ti_command_in_sync and ti_command_out_sync shouldn't use userspace
datatypes (__uX), data should be void* to avoid casting and size
should be size_t.
This patch rewrite those functions with new names: ti_send_ctrl_data_urb
and ti_recv_ctrl_urb. Also add a ti_send_ctrl_urb to simplify command
sending.
Signed-off-by: Mathieu OTHACEHE <m.othac...@gmail.com>
---
drivers/usb/serial/ti_usb_3410_5052.c | 156 +++++++++++++++++++---------------
1 file changed, 88 insertions(+), 68 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c
b/drivers/usb/serial/ti_usb_3410_5052.c
index 91ea1b5..eb4df1e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -313,11 +313,6 @@ static int ti_set_serial_info(struct tty_struct *tty,
struct ti_port *tport,
struct serial_struct __user *new_arg);
static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
-static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
- __u16 moduleid, __u16 value, __u8 *data, int size);
-static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
- __u16 moduleid, __u16 value, __u8 *data, int size);
-
static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
unsigned long addr, u8 mask, u8 byte);
@@ -462,6 +457,71 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
module_usb_serial_driver(serial_drivers, ti_id_table_combined);
+static int ti_send_ctrl_data_urb(struct usb_serial *serial, u8 request,
+ u16 value, u16 index, void *data, size_t size)
+{
+ int status;
+
+ status = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request,
+ (USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+ USB_DIR_OUT), value, index,
+ data, size,
+ USB_CTRL_SET_TIMEOUT);
+ if (status < 0) {
+ dev_err(&serial->interface->dev,
+ "%s - usb_control_msg failed: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ if (status != size) {
+ dev_err(&serial->interface->dev,
+ "%s - short write (%d / %zd)\n",
+ __func__, status, size);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int ti_send_ctrl_urb(struct usb_serial *serial,
+ u8 request, u16 value, u16 index)
+{
+ return ti_send_ctrl_data_urb(serial, request, value, index,
+ NULL, 0);
+}
+
+static int ti_recv_ctrl_data_urb(struct usb_serial *serial, u8 request,
+ u16 value, u16 index, void *data, size_t size)
+{
+ int status;
+
+ status = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ request,
+ (USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+ USB_DIR_IN), value, index,
+ data, size,
+ USB_CTRL_SET_TIMEOUT);
+ if (status < 0) {
+ dev_err(&serial->interface->dev,
+ "%s - usb_control_msg failed: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ if (status != size) {
+ dev_err(&serial->interface->dev,
+ "%s - short read (%d / %zd)\n",
+ __func__, status, size);
+ return -EIO;
+ }
+
+ return 0;
+}
+
static int ti_startup(struct usb_serial *serial)
{
struct ti_device *tdev;
@@ -589,6 +649,7 @@ static int ti_port_remove(struct usb_serial_port *port)
static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ti_port *tport = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
struct ti_device *tdev;
struct usb_device *dev;
struct urb *urb;
@@ -632,31 +693,32 @@ static int ti_open(struct tty_struct *tty, struct
usb_serial_port *port)
if (tty)
ti_set_termios(tty, port, &tty->termios);
- status = ti_command_out_sync(tdev, TI_OPEN_PORT,
- (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
+ status = ti_send_ctrl_urb(serial, TI_OPEN_PORT, open_settings,
+ TI_UART1_PORT + port_number);
if (status) {
dev_err(&port->dev, "%s - cannot send open command, %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_START_PORT,
- (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
+ status = ti_send_ctrl_urb(serial, TI_START_PORT, 0,
+ TI_UART1_PORT + port_number);
if (status) {
dev_err(&port->dev, "%s - cannot send start command, %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_PURGE_PORT,
- (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
+ status = ti_send_ctrl_urb(serial, TI_PURGE_PORT, TI_PURGE_INPUT,
+ TI_UART1_PORT + port_number);
if (status) {
dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_PURGE_PORT,
- (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
+
+ status = ti_send_ctrl_urb(serial, TI_PURGE_PORT, TI_PURGE_OUTPUT,
+ TI_UART1_PORT + port_number);
if (status) {
dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
__func__, status);
@@ -671,16 +733,16 @@ static int ti_open(struct tty_struct *tty, struct
usb_serial_port *port)
if (tty)
ti_set_termios(tty, port, &tty->termios);
- status = ti_command_out_sync(tdev, TI_OPEN_PORT,
- (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
+ status = ti_send_ctrl_urb(serial, TI_OPEN_PORT, open_settings,
+ TI_UART1_PORT + port_number);
if (status) {
dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_START_PORT,
- (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
+ status = ti_send_ctrl_urb(serial, TI_START_PORT, 0,
+ TI_UART1_PORT + port_number);
if (status) {
dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
__func__, status);
@@ -735,8 +797,8 @@ static void ti_close(struct usb_serial_port *port)
port_number = port->port_number;
- status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
- (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
+ status = ti_send_ctrl_urb(port->serial, TI_CLOSE_PORT, 0,
+ TI_UART1_PORT + port_number);
if (status)
dev_err(&port->dev,
"%s - cannot send close port command, %d\n"
@@ -894,9 +956,9 @@ static void ti_set_termios(struct tty_struct *tty,
cpu_to_be16s(&config->wBaudRate);
cpu_to_be16s(&config->wFlags);
- status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
- (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
- sizeof(*config));
+ status = ti_send_ctrl_data_urb(port->serial, TI_SET_CONFIG, 0,
+ TI_UART1_PORT + port_number, config,
+ sizeof(*config));
if (status)
dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
__func__, port_number, status);
@@ -1090,7 +1152,6 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int
mcr)
static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
{
int size, status;
- struct ti_device *tdev = tport->tp_tdev;
struct usb_serial_port *port = tport->tp_port;
int port_number = port->port_number;
struct ti_port_status *data;
@@ -1100,8 +1161,8 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
if (!data)
return -ENOMEM;
- status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
- (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
+ status = ti_recv_ctrl_data_urb(port->serial, TI_GET_PORT_STATUS, 0,
+ TI_UART1_PORT + port_number, data, size);
if (status) {
dev_err(&port->dev,
"%s - get port status command failed, %d\n",
@@ -1208,46 +1269,6 @@ static void ti_handle_new_msr(struct ti_port *tport, u8
msr)
tty_kref_put(tty);
}
-static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
- __u16 moduleid, __u16 value, __u8 *data, int size)
-{
- int status;
-
- status = usb_control_msg(tdev->td_serial->dev,
- usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
- (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
- value, moduleid, data, size, 1000);
-
- if (status == size)
- status = 0;
-
- if (status > 0)
- status = -ECOMM;
-
- return status;
-}
-
-
-static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
- __u16 moduleid, __u16 value, __u8 *data, int size)
-{
- int status;
-
- status = usb_control_msg(tdev->td_serial->dev,
- usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
- (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
- value, moduleid, data, size, 1000);
-
- if (status == size)
- status = 0;
-
- if (status > 0)
- status = -ECOMM;
-
- return status;
-}
-
-
static int ti_write_byte(struct usb_serial_port *port,
struct ti_device *tdev, unsigned long addr,
u8 mask, u8 byte)
@@ -1272,9 +1293,8 @@ static int ti_write_byte(struct usb_serial_port *port,
data->bData[0] = mask;
data->bData[1] = byte;
- status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
- (__u8 *)data, size);
-
+ status = ti_send_ctrl_data_urb(port->serial, TI_WRITE_DATA, 0,
+ TI_RAM_PORT, data, size);
if (status < 0)
dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
--
2.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
