNumber: 123456789012
[    6.417992] random: nonblocking pool is initialized
[    8.551719] 
================================================================================
[    8.553620] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2612:15
[    8.555436] shift exponent 4294967295 is too large for 32-bit type 'int'
[    8.557214] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.5.1-default-pciehp #1
[    8.557216] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[    8.557217]  ffffffff82baa83e ffff88040d9dba28 ffffffff816d10b5 
ffffffff811c1a4a
[    8.557221]  ffff88040d9dba58 0000000000000001 ffff88040d9dba40 
ffffffff81752d6d
[    8.557224]  00000000ffffffff ffff88040d9dbad0 ffffffff8175337b 
ffffffff84677ef0
[    8.557227] Call Trace:
[    8.557233]  [<ffffffff816d10b5>] dump_stack+0x68/0xa3
[    8.557237]  [<ffffffff811c1a4a>] ? console_unlock+0x1da/0x640
[    8.557240]  [<ffffffff81752d6d>] ubsan_epilogue+0xd/0x40
[    8.557243]  [<ffffffff8175337b>] 
__ubsan_handle_shift_out_of_bounds+0xeb/0x130
[    8.557247]  [<ffffffff82003539>] ? l2cap_security_cfm+0x29/0x670
[    8.557250]  [<ffffffff811a4ded>] ? trace_hardirqs_on+0xd/0x10
[    8.557254]  [<ffffffff814a608f>] ext4_mb_init+0x99f/0xa90
[    8.557256]  [<ffffffff814aaf48>] ? ext4_setup_system_zone+0x198/0x340
[    8.557260]  [<ffffffff81479243>] ext4_fill_super+0x34d3/0x4c00
[    8.557263]  [<ffffffff81356bbd>] mount_bdev+0x18d/0x1f0
[    8.557266]  [<ffffffff81475d70>] ? ext4_calculate_overhead+0x890/0x890
[    8.557270]  [<ffffffff814576c0>] ext4_mount+0x10/0x20
[    8.557272]  [<ffffffff81357a09>] mount_fs+0x29/0x120
[    8.557275]  [<ffffffff81387c96>] vfs_kern_mount+0x66/0x1e0
[    8.557277]  [<ffffffff813855cb>] ? get_fs_type+0x6b/0xf0
[    8.557280]  [<ffffffff8138c2bb>] do_mount+0x24b/0x16e0
[    8.557283]  [<ffffffff8133ab43>] ? __kmalloc_track_caller+0xf3/0x310
[    8.557286]  [<ffffffff8138dcf0>] SyS_mount+0x90/0xd0
[    8.557290]  [<ffffffff836a3b9e>] mount_block_root+0x1da/0x332
[    8.557293]  [<ffffffff8136198a>] ? done_path_create+0x4a/0x70
[    8.557296]  [<ffffffff8136ca85>] ? SyS_mknod+0x175/0x2a0
[    8.557298]  [<ffffffff836a3df7>] mount_root+0x101/0x10a
[    8.557300]  [<ffffffff836a3f3a>] prepare_namespace+0x13a/0x172
[    8.557302]  [<ffffffff836a374d>] kernel_init_freeable+0x2ca/0x2de
[    8.557306]  [<ffffffff821e0c60>] ? rest_init+0x160/0x160
[    8.557308]  [<ffffffff821e0c69>] kernel_init+0x9/0xe0
[    8.557311]  [<ffffffff821eb9ff>] ret_from_fork+0x3f/0x70
[    8.557313]  [<ffffffff821e0c60>] ? rest_init+0x160/0x160
[    8.557314] 
================================================================================
[    8.577911] EXT4-fs (sda5): orphan cleanup on readonly fs
[    9.505046] EXT4-fs (sda5): 87 orphan inodes deleted
[    9.508647] EXT4-fs (sda5): recovery complete
[   10.585932] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: 
(null)
[   10.591299] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[   10.627760] devtmpfs: mounted
[   10.635884] Freeing unused kernel memory: 1172K (ffffffff8368b000 - 
ffffffff837b0000)
[   10.640558] Write protecting the kernel read-only data: 24576k
[   10.646916] Freeing unused kernel memory: 52K (ffff8800021f3000 - 
ffff880002200000)
[   10.659778] Freeing unused kernel memory: 1316K (ffff8800026b7000 - 
ffff880002800000)
[   18.697735] systemd-udevd[2624]: starting version 228
[   20.140416] r8169 0000:05:00.0 enp5s0: renamed from eth0
[   20.184554] systemd-udevd[2683]: Process 'net.sh eth0 start' failed with 
exit code 1.
