> -----Original Message----- > From: David Miller [mailto:da...@davemloft.net] > Sent: Tuesday, June 14, 2016 1:35 PM > To: pali.ro...@gmail.com > Cc: gre...@linuxfoundation.org; and...@lunn.ch; Limonciello, Mario > <mario_limoncie...@dell.com>; hayesw...@realtek.com; linux- > ker...@vger.kernel.org; net...@vger.kernel.org; linux- > u...@vger.kernel.org; anthony.w...@canonical.com > Subject: Re: [PATCH v6] r8152: Add support for setting pass through MAC > address on RTL8153-AD > > From: Pali Rohár <pali.ro...@gmail.com> > Date: Tue, 14 Jun 2016 18:47:36 +0200 > > > You have never seen two ethernet cards with same MAC addresses? Right > I > > have not seen two USB, but there is non zero chance that could happen. > > It would be an error scenerio, and something to be avoided. > > It is a valid and correct assumption that one is able to put > several devices at the same time on the same physical network > and expect it to work. > > The behavior added by the change in question invalidates that. > > I'm trying to consider the long term aspects of this, which is that if > more devices adopt this scheme we're in trouble if we blindly > interpret the MAC address in this way. >
Do you mean if other manufacturers start to ship devices with RTL8135-AD's w/ this pass through bit set and people start to try to mix and match? > This firmware MAC property facility seems to be designed with only an > extremely narrow use case being considered. Yes, as I understand it this is the reason that it's only on such specific devices that the mac address pass through bit is actually set on the efuse. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
