The TI SM-USB-DIG is a USB to SPI/I2C/1Wire/GPIO adapter.
Add MFD core support.

Signed-off-by: Andrew F. Davis <a...@ti.com>
---
Changes from v2:
 - Add missing dependency on USB, thanks kbuild test robot

 drivers/mfd/Kconfig             |   9 +++
 drivers/mfd/Makefile            |   2 +
 drivers/mfd/ti-smusbdig.c       | 138 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/ti-smusbdig.h |  75 ++++++++++++++++++++++
 4 files changed, 224 insertions(+)
 create mode 100644 drivers/mfd/ti-smusbdig.c
 create mode 100644 include/linux/mfd/ti-smusbdig.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1bcf601..af50230 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1373,6 +1373,15 @@ config MFD_LM3533
          additional drivers must be enabled in order to use the LED,
          backlight or ambient-light-sensor functionality of the device.
 
+config MFD_TI_SMUSBDIG
+       tristate "Texas Instruments SM-USB-DIG interface adapter"
+       depends on USB
+       select MFD_CORE
+       help
+         Support for the TI SM-USB-DIG USB to SPI/I2C/1Wire/GPIO adapter.
+         Additional drivers such as SPI_TI_SMUSBDIG, I2C_TI_SMUSBDIG, etc. must
+         be enabled in order to use the functionality of the device.
+
 config MFD_TIMBERDALE
        tristate "Timberdale FPGA"
        select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 42a66e1..4533b95 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -68,6 +68,8 @@ obj-$(CONFIG_MFD_WM8350_I2C)  += wm8350-i2c.o
 wm8994-objs                    := wm8994-core.o wm8994-irq.o wm8994-regmap.o
 obj-$(CONFIG_MFD_WM8994)       += wm8994.o
 