[   20.715150] Intel(R) Wireless WiFi driver for Linux
[   20.715153] Copyright(c) 2003- 2015 Intel Corporation
[   20.862945] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1 op_mode 
iwldvm
[   21.460819] usb-storage 4-2.2:1.0: USB Mass Storage device detected
[   21.461505] scsi host6: usb-storage 4-2.2:1.0
[   21.462431] usb-storage 4-2.1.1:1.0: USB Mass Storage device detected
[   21.462917] usb-storage 4-2.1.1:1.0: Quirks match for vid 174c pid 55aa: 
400000
[   21.463038] scsi host7: usb-storage 4-2.1.1:1.0
[   21.463896] usb-storage 4-2.4.2:1.0: USB Mass Storage device detected
[   21.464188] usb-storage 4-2.4.2:1.0: Quirks match for vid 174c pid 55aa: 
400000
[   21.464309] scsi host8: usb-storage 4-2.4.2:1.0
[   21.465199] usbcore: registered new interface driver usb-storage
[   21.564478] usbcore: registered new interface driver uas
[   21.940194] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   21.940207] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   21.940213] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   21.940222] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 
1030 BGN, REV=0xB0
[   21.940648] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled
[   21.947987] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio.
[   21.964255] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   22.022582] ums-realtek 2-1.6:1.0: USB Mass Storage device detected
[   22.038693] scsi host9: usb-storage 2-1.6:1.0
[   22.039910] usbcore: registered new interface driver ums-realtek
[   22.147616] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD 
(05ca:1820)
[   22.151204] input: Laptop_Integrated_Webcam_FHD as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[   22.152508] usbcore: registered new interface driver uvcvideo
[   22.152513] USB Video Class driver (1.1.1)
[   22.183979] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0
[   22.216626] systemd-udevd[2687]: Process 'net.sh wlan0 start' failed with 
exit code 1.
[   22.458839] scsi 6:0:0:0: Direct-Access     ST3000VX 000-1CU166       CV22 
PQ: 0 ANSI: 5
[   22.459921] scsi 8:0:0:0: Direct-Access     asmedia  ASMT1051         0    
PQ: 0 ANSI: 6
[   22.460293] scsi 7:0:0:0: Direct-Access     asmedia  ASMT1051         0    
PQ: 0 ANSI: 6
[   22.462853] sd 7:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 
TB/2.73 TiB)
[   22.462861] sd 7:0:0:0: [sdb] 4096-byte physical blocks
[   22.463458] sd 7:0:0:0: [sdb] Write Protect is off
[   22.463467] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   22.464075] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   22.472865] sd 7:0:0:0: Attached scsi generic sg2 type 0
[   22.473073] sd 8:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 
TB/2.73 TiB)
[   22.473077] sd 8:0:0:0: [sdc] 4096-byte physical blocks
[   22.477279] sd 8:0:0:0: [sdc] Write Protect is off
[   22.477288] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
[   22.477994] sd 6:0:0:0: [sdd] Very big device. Trying to use READ 
CAPACITY(16).
