* Bin Liu <[email protected]> [160513 15:04]:
>
> But what would be in musb_default_set_mode()? Currently only am35x,
> da8xx, dsps, and omap2430 glues implement _set_mode(), but they don't
> have any in common. Only omap2430 sets session bit in _set_mode(), no
> one else does so.
Well how about the following if no glue specific configuration of the
ID pin is possible?
Tony
8< -----------------------
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -416,6 +416,26 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len,
const u8 *src)
return hw_ep->musb->io.write_fifo(hw_ep, len, src);
}
+static int musb_try_set_mode(struct musb *musb, u8 mode)
+{
+ if (musb->ops->set_mode)
+ return musb->ops->set_mode(musb, mode);
+
+ if (mode == MUSB_HOST) {
+ u8 devctl;
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ devctl |= MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+ } else {
+ dev_warn(musb->controller,
+ "platform specific set_mode not implemnted: %i\n",
+ mode);
+ }
+
+ return 0;
+}
+
/*-------------------------------------------------------------------------*/
/* for high speed test mode; see USB 2.0 spec 7.1.20 */
@@ -1723,11 +1743,11 @@ musb_mode_store(struct device *dev, struct
device_attribute *attr,
spin_lock_irqsave(&musb->lock, flags);
if (sysfs_streq(buf, "host"))
- status = musb_platform_set_mode(musb, MUSB_HOST);
+ status = musb_try_set_mode(musb, MUSB_HOST);
else if (sysfs_streq(buf, "peripheral"))
- status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+ status = musb_try_set_mode(musb, MUSB_PERIPHERAL);
else if (sysfs_streq(buf, "otg"))
- status = musb_platform_set_mode(musb, MUSB_OTG);
+ status = musb_try_set_mode(musb, MUSB_OTG);
else
status = -EINVAL;
spin_unlock_irqrestore(&musb->lock, flags);
@@ -2185,13 +2205,13 @@ musb_init_controller(struct device *dev, int nIrq, void
__iomem *ctrl)
status = musb_host_setup(musb, plat->power);
if (status < 0)
goto fail3;
- status = musb_platform_set_mode(musb, MUSB_HOST);
+ status = musb_try_set_mode(musb, MUSB_HOST);
break;
case MUSB_PORT_MODE_GADGET:
status = musb_gadget_setup(musb);
if (status < 0)
goto fail3;
- status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+ status = musb_try_set_mode(musb, MUSB_PERIPHERAL);
break;
case MUSB_PORT_MODE_DUAL_ROLE:
status = musb_host_setup(musb, plat->power);
@@ -2202,7 +2222,7 @@ musb_init_controller(struct device *dev, int nIrq, void
__iomem *ctrl)
musb_host_cleanup(musb);
goto fail3;
}
- status = musb_platform_set_mode(musb, MUSB_OTG);
+ status = musb_try_set_mode(musb, MUSB_OTG);
break;
default:
dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -556,14 +556,6 @@ static inline void musb_platform_disable(struct musb *musb)
musb->ops->disable(musb);
}
-static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
-{
- if (!musb->ops->set_mode)
- return 0;
-
- return musb->ops->set_mode(musb, mode);
-}
-
static inline void musb_platform_try_idle(struct musb *musb,
unsigned long timeout)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
