Hi Felipe,
On 8/15/2016 4:02 AM, Felipe Balbi wrote:
> Upon transfer completion after a full ring, let's
> add more TRBs to our ring in order to complete our
> request successfully.
>
> Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
> ---
> drivers/usb/dwc3/gadget.c | 36 ++++++++++++++++++++++++------------
> 1 file changed, 24 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 90b3d7965136..6483991c8013 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -888,14 +888,13 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
> static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
> struct dwc3_request *req, unsigned int trbs_left)
> {
> - struct usb_request *request = &req->request;
> - struct scatterlist *sg = request->sg;
> + struct scatterlist *sg = req->sg;
> struct scatterlist *s;
> unsigned int length;
> dma_addr_t dma;
> int i;
>
> - for_each_sg(sg, s, request->num_mapped_sgs, i) {
> + for_each_sg(sg, s, req->num_pending_sgs, i) {
> unsigned chain = true;
>
> length = sg_dma_len(s);
> @@ -945,7 +944,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
> return;
>
> list_for_each_entry_safe(req, n, &dep->pending_list, list) {
> - if (req->request.num_mapped_sgs > 0)
> + if (req->num_pending_sgs > 0)
> dwc3_prepare_one_trb_sg(dep, req, trbs_left--);
> else
> dwc3_prepare_one_trb_linear(dep, req, trbs_left--);
> @@ -1071,6 +1070,9 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep,
> struct dwc3_request *req)
> if (ret)
> return ret;
>
> + req->sg = req->request.sg;
> + req->num_pending_sgs = req->request.num_mapped_sgs;
> +
> list_add_tail(&req->list, &dep->pending_list);
>
> if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
> @@ -1935,22 +1937,30 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc,
> struct dwc3_ep *dep,
> int ret;
>
> list_for_each_entry_safe(req, n, &dep->started_list, list) {
> -
> + unsigned length;
> + unsigned actual;
> int chain;
>
> - chain = req->request.num_mapped_sgs > 0;
> + length = req->request.length;
> + chain = req->num_pending_sgs > 0;
> if (chain) {
> - struct scatterlist *sg = req->request.sg;
> + struct scatterlist *sg = req->sg;
> struct scatterlist *s;
> + unsigned int pending = req->num_pending_sgs;
> unsigned int i;
>
> - for_each_sg(sg, s, req->request.num_mapped_sgs, i) {
> + for_each_sg(sg, s, pending, i) {
> trb = &dep->trb_pool[dep->trb_dequeue];
> count += trb->size & DWC3_TRB_SIZE_MASK;
> dwc3_ep_inc_deq(dep);
>
> + req->sg = sg_next(s);
> + req->num_pending_sgs--;
> +
> ret = __dwc3_cleanup_done_trbs(dwc, dep, req,
> trb,
> event, status, chain);
> + if (ret)
> + break;
> }
> } else {
> trb = &dep->trb_pool[dep->trb_dequeue];
> @@ -1968,11 +1978,13 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc,
> struct dwc3_ep *dep,
> * should receive and we simply bounce the request back to the
> * gadget driver for further processing.
> */
> - req->request.actual += req->request.length - count;
> - dwc3_gadget_giveback(dep, req, status);
> + actual = length - req->request.actual;
> + req->request.actual = actual;
>
> - if (ret)
> - break;
> + if (ret && chain && (actual < length) && req->num_pending_sgs)
> + return __dwc3_gadget_kick_transfer(dep, 0);
> +
> + dwc3_gadget_giveback(dep, req, status);
> }
>
> /*
> On your testing/next, I see considerable slow down and file corruption in mass storage. After bisecting, this patch seems to be the first one that shows problems. The device fails even enumeration here. I haven't looked in detail at the changes but, do you have any ideas? I have attached driver logs. Regards, John
log.tar.gz
Description: application/gzip