[   22.478385] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 
TB/2.73 TiB)
[   22.479143] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   22.479883] sd 6:0:0:0: [sdd] Write Protect is off
[   22.479891] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[   22.481801] sd 6:0:0:0: [sdd] No Caching mode page found
[   22.481806] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[   22.484304] sd 6:0:0:0: [sdd] Very big device. Trying to use READ 
CAPACITY(16).
[   22.484475] sd 8:0:0:0: Attached scsi generic sg3 type 0
[   22.485053] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   22.544167]  sdd: sdd1
[   22.552302] sd 6:0:0:0: [sdd] Very big device. Trying to use READ 
CAPACITY(16).
[   22.553416] sd 6:0:0:0: [sdd] Attached SCSI disk
[   22.631596] EXT4-fs (sda5): re-mounted. Opts: (null)
[   23.043590] scsi 9:0:0:0: Direct-Access     Generic- Multi-Card       1.00 
PQ: 0 ANSI: 0 CCS
[   23.044961] sd 9:0:0:0: Attached scsi generic sg5 type 0
[   23.722887] sd 9:0:0:0: [sde] 62333952 512-byte logical blocks: (31.9 
GB/29.7 GiB)
[   23.723882] sd 9:0:0:0: [sde] Write Protect is off
[   23.723885] sd 9:0:0:0: [sde] Mode Sense: 03 00 00 00
[   23.724880] sd 9:0:0:0: [sde] No Caching mode page found
[   23.724884] sd 9:0:0:0: [sde] Assuming drive cache: write through
[   23.730393]  sde: sde1
[   23.733760] sd 9:0:0:0: [sde] Attached SCSI removable disk
[   24.013468] Adding 16776188k swap on /dev/sda6.  Priority:-1 extents:1 
across:16776188k FS
[   24.352297] fuse init (API version 7.24)
[   25.341040] 
================================================================================
[   25.341048] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1274:11
[   25.341052] shift exponent -1 is negative
[   25.341057] CPU: 0 PID: 3188 Comm: mktemp Not tainted 4.5.1-default-pciehp #1
[   25.341059] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[   25.341061]  ffffffff82baa83e ffff880405867828 ffffffff816d10b5 
ffffffff811c1a4a
[   25.341067]  ffff880405867858 0000000000000001 ffff880405867840 
ffffffff81752d6d
[   25.341072]  ffffffffffffffff ffff8804058678d8 ffffffff8175337b 
ffff880407f51f00
[   25.341077] Call Trace:
[   25.341084]  [<ffffffff816d10b5>] dump_stack+0x68/0xa3
[   25.341089]  [<ffffffff811c1a4a>] ? console_unlock+0x1da/0x640
[   25.341094]  [<ffffffff81752d6d>] ubsan_epilogue+0xd/0x40
[   25.341099]  [<ffffffff8175337b>] 
__ubsan_handle_shift_out_of_bounds+0xeb/0x130
[   25.341105]  [<ffffffff8100312d>] ? trace_raw_output_sys_enter+0xcd/0x120
[   25.341110]  [<ffffffff81495a01>] mb_find_order_for_block+0x101/0x140
[   25.341113]  [<ffffffff814994b2>] mb_mark_used+0x152/0xac0
[   25.341117]  [<ffffffff81499e8f>] ext4_mb_use_best_found+0x6f/0x1c0
[   25.341120]  [<ffffffff8149a5c2>] ext4_mb_check_limits+0xd2/0x170
[   25.341124]  [<ffffffff8149a82f>] ext4_mb_complex_scan_group+0x1cf/0x540
