On Sun, Jun 26, 2016 at 12:28:27AM -0700, Stephen Boyd wrote:
> The core framework already handles setting this parameter with a
> platform quirk. Add the appropriate flag so that we always set
> AHBBURST to 0. Technically DT should be doing this, but we always
> do it for msm chipidea devices so setting the flag in the driver
> works just as well.
You still need to set AHB burst value at dts, this flag is just for
override, see below:
ahb-burst-config = <0x0>;
>
> Cc: Peter Chen <peter.c...@nxp.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Signed-off-by: Stephen Boyd <stephen.b...@linaro.org>
> ---
> drivers/usb/chipidea/ci_hdrc_msm.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c
> b/drivers/usb/chipidea/ci_hdrc_msm.c
> index 3889809fd0c4..37591a4b1346 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -24,7 +24,6 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci,
> unsigned event)
> switch (event) {
> case CI_HDRC_CONTROLLER_RESET_EVENT:
> dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
> - writel(0, USB_AHBBURST);
> /* use AHB transactor, allow posted data writes */
> writel(0x8, USB_AHBMODE);
> usb_phy_init(ci->usb_phy);
> @@ -47,7 +46,8 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
> .name = "ci_hdrc_msm",
> .capoffset = DEF_CAPOFFSET,
> .flags = CI_HDRC_REGS_SHARED |
> - CI_HDRC_DISABLE_STREAMING,
> + CI_HDRC_DISABLE_STREAMING |
> + CI_HDRC_OVERRIDE_AHB_BURST,
>
> .notify_event = ci_hdrc_msm_notify_event,
> };
> --
> 2.9.0.rc2.8.ga28705d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
