On Fri, 21 Oct 2016, Sriram Dash wrote:

> For the USB3.0 controller, USB 2.0 reset not driven while
> port is in Resume state. So, do not program the USB 2.0 reset
> (PORTSC[PR]=1) while in Resume state.
> 
> Signed-off-by: Rajat Srivastava <rajat.srivast...@nxp.com>
> Signed-off-by: Sriram Dash <sriram.d...@nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
> ---
>  drivers/usb/host/xhci-hub.c | 28 +++++++++++++++++++++++++++-
>  drivers/usb/host/xhci.h     |  1 +
>  2 files changed, 28 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> index 730b9fd..3def0dd 100644
> --- a/drivers/usb/host/xhci-hub.c
> +++ b/drivers/usb/host/xhci-hub.c
> @@ -878,7 +878,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, 
> u16 wValue,
>       struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>       int max_ports;
>       unsigned long flags;
> -     u32 temp, status;
> +     u32 temp, status, tmp_status = 0;
>       int retval = 0;
>       __le32 __iomem **port_array;
>       int slot_id;
> @@ -1098,6 +1098,32 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, 
> u16 wValue,
>                       spin_lock_irqsave(&xhci->lock, flags);
>                       break;
>               case USB_PORT_FEAT_RESET:
> +                     /*
> +                      * Erratum : A010129
> +                      * Synopsys STAR 9000962562.
> +                      * USB 2.0 Reset Not Driven While Port in Resume
> +                      * While in USB 2.0 resume state (the PORTSC.PLS
> +                      * register bit is set to 4'd15), if the xHCI driver
> +                      * programs the PORTSC.PR register bit to 1, the
> +                      * controller does not drive a USB 2.0 reset
> +                      * and it does not generate a PORTSC.PRC=1 interrupt.
> +                      * So, The xHCI driver should not program a USB
> +                      * 2.0 reset (PORTSC.PR=1) while in resume
> +                      * (PORTSC.PLS=4'd15).
> +                      */
> +                     if (xhci->quirks & XHCI_PORT_RST_ON_RESUME) {

It's always a bad idea to drive a reset signal while a port is 
resuming.  We don't need a quirk flag for this.  The HCD should never 
do it, and the USB core should never tell the HCD to do it.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to