From: Axel Haslam <ahas...@baylibre.com>
The omap138-lcdk and its predecessor the hawk board don't have gpios
connected to control vbus or get the over current notifications for usb.
for example, in the hawk board gpio6-13 is connected to a LED, and
gpio2-4 is not connected at all. In the lcdk board, gpio 2-4 is a push
button, and gpio6-13 is connected to a LED.
Remove the gpio and interrupt registration for these pins.
Signed-off-by: Axel Haslam <ahas...@baylibre.com>
---
arch/arm/mach-davinci/board-omapl138-hawk.c | 78 +----------------------------
1 file changed, 1 insertion(+), 77 deletions(-)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
b/arch/arm/mach-davinci/board-omapl138-hawk.c
index f9cd388..075be1b 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -28,9 +28,6 @@
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
-#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13)
-
static short omapl138_hawk_mii_pins[] __initdata = {
DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
@@ -181,66 +178,16 @@ static __init void omapl138_hawk_mmc_init(void)
gpio_free(DA850_HAWK_MMCSD_CD_PIN);
}
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
-static da8xx_ocic_handler_t hawk_usb_ocic_handler;
-
static const short da850_hawk_usb11_pins[] = {
DA850_GPIO2_4, DA850_GPIO6_13,
-1
};
-static int hawk_usb_set_power(unsigned port, int on)
-{
- gpio_set_value(DA850_USB1_VBUS_PIN, on);
- return 0;
-}
-
-static int hawk_usb_get_power(unsigned port)
-{
- return gpio_get_value(DA850_USB1_VBUS_PIN);
-}
-
-static int hawk_usb_get_oci(unsigned port)
-{
- return !gpio_get_value(DA850_USB1_OC_PIN);
-}
-
-static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
- int irq = gpio_to_irq(DA850_USB1_OC_PIN);
- int error = 0;
-
- if (handler != NULL) {
- hawk_usb_ocic_handler = handler;
-
- error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
- IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "OHCI over-current indicator", NULL);
- if (error)
- pr_err("%s: could not request IRQ to watch "
- "over-current indicator changes\n", __func__);
- } else {
- free_irq(irq, NULL);
- }
- return error;
-}
-
static struct da8xx_ohci_platform_data omapl138_hawk_usb11_pdata = {
- .set_power = hawk_usb_set_power,
- .get_power = hawk_usb_get_power,
- .get_oci = hawk_usb_get_oci,
- .ocic_notify = hawk_usb_ocic_notify,
/* TPS2087 switch @ 5V */
.potpgt = 3 /* 3 ms max */
};
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
-{
- hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1);
- return IRQ_HANDLED;
-}
-
static __init void omapl138_hawk_usb_init(void)
{
int ret;
@@ -266,34 +213,11 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB PHY registration failed: %d\n",
__func__, ret);
- ret = gpio_request_one(DA850_USB1_VBUS_PIN,
- GPIOF_DIR_OUT, "USB1 VBUS");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "power control: %d\n", __func__, ret);
- return;
- }
-
- ret = gpio_request_one(DA850_USB1_OC_PIN,
- GPIOF_DIR_IN, "USB1 OC");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "over-current indicator: %d\n", __func__, ret);
- goto usb11_setup_oc_fail;
- }
-
ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
- if (ret) {
+ if (ret)
pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
- goto usb11_setup_fail;
- }
return;
-
-usb11_setup_fail:
- gpio_free(DA850_USB1_OC_PIN);
-usb11_setup_oc_fail:
- gpio_free(DA850_USB1_VBUS_PIN);
}
static __init void omapl138_hawk_init(void)
--
2.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