+obj-$(CONFIG_MFD_TI_SMUSBDIG)  += ti-smusbdig.o
+
 obj-$(CONFIG_TPS6105X)         += tps6105x.o
 obj-$(CONFIG_TPS65010)         += tps65010.o
 obj-$(CONFIG_TPS6507X)         += tps6507x.o
diff --git a/drivers/mfd/ti-smusbdig.c b/drivers/mfd/ti-smusbdig.c
new file mode 100644
index 0000000..19f48c6
--- /dev/null
+++ b/drivers/mfd/ti-smusbdig.c
@@ -0,0 +1,138 @@
+/*
+ * MFD Core driver for TI SM-USB-DIG
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *     Andrew F. Davis <a...@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/ti-smusbdig.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#define TI_USB_VENDOR_ID                0x0451
+#define TI_USB_DEVICE_ID_SM_USB_DIG     0x2f90
+
+#define TI_SMUSBDIG_USB_TIMEOUT_MS      1000
+
+struct ti_smusbdig_device {
+       struct usb_device *usb_dev;
+       struct usb_interface *interface;
+};
+
+int ti_smusbdig_xfer(struct ti_smusbdig_device *ti_smusbdig,
+                    u8 *buffer, int size)
+{
+       struct device *dev = &ti_smusbdig->interface->dev;
+       int actual_length, ret;
+
+       if (!ti_smusbdig || !buffer || size <= 0)
+               return -EINVAL;
+
+       ret = usb_interrupt_msg(ti_smusbdig->usb_dev,
+                               usb_sndctrlpipe(ti_smusbdig->usb_dev, 1),
+                               buffer, size, &actual_length,
+                               TI_SMUSBDIG_USB_TIMEOUT_MS);
+       if (ret) {
+               dev_err(dev, "USB transaction failed\n");
+               return ret;
+       }
+
+       ret = usb_interrupt_msg(ti_smusbdig->usb_dev,
+                               usb_rcvctrlpipe(ti_smusbdig->usb_dev, 1),
+                               buffer, TI_SMUSBDIG_PACKET_SIZE, &actual_length,
+                               TI_SMUSBDIG_USB_TIMEOUT_MS);
+       if (ret) {
+               dev_err(dev, "USB transaction failed\n");
+               return ret;
+       }
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(ti_smusbdig_xfer);
+
+static const struct mfd_cell ti_smusbdig_mfd_cells[] = {
+       { .name = "ti-sm-usb-dig-gpio", },
+       { .name = "ti-sm-usb-dig-i2c", },
+       { .name = "ti-sm-usb-dig-spi", },
+       { .name = "ti-sm-usb-dig-w1", },
+};
+
+static int ti_smusbdig_probe(struct usb_interface *interface,
+                            const struct usb_device_id *usb_id)
+{
+       struct usb_host_interface *hostif = interface->cur_altsetting;
+       struct device *dev = &interface->dev;
+       struct ti_smusbdig_device *ti_smusbdig;
+       u8 buffer[TI_SMUSBDIG_PACKET_SIZE];
+       int ret;
+
+       if (hostif->desc.bInterfaceNumber != 0 ||
+           hostif->desc.bNumEndpoints < 2)
+               return -ENODEV;
+
+       ti_smusbdig = devm_kzalloc(dev, sizeof(*ti_smusbdig), GFP_KERNEL);
+       if (!ti_smusbdig)
+               return -ENOMEM;
+
+       ti_smusbdig->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+       ti_smusbdig->interface = interface;
+       usb_set_intfdata(interface, ti_smusbdig);
+
+       buffer[0] = TI_SMUSBDIG_VERSION;
+       ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 1);
+       if (ret)
+               return ret;
+
+       dev_info(dev, "TI SM-USB-DIG Version: %d.%02d Found\n",
+                buffer[0], buffer[1]);
+
+       /* Turn on power supply output */
+       buffer[0] = TI_SMUSBDIG_COMMAND;
+       buffer[1] = TI_SMUSBDIG_COMMAND_DUTPOWERON;
+       ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 2);
+       if (ret)
+               return ret;
+
+       dev_set_drvdata(dev, ti_smusbdig);
+       ret = mfd_add_hotplug_devices(dev, ti_smusbdig_mfd_cells,
+                                     ARRAY_SIZE(ti_smusbdig_mfd_cells));
+       if (ret) {
+               dev_err(dev, "unable to add MFD devices\n");
+               return ret;
+       }
+
+       return 0;
+}
+
+static void ti_smusbdig_disconnect(struct usb_interface *interface)
+{
+       mfd_remove_devices(&interface->dev);
+}
+
+static const struct usb_device_id ti_smusbdig_id_table[] = {
+       { USB_DEVICE(TI_USB_VENDOR_ID, TI_USB_DEVICE_ID_SM_USB_DIG) },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(usb, ti_smusbdig_id_table);
+
+static struct usb_driver ti_smusbdig_driver = {
+       .name = "ti-sm-usb-dig",
+       .probe = ti_smusbdig_probe,
+       .disconnect = ti_smusbdig_disconnect,
+       .id_table = ti_smusbdig_id_table,
+};
+module_usb_driver(ti_smusbdig_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <a...@ti.com>");
+MODULE_DESCRIPTION("Core driver for TI SM-USB-DIG interface adapter");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/ti-smusbdig.h b/include/linux/mfd/ti-smusbdig.h
new file mode 100644
index 0000000..46fd2da
--- /dev/null
+++ b/include/linux/mfd/ti-smusbdig.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *     Andrew F. Davis <a...@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#ifndef __LINUX_MFD_TI_SMUSBDIG_H
+#define __LINUX_MFD_TI_SMUSBDIG_H
+
+#define TI_SMUSBDIG_PACKET_SIZE    32
+/* (packet size - packet header */
+#define TI_SMUSBDIG_DATA_SIZE (TI_SMUSBDIG_PACKET_SIZE - 7)
+
+enum ti_smusbdig_function {
+       TI_SMUSBDIG_SPI            = 0x01,
+       TI_SMUSBDIG_I2C            = 0x02,
+       TI_SMUSBDIG_1W             = 0x03,
+       TI_SMUSBDIG_COMMAND        = 0x04,
+       TI_SMUSBDIG_VERSION        = 0x07,
+};
+
+enum ti_smusbdig_sub_command {
+       TI_SMUSBDIG_COMMAND_DUTPOWERON  = 0x01,
+       TI_SMUSBDIG_COMMAND_DUTPOWEROFF = 0x02,
+};
+
+struct ti_smusbdig_packet {
+       u8 function;
+       u8 channel;
+       u8 edge_polarity;
+       u8 num_commands;
+       u8 is_command_mask[3];
+       u8 data[TI_SMUSBDIG_DATA_SIZE];
+} __packed;
+
+static inline void
+ti_smusbdig_packet_add_command(struct ti_smusbdig_packet *packet, int command)
+{
+       int num_commands = packet->num_commands;
+       int mask_number = num_commands / 8;
+       int mask_bit = num_commands % 8;
+
+       if (num_commands >= TI_SMUSBDIG_DATA_SIZE)
+               return;
+
+       packet->is_command_mask[mask_number] |= BIT(7 - mask_bit);
+       packet->data[num_commands] = command;
+       packet->num_commands++;
+}
+
+static inline void
+ti_smusbdig_packet_add_data(struct ti_smusbdig_packet *packet, u8 data)
+{
+       int num_commands = packet->num_commands;
+
+       if (num_commands >= TI_SMUSBDIG_DATA_SIZE)
+               return;
+
+       packet->data[num_commands] = data;
+       packet->num_commands++;
+}
+
+struct ti_smusbdig_device;
+int ti_smusbdig_xfer(struct ti_smusbdig_device *ti_smusbdig,
+                    u8 *buffer, int size);
+
+#endif /* __LINUX_MFD_TI_SMUSBDIG_H */
-- 
2.8.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to