When using SG lists, we would end up setting
request->actual to:

        num_mapped_sgs * (request->length - count)

Let's fix that up by incrementing request->actual
only once.

Cc: <[email protected]>
Reported-by: Brian E Rogers <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
---
 drivers/usb/dwc3/gadget.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8f8c2157910e..863c306ebb69 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2013,14 +2013,6 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, 
struct dwc3_ep *dep,
                        s_pkt = 1;
        }
 
-       /*
-        * We assume here we will always receive the entire data block
-        * which we should receive. Meaning, if we program RX to
-        * receive 4K but we receive only 2K, we assume that's all we
-        * should receive and we simply bounce the request back to the
-        * gadget driver for further processing.
-        */
-       req->request.actual += req->request.length - count;
        if (s_pkt)
                return 1;
        if ((event->status & DEPEVT_STATUS_LST) &&
@@ -2040,6 +2032,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, 
struct dwc3_ep *dep,
        struct dwc3_trb         *trb;
        unsigned int            slot;
        unsigned int            i;
+       int                     count = 0;
        int                     ret;
 
        do {
@@ -2054,6 +2047,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, 
struct dwc3_ep *dep,
                                slot++;
                        slot %= DWC3_TRB_NUM;
                        trb = &dep->trb_pool[slot];
+                       count += trb->size & DWC3_TRB_SIZE_MASK;
+
 
                        ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
                                        event, status);
@@ -2061,6 +2056,14 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, 
struct dwc3_ep *dep,
                                break;
                } while (++i < req->request.num_mapped_sgs);
 
+               /*
+                * We assume here we will always receive the entire data block
+                * which we should receive. Meaning, if we program RX to
+                * receive 4K but we receive only 2K, we assume that's all we
+                * should receive and we simply bounce the request back to the
+                * gadget driver for further processing.
+                */
+               req->request.actual += req->request.length - count;
                dwc3_gadget_giveback(dep, req, status);
 
                if (ret)
-- 
2.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to