[   25.341128]  [<ffffffff814a3d2a>] ? ext4_mb_regular_allocator+0x21a/0x670
[   25.341131]  [<ffffffff814a3dae>] ext4_mb_regular_allocator+0x29e/0x670
[   25.341135]  [<ffffffff814a78b5>] ext4_mb_new_blocks+0x465/0xc80
[   25.341138]  [<ffffffff8148bd35>] ? ext4_ext_map_blocks+0x195/0x2160
[   25.341141]  [<ffffffff8148ca0c>] ext4_ext_map_blocks+0xe6c/0x2160
[   25.341146]  [<ffffffff81439656>] ext4_map_blocks+0x156/0x530
[   25.341149]  [<ffffffff8143a7d5>] ext4_getblk+0x45/0x230
[   25.341153]  [<ffffffff8143a9cd>] ext4_bread+0xd/0xb0
[   25.341156]  [<ffffffff8144a054>] ext4_append+0x84/0x1d0
[   25.341160]  [<ffffffff81453e2f>] ext4_mkdir+0x24f/0x640
[   25.341166]  [<ffffffff81364213>] vfs_mkdir+0xc3/0x220
[   25.341169]  [<ffffffff8136cd8a>] SyS_mkdir+0x8a/0x150
[   25.341173]  [<ffffffff81003044>] ? lockdep_sys_exit_thunk+0x12/0x14
[   25.341178]  [<ffffffff821eb65b>] entry_SYSCALL_64_fastpath+0x16/0x73
[   25.341181] 
================================================================================
[   25.732260] EXT4-fs (sdd1): recovery complete
[   25.732869] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: 
(null)
[   28.275953]  sdc: sdc1
[   28.278487] sd 8:0:0:0: [sdc] Attached SCSI disk
[   29.306752] EXT4-fs (sdc1): recovery complete
[   29.325124] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: 
(null)
[   29.523204] r8169 0000:05:00.0: Direct firmware load for 
rtl_nic/rtl8168e-2.fw failed with error -2
[   29.523218] r8169 0000:05:00.0 enp5s0: unable to load firmware patch 
rtl_nic/rtl8168e-2.fw (-2)
[   29.549853] r8169 0000:05:00.0 enp5s0: link down
[   29.549948] r8169 0000:05:00.0 enp5s0: link down
[   31.188378] r8169 0000:05:00.0 enp5s0: link up
[   31.747989]  sdb: sdb1
[   31.755896] sd 7:0:0:0: [sdb] Attached SCSI disk
[   33.264657] EXT4-fs (sdb1): recovery complete
[   33.276223] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: 
(null)
[   41.460533] 
================================================================================
[   41.460542] UBSAN: Undefined behaviour in 
./arch/x86/include/asm/atomic.h:156:9
[   41.460546] signed integer overflow:
[   41.460549] -1370479229 + -1766973096 cannot be represented in type 'int'
[   41.460554] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.1-default-pciehp #1
[   41.460557] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[   41.460559]  ffffffff833d76f4 ffff88041fa037b8 ffffffff816d10b5 
0000000000000007
[   41.460566]  ffff88041fa037e0 000000000000002b ffff88041fa037d0 
ffffffff81752d6d
[   41.460572]  ffffffff96ae2158 ffff88041fa03858 ffffffff81753696 
0000000000000292
[   41.460577] Call Trace:
[   41.460579]  <IRQ>  [<ffffffff816d10b5>] dump_stack+0x68/0xa3
[   41.460592]  [<ffffffff81752d6d>] ubsan_epilogue+0xd/0x40
[   41.460597]  [<ffffffff81753696>] handle_overflow+0xb6/0xe0
[   41.460603]  [<ffffffff811a4c22>] ? trace_hardirqs_on_caller+0x102/0x2c0
