On Tue, Apr 19, 2016 at 12:20:18PM +0530, maitysancha...@gmail.com wrote: > Hello Peter, > > On 16-04-19 10:40:20, Peter Chen wrote: > > On Mon, Apr 18, 2016 at 02:36:06PM +0530, maitysancha...@gmail.com wrote: > > > Hello Peter, > > > > > > I tested this on a Colibri Vybrid VF61 module with the patches applied > > > on top of for-next branch. > > > > > > root@colibri-vf:~# uname -a > > > Linux colibri-vf 4.6.0-rc1-00044-gc76529e-dirty #120 Mon Apr 18 13:46:34 > > > IST 2016 armv7l GNU/Linux > > > > > > Host and client mode work only on boot up. Trying to change the mode by > > > disconnecting/reconnecting > > > the cable or plugging in a USB device does not work. Also when the USB > > > client mode is working on > > > boot up, disconnecting the cable results in the below stack trace. > > > > > > root@colibri-vf:~# ping 192.168.11.234 > > > > > > PING 192.168.11.234 (192.168.11.234): 56 data bytes > > > 64 bytes from 192.168.11.234: seq=0 ttl=64 time=5.399 ms > > > ^C > > > --- 192.168.11.234 ping statistics --- > > > 1 packets transmitted, 1 packets received, 0% packet loss > > > round-trip min/avg/max = 5.399/5.399/5.399 ms > > > --------------------- On Cable disconnection------------------------- > > > root@colibri-vf:~# [ 23.923607] irq 35: nobody cared (try booting with > > > the "irqpoll" option) > > > [ 23.930354] CPU: 0 PID: 0 Comm: swapper Not tainted > > > 4.6.0-rc1-00044-gc76529e-dirty #120 > > > [ 23.938359] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) > > > [ 23.944807] Backtrace: > > > [ 23.947327] [<8010b56c>] (dump_backtrace) from [<8010b764>] > > > (show_stack+0x18/0x1c) > > > [ 23.954900] r7:00000023 r6:00000000 r5:00000000 r4:8f4ad240 > > > [ 23.960644] [<8010b74c>] (show_stack) from [<803a1c00>] > > > (dump_stack+0x24/0x28) > > > [ 23.967893] [<803a1bdc>] (dump_stack) from [<80148150>] > > > (__report_bad_irq+0x30/0xb8) > > > [ 23.975655] [<80148120>] (__report_bad_irq) from [<801484a8>] > > > (note_interrupt+0x260/0x2b0) > > > [ 23.983918] r5:00000000 r4:8f4ad240 > > > [ 23.987538] [<80148248>] (note_interrupt) from [<801460cc>] > > > (handle_irq_event_percpu+0xe0/0x154) > > > [ 23.996328] r10:00000000 r9:80b35683 r8:8f4ad240 r7:00000023 > > > r6:00000000 r5:00000000 > > > [ 24.004242] r4:00000000 r3:00000000 > > > [ 24.007860] [<80145fec>] (handle_irq_event_percpu) from [<80146170>] > > > (handle_irq_event+0x30/0x44) > > > [ 24.016732] r10:80b0210c r9:90003100 r8:8f406000 r7:80b01f10 > > > r6:00000000 r5:80b14ed0 > > > [ 24.024646] r4:8f4ad240 > > > [ 24.027206] [<80146140>] (handle_irq_event) from [<80148d2c>] > > > (handle_fasteoi_irq+0xa8/0x170) > > > [ 24.035737] r5:80b14ed0 r4:8f4ad240 > > > [ 24.039363] [<80148c84>] (handle_fasteoi_irq) from [<801457a0>] > > > (generic_handle_irq+0x2c/0x3c) > > > [ 24.047973] r7:80b01f10 r6:00000000 r5:00000023 r4:80b14d8c > > > [ 24.053706] [<80145774>] (generic_handle_irq) from [<80145a30>] > > > (__handle_domain_irq+0x5c/0xb0) > > > [ 24.062420] [<801459d4>] (__handle_domain_irq) from [<801013d0>] > > > (gic_handle_irq+0x50/0x84) > > > [ 24.070771] r9:90003100 r8:80b01e00 r7:90002100 r6:9000210c > > > r5:80b023b0 r4:80b14ec0 > > > [ 24.078611] [<80101380>] (gic_handle_irq) from [<8010c214>] > > > (__irq_svc+0x54/0x70) > > > [ 24.086101] Exception stack(0x80b01e00 to 0x80b01e48) > > > [ 24.091173] 1e00: 80b360c0 00200000 80b36080 00000000 00000002 > > > 00000010 00000000 00000000 > > > [ 24.099363] 1e20: 8f406000 90003100 80b0210c 80b01eac 00200000 > > > 80b01e50 8011cf18 8011caec > > > [ 24.107545] 1e40: 600c0113 ffffffff > > > [ 24.111039] r9:90003100 r8:8f406000 r7:80b01e34 r6:ffffffff > > > r5:600c0113 r4:8011caec > > > [ 24.118892] [<8011ca4c>] (__do_softirq) from [<8011cf18>] > > > (irq_exit+0xb8/0xf4) > > > [ 24.126114] r10:80b0210c r9:90003100 r8:8f406000 r7:00000000 > > > r6:00000000 r5:00000010 > > > [ 24.134028] r4:80b14d8c > > > [ 24.136587] [<8011ce60>] (irq_exit) from [<80145a34>] > > > (__handle_domain_irq+0x60/0xb0) > > > [ 24.144429] [<801459d4>] (__handle_domain_irq) from [<801013d0>] > > > (gic_handle_irq+0x50/0x84) > > > [ 24.152782] r9:90003100 r8:80b01f10 r7:90002100 