On Thu, Jun 16, 2016 at 12:16 PM, Bjørn Mork <bj...@mork.no> wrote: > Sedat Dilek <sedat.di...@gmail.com> writes: >> On Wed, Jun 15, 2016 at 5:51 PM, Alan Stern <st...@rowland.harvard.edu> >> wrote: >> >>> sudo ./usbreset /dev/bus/usb/001/005 >>> >>> 001 and 005 are the Bus and Device numbers from the lsusb output. >>> >> >> Thanks, Alan. >> >> I will look and test this (or adapt your) line as soon as I get in >> front of my machine. >> >> I have seen that the corresponding "usb-port" provides a usb3-hub and >> a usb2-hub, so I think I have to reset both? >> Are those hubs independent? >> I will re-check my outputs which I had sent here. >> >> Can you add an example-line to the "help-text" when invoking usbreset >> with no (or wrong) device-filename argument? > > I noticed a while ago that the OpenWrt guys have made a few useful > changes to this utility, including the ability to name the device by > VID:PID. This makes it a lot easier to use: > http://git.openwrt.org/?p=openwrt.git;a=blob;f=package/utils/usbreset/src/usbreset.c > > I've been planning to get that diff submitted to usbutils, but haven't > gotten around to it yet. Yes, I move slowly ;) >
Go Bjørn, go! - sed@ - -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