[   41.460606]  [<ffffffff811a4ded>] ? trace_hardirqs_on+0xd/0x10
[   41.460611]  [<ffffffff817536ce>] __ubsan_handle_add_overflow+0xe/0x10
[   41.460617]  [<ffffffff81ed6d9a>] ip_idents_reserve+0x9a/0xd0
[   41.460622]  [<ffffffff81ed6e78>] __ip_select_ident+0xa8/0x100
[   41.460626]  [<ffffffff81eeef5a>] __ip_make_skb+0x30a/0x910
[   41.460629]  [<ffffffff81eef5fd>] ip_push_pending_frames+0x1d/0x50
[   41.460634]  [<ffffffff81f4454a>] icmp_push_reply+0x16a/0x340
[   41.460638]  [<ffffffff81f45deb>] icmp_send+0x68b/0xad0
[   41.460643]  [<ffffffff81f3b0ac>] ? __udp4_lib_lookup+0x38c/0x840
[   41.460648]  [<ffffffff81f3d3af>] __udp4_lib_rcv+0x8bf/0xde0
[   41.460653]  [<ffffffff81f3e4b5>] udp_rcv+0x15/0x20
[   41.460658]  [<ffffffff81ee2bda>] ip_local_deliver_finish+0xda/0x580
[   41.460662]  [<ffffffff81ee2b4b>] ? ip_local_deliver_finish+0x4b/0x580
[   41.460667]  [<ffffffff81ee3bcf>] ip_local_deliver+0x7f/0x120
[   41.460672]  [<ffffffff81ee31d7>] ip_rcv_finish+0x157/0x7c0
[   41.460676]  [<ffffffff81ee3f10>] ip_rcv+0x2a0/0x490
[   41.460681]  [<ffffffff81ee3c70>] ? ip_local_deliver+0x120/0x120
[   41.460686]  [<ffffffff81e82054>] __netif_receive_skb_core+0x644/0x10a0
[   41.460691]  [<ffffffff81e82acf>] __netif_receive_skb+0x1f/0xe0
[   41.460695]  [<ffffffff81e857c8>] netif_receive_skb_internal+0x68/0x260
[   41.460699]  [<ffffffff81e85773>] ? netif_receive_skb_internal+0x13/0x260
[   41.460703]  [<ffffffff81e87700>] napi_gro_receive+0x180/0x280
[   41.460709]  [<ffffffff81b6d2fe>] rtl8169_poll+0x2ee/0x810
[   41.460713]  [<ffffffff81e8686c>] net_rx_action+0x25c/0x5e0
[   41.460718]  [<ffffffff81130043>] ? __do_softirq+0xf3/0x7a0
[   41.460721]  [<ffffffff8113005b>] __do_softirq+0x10b/0x7a0
[   41.460725]  [<ffffffff811308f0>] irq_exit+0xd0/0x120
[   41.460730]  [<ffffffff8100deff>] do_IRQ+0x7f/0x170
[   41.460737]  [<ffffffff821ec149>] common_interrupt+0x89/0x89
[   41.460738]  <EOI>  [<ffffffff81d6278c>] ? poll_idle+0x5c/0xe0
[   41.460746]  [<ffffffff81d61e6a>] cpuidle_enter_state+0x9a/0x4c0
[   41.460749]  [<ffffffff81d622e2>] cpuidle_enter+0x12/0x20
[   41.460755]  [<ffffffff8119c767>] call_cpuidle+0x47/0xa0
[   41.460758]  [<ffffffff81d622b4>] ? cpuidle_select+0x24/0x40
[   41.460763]  [<ffffffff8119cc30>] cpu_startup_entry+0x2e0/0x4a0
[   41.460767]  [<ffffffff821e0c52>] rest_init+0x152/0x160
[   41.460772]  [<ffffffff836a3476>] start_kernel+0x48f/0x49c
[   41.460777]  [<ffffffff836a2120>] ? early_idt_handler_array+0x120/0x120
[   41.460782]  [<ffffffff836a236f>] x86_64_start_reservations+0x2a/0x2c
[   41.460786]  [<ffffffff836a2511>] x86_64_start_kernel+0x1a0/0x1b1
[   41.460789] 
================================================================================
[   45.324823] pbs_mom (4640): /proc/4640/oom_adj is deprecated, please use 
/proc/4640/oom_score_adj instead.
[   47.598040] smpboot: CPU 2 is now offline
[   47.836719] smpboot: CPU 3 is now offline

Reply via email to