On Mon, May 16, 2016 at 12:51:53PM +0300, Roger Quadros wrote:
> On 16/05/16 12:23, Peter Chen wrote:
> > On Mon, May 16, 2016 at 11:26:57AM +0300, Roger Quadros wrote:
> >> Hi,
> >>
> >> On 16/05/16 10:02, Peter Chen wrote:
> >>> On Fri, May 13, 2016 at 01:03:27PM +0300, Roger Quadros wrote:
> >>>> +
> >>>> +static int usb_gadget_connect_control(struct usb_gadget *gadget, bool
> >>>> connect)
> >>>> +{
> >>>> + struct usb_udc *udc;
> >>>> +
> >>>> + mutex_lock(&udc_lock);
> >>>> + udc = usb_gadget_to_udc(gadget);
> >>>> + if (!udc) {
> >>>> + dev_err(gadget->dev.parent, "%s: gadget not
> >>>> registered.\n",
> >>>> + __func__);
> >>>> + mutex_unlock(&udc_lock);
> >>>> + return -EINVAL;
> >>>> + }
> >>>> +
> >>>> + if (connect) {
> >>>> + if (!gadget->connected)
> >>>> + usb_gadget_connect(udc->gadget);
> >>>> + } else {
> >>>> + if (gadget->connected) {
> >>>> + usb_gadget_disconnect(udc->gadget);
> >>>> + udc->driver->disconnect(udc->gadget);
> >>>> + }
> >>>> + }
> >>>> +
> >>>> + mutex_unlock(&udc_lock);
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>
> >>> Since this is called for vbus interrupt, why not using
> >>> usb_udc_vbus_handler directly, and call udc->driver->disconnect
> >>> at usb_gadget_stop.
> >>
> >> We can't assume that this is always called for vbus interrupt so
> >> I decided not to call usb_udc_vbus_handler.
> >>
> >> udc->vbus is really pointless for us. We keep vbus states in our
> >> state machine and leave udc->vbus as ture always.
> >>
> >> Why do you want to move udc->driver->disconnect() to stop?
> >> If USB controller disconnected from bus then the gadget driver
> >> must be notified about the disconnect immediately. The controller
> >> may or may not be stopped by the core.
> >>
> >
> > Then, would you give some comments when this API will be used?
> > I was assumed it is only used for drd state machine.
>
> drd_state machine didn't even need this API in the first place :).
> You guys wanted me to separate out start/stop and connect/disconnect for full
> OTG case.
> Won't full OTG state machine want to use this API? If not what would it use?
>
Oh, I meant only drd and fully otg state machine needs it. I am
wondering if we need have a new API to do it. Two questions:
- Except for vbus interrupt, any chances this API will be used at
current logic?
- When this API is called but without a coming gadget->stop?
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
