On Thu, Jul 07, 2016 at 03:21:00PM -0700, Stephen Boyd wrote:
> Force the OTG state machine to go forward when we're using an
> extcon for vbus detection. In this case, the controller may never
> raise an interrupt for AVVIS, so we need to simulate the event by
> toggling the appropriate OTG fsm bits and kicking the state
> machine again.
>
> Cc: Peter Chen <peter.c...@nxp.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Signed-off-by: Stephen Boyd <stephen.b...@linaro.org>
> ---
>
> I think this was rejected last time around but I've kept it in the
> series to continue discussion on how we're supposed to be emulating
> vbus an id pin interrupts and the otgsc register.
>
> drivers/usb/chipidea/otg_fsm.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
> index de8e22ec3902..aab076fc4d82 100644
> --- a/drivers/usb/chipidea/otg_fsm.c
> +++ b/drivers/usb/chipidea/otg_fsm.c
> @@ -475,6 +475,14 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
> return;
> }
> }
> + /*
> + * Force state machine forward if we use extcon
> + * to detect vbus state (i.e. simulate AVVIS event)
> + */
> + if (!IS_ERR(ci->platdata->vbus_extcon.edev)) {
> + fsm->a_vbus_vld = 1;
> + ci_otg_queue_work(ci);
> + }
> /* Disable data pulse irq */
> hw_write_otgsc(ci, OTGSC_DPIE, 0);
>
> @@ -486,6 +494,15 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
>
> fsm->a_bus_drop = 1;
> fsm->a_bus_req = 0;
> + /*
> + * Force state machine forward if we use extcon
> + * to detect vbus state (i.e. simulate AVVIS event)
> + */
> + if (!IS_ERR(ci->platdata->vbus_extcon.edev)) {
> + fsm->a_vbus_vld = 0;
> + fsm->b_conn = 0;
> + ci_otg_queue_work(ci);
> + }
> }
> }
>
Well, if we don't have a_valid, we can't know a_vbus_err state at
A device side if vbus is error (eg, less than 4.4v), and B device
will NOT be disconnect if vbus is still larger than BSV.
Do you really need OTG FSM? If you can pass the OTG test described at
Documentation/usb/chipidea.txt, I can accept it, I find the OTG
compliance test does not test ~a_vbus_vld either, see
otgeh_compliance_plan_1_2, ch6.7.12.2 Paths not tested.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
