__uX types should only be used for user-space interactions.
Signed-off-by: Mathieu OTHACEHE <m.othac...@gmail.com>
---
drivers/usb/serial/ti_usb_3410_5052.c | 66 ++++++++++++++++++-----------------
1 file changed, 34 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c
b/drivers/usb/serial/ti_usb_3410_5052.c
index af4e145..164e07b 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -179,23 +179,23 @@
/* Config struct */
struct ti_uart_config {
- __u16 wBaudRate;
- __u16 wFlags;
- __u8 bDataBits;
- __u8 bParity;
- __u8 bStopBits;
+ __be16 wBaudRate;
+ __be16 wFlags;
+ u8 bDataBits;
+ u8 bParity;
+ u8 bStopBits;
char cXon;
char cXoff;
- __u8 bUartMode;
+ u8 bUartMode;
} __packed;
/* Get port status */
struct ti_port_status {
- __u8 bCmdCode;
- __u8 bModuleId;
- __u8 bErrorCode;
- __u8 bMSR;
- __u8 bLSR;
+ u8 bCmdCode;
+ u8 bModuleId;
+ u8 bErrorCode;
+ u8 bMSR;
+ u8 bLSR;
} __packed;
/* Purge modes */
@@ -218,12 +218,12 @@ struct ti_port_status {
#define TI_RW_DATA_DOUBLE_WORD 0x04
struct ti_write_data_bytes {
- __u8 bAddrType;
- __u8 bDataType;
- __u8 bDataCounter;
+ u8 bAddrType;
+ u8 bDataType;
+ u8 bDataCounter;
__be16 wBaseAddrHi;
__be16 wBaseAddrLo;
- __u8 bData[0];
+ u8 bData[0];
} __packed;
/* Interrupt codes */
@@ -247,7 +247,7 @@ static inline int ti_get_func_from_code(unsigned char code)
/* Firmware image header */
struct ti_firmware_header {
__le16 wLength;
- __u8 bCheckSum;
+ u8 bCheckSum;
} __packed;
/* UART addresses */
@@ -277,9 +277,9 @@ struct ti_firmware_header {
struct ti_port {
int tp_is_open;
- __u8 tp_msr;
- __u8 tp_shadow_mcr;
- __u8 tp_uart_mode; /* 232 or 485 modes */
+ u8 tp_msr;
+ u8 tp_shadow_mcr;
+ u8 tp_uart_mode; /* 232 or 485 modes */
unsigned int tp_uart_base_addr;
int tp_flags;
struct ti_device *tp_tdev;
@@ -332,7 +332,7 @@ static int ti_get_serial_info(struct ti_port *tport,
struct serial_struct __user *ret_arg);
static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg);
-static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
+static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
@@ -343,7 +343,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8
command,
__u16 moduleid, __u16 value, __u8 *data, int size);
static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
- unsigned long addr, __u8 mask, __u8 byte);
+ unsigned long addr, u8 mask, u8 byte);
static int ti_download_firmware(struct ti_device *tdev);
@@ -636,9 +636,11 @@ static int ti_open(struct tty_struct *tty, struct
usb_serial_port *port)
struct urb *urb;
int port_number;
int status;
- __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINUOUS |
- TI_PIPE_TIMEOUT_ENABLE |
- (TI_TRANSFER_TIMEOUT << 2));
+ u16 open_settings;
+
+ open_settings = (TI_PIPE_MODE_CONTINUOUS |
+ TI_PIPE_TIMEOUT_ENABLE |
+ (TI_TRANSFER_TIMEOUT << 2));
if (tport == NULL)
return -ENODEV;
@@ -968,7 +970,7 @@ static void ti_set_termios(struct tty_struct *tty,
/* these flags must be set */
config->wFlags |= TI_UART_ENABLE_MS_INTS;
config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA;
- config->bUartMode = (__u8)(tport->tp_uart_mode);
+ config->bUartMode = tport->tp_uart_mode;
switch (cflag & CSIZE) {
case CS5:
@@ -1169,7 +1171,7 @@ static void ti_interrupt_callback(struct urb *urb)
int function;
int status = urb->status;
int retval;
- __u8 msr;
+ u8 msr;
switch (status) {
case 0:
@@ -1502,7 +1504,7 @@ static int ti_set_serial_info(struct tty_struct *tty,
struct ti_port *tport,
}
-static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
+static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
{
struct async_icount *icount;
struct tty_struct *tty;
@@ -1614,8 +1616,8 @@ static int ti_command_in_sync(struct ti_device *tdev,
__u8 command,
static int ti_write_byte(struct usb_serial_port *port,
- struct ti_device *tdev, unsigned long addr,
- __u8 mask, __u8 byte)
+ struct ti_device *tdev, unsigned long addr,
+ u8 mask, u8 byte)
{
int status;
unsigned int size;
@@ -1659,10 +1661,10 @@ static int ti_do_download(struct usb_device *dev, int
pipe,
int len;
for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
- cs = (__u8)(cs + buffer[pos]);
+ cs = (u8)(cs + buffer[pos]);
header = (struct ti_firmware_header *)buffer;
- header->wLength = cpu_to_le16((__u16)(size
+ header->wLength = cpu_to_le16((u16)(size
- sizeof(struct ti_firmware_header)));
header->bCheckSum = cs;
@@ -1681,7 +1683,7 @@ static int ti_download_firmware(struct ti_device *tdev)
{
int status;
int buffer_size;
- __u8 *buffer;
+ u8 *buffer;
struct usb_device *dev = tdev->td_serial->dev;
unsigned int pipe = usb_sndbulkpipe(dev,
tdev->td_serial->port[0]->bulk_out_endpointAddress);
--
2.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