r6:9000210c > > > r5:80b023b0 r4:80b14ec0 > > > [ 24.160621] [<80101380>] (gic_handle_irq) from [<8010c214>] > > > (__irq_svc+0x54/0x70) > > > [ 24.168110] Exception stack(0x80b01f10 to 0x80b01f58) > > > [ 24.173175] 1f00: 00000001 > > > 00000000 00000000 80115ac0 > > > [ 24.181365] 1f20: 00000000 80b0210c 00000000 80b29c78 80b02114 > > > 80b00000 80b0210c 80b01f6c > > > [ 24.189554] 1f40: 80b01f70 80b01f60 80108200 80108204 600c0013 ffffffff > > > [ 24.196173] r9:80b00000 r8:80b02114 r7:80b01f44 r6:ffffffff > > > r5:600c0013 r4:80108204 > > > [ 24.204026] [<801081c4>] (arch_cpu_idle) from [<8013dea8>] > > > (default_idle_call+0x28/0x34) > > > [ 24.212134] [<8013de80>] (default_idle_call) from [<8013e018>] > > > (cpu_startup_entry+0x164/0x1c0) > > > [ 24.220776] [<8013deb4>] (cpu_startup_entry) from [<806fa2a4>] > > > (rest_init+0x78/0x7c) > > > [ 24.228518] r7:ffffffff > > > [ 24.231097] [<806fa22c>] (rest_init) from [<80a00ce0>] > > > (start_kernel+0x370/0x37c) > > > [ 24.238599] [<80a00970>] (start_kernel) from [<80008078>] (0x80008078) > > > [ 24.245127] handlers: > > > [ 24.247415] [<804f2dcc>] ci_irq > > > [ 24.250578] Disabling IRQ #35 > > > > > > Below is a diff of the changes to the kernel after applying these two > > > patches > > > > > > diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi > > > b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi > > > index a8a8e43..e85b534 100644 > > > --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi > > > +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi > > > @@ -50,6 +50,14 @@ > > > clock-frequency = <16000000>; > > > }; > > > > > > + extcon_usbc_det: usbc_det { > > > + compatible = "linux,extcon-usb-gpio"; > > > + debounce = <25>; > > > + id-gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_usbc_det>; > > > + }; > > > + > > > panel: panel { > > > compatible = "edt,et057090dhu"; > > > backlight = <&bl>; > > > @@ -162,6 +170,10 @@ > > > status = "okay"; > > > }; > > > > > > +&usbdev0 { > > > + extcon = <&extcon_usbc_det>, <&extcon_usbc_det>; > > > +}; > > > + > > > > Would you please show me your board design for vbus and id control? > > And what's the default value for both signal? > > I have attached a screenshot of the PDF schematic. > > The PDF schematic is here if you would like to access it in it's entirety. > http://developer.toradex.com/products/colibri-evaluation-board#Design_Guides_and_Application_Notes > > We use a GPIO for only the ID pin. The ID pin is connected to a regulator's > ENABLE which then controls the VBUS.
When the ID = 0, the vbus = 5v; When the ID = 1, vbus = 0v. But after checking sch, USB_ID pin controls EN pin directly, but not opposite control, am I missing something? Do you know the connect/disconnect by using USB Cable (not ID cable), I just want to know if the software can know connection, if not, please try below patch on the top of this patch set, my patch set can't cover this case for dual-role switch. diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 6986a50..d9a0119 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1960,6 +1960,9 @@ static int udc_id_switch_for_device(struct ci_hdrc *ci) ci_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, OTGSC_BSVIS | OTGSC_BSVIE); + if (ci->dp_always_pullup) + usb_gadget_vbus_connect(&ci->gadget); + return 0; } Peter > > > > > In your dts, both signals use the same pin. In the most of the designs, > > they are two different pins. > > Below are content from the chipidea binding doc: > > > > - extcon: phandles to external connector devices. First phandle should > > point to > > external connector, which provide "USB" cable events, the second should > > point > > to external connector device, which provide "USB-HOST" cable events. If > > one > > of the external connector devices is not required, empty <0> phandle > > should > > be specified. > > > > My bad. I remembered this document but made the erroneous change. Second > phandle > should have been <0>. With this change I still have the previous observations. > I will take a better look at your patchset. > -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html