-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 On Tue, 2016-08-23 at 15:14 -0400, Alan Stern wrote: > Okay, good. The "Driver=rtsx_usb" is what I wanted to see. Something > funny is going on with that driver -- it claims to support autosuspend > but it doesn't ever call usb_mark_last_busy() or > usb_autopm_get_interface(). > > In the meantime, can you post the output from "lsmod"? > > Also, I'd like to see the output from the following (do this before > the device disappears): > > cd /sys/bus/pci/devices/0000:00:14.0/usb?/usb?-4/ > ls -lR >
Please find the asked output at the following links: https://people.debian.org/~rrs/tmp/usb-ls-lR.txt https://people.debian.org/~rrs/tmp/lsmod-usb.txt > Finally, you can try applying this patch. It should prevent the > constant runtime suspend & resume cycling, but it is not the proper > solution to your problem. And it may not prevent the occasional > spontaneous disconnect. > I am building the kernel right now. I'll post back results after trying out the new kernel. I have a question though. For power saving, I use Laptop Mode Tools. Based on power state (AC or BATT), it enables/disables power saving knobs. https://github.com/rickysarraf/laptop-mode-tools Since I suspected the same problem (incapable of LPM) I have had this device blacklisted in Laptop Mode Tools. Here are the attributes for this particular device, while on battery. rrs@learner:/sys/bus/usb/devices/1-4$ cat power/autosuspend 0 2016-08-24 / 14:47:07 ♒♒♒ ☺ rrs@learner:/sys/bus/usb/devices/1-4$ cat power/control on 2016-08-24 / 14:47:34 ♒♒♒ ☺ rrs@learner:/sys/bus/usb/devices/1-4$ cat power/level on 2016-08-24 / 14:47:38 ♒♒♒ ☺ While I write this, the bug hasn't triggered again. I think what may have happened is this: * OS Boots * Goes on battery * LMT sets OS to power saving mode, but blacklists device 1-4 * Eventually, the device resets (device/driver bug?) * Upon reset, driver re-initializes the power saving values to default (?). At this time LMT will not re-apply any settings, because it only gets invoked when a power_supply state change is sensed, i.e. ON_BATT or ON_AC. I think your patch will clarify this once I've booted into it. Thank you very much. Ritesh > Alan Stern > > > > Index: usb-4.x/drivers/mfd/rtsx_usb.c > =================================================================== > --- usb-4.x.orig/drivers/mfd/rtsx_usb.c > +++ usb-4.x/drivers/mfd/rtsx_usb.c > @@ -780,7 +780,6 @@ static struct usb_driver rtsx_usb_driver > .pre_reset = rtsx_usb_pre_reset, > .post_reset = rtsx_usb_post_reset, > .id_table = rtsx_usb_usb_ids, > - .supports_autosuspend = 1, > .soft_unbind = 1, > }; > - -- Ritesh Raj Sarraf RESEARCHUT - http://www.researchut.com "Necessity is the mother of invention." -----BEGIN PGP SIGNATURE----- iQIcBAEBCgAGBQJXvWmNAAoJEKY6WKPy4XVpQacP/Rcdtp010vEsOMibrn0RJbJM J7uJ/dIUgYSJXTW138BcsRmkZ+D4+OVjaPYeIDNLd9+X1gw4GDozERoVPj9BzwJ5 rCNgIY8VhtrXOScrbqzJ3rJwngqCH5rYqZgAHhSxzZJGocWlHuMvhV893toRxMd0 A97PNZAWQv9GAyquIyQDqoKm1Tu6XdB2sP+jUtbh5l6GBA/G15InxqPtj/bYHq0a PQ8me9WFxDvFnF6wF/pCDCJbCYkv+Z4HOYvj0sD3+/HaAL1RolZG4UbO0DYEYY4j g9eqbtcTvs0OaFD/sUZj3rT6m488byenstnDqLHtkB+8hjYdTs/Cbt7HB5/AMjd+ Fo8i/4Tru1DpkNas6iQa9RsfH/0y0c4se98RCoPmuhxyYefdFHpRspgqw61lpdmo hnac2fa1PfvT96Pywr6gv4haFBZc3vZQS1Xs8RceXB7ZBVeaLNEWNcL1IuqHP6yn 7F2J7bUYVOinmbVzEnc1VnbaMsQlXy7cWvVrAYRgf8hkQBgs6VkBjG4YEVo82jeR T4qk34SFpqpSWO/3OAlu2GEY+JTHQ8VrUqS5lK+0ZbI4oA1IENnTI4HPE291yNyF f5JCZ+Nip7WlXEK1tQ8WqyVrEGhxAcPaGKvr70mgten5MATo6fCSVpevn7aemA8k OumrBZa1Wj8r7EG5xTuv =CkGL -----END PGP SIGNATURE----- -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
