This adds the device tree node for the usb otg controller present in the da850 family of SoC's. This also enables the otg usb controller for the lcdk board.
Signed-off-by: Alexandre Bailon <abai...@baylibre.com> --- arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++ arch/arm/boot/dts/da850.dtsi | 15 +++++++++++++++ 2 files changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 7b8ab21..9f5040c 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -158,6 +158,14 @@ rx-num-evt = <32>; }; +&usb_phy { + status = "okay"; + }; + +&usb0 { + status = "okay"; +}; + &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index f79e1b9..322a31a 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -372,6 +372,21 @@ >; status = "disabled"; }; + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; + status = "disabled"; + }; + usb0: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x200000 0x10000>; + interrupts = <58>; + interrupt-names = "mc"; + dr_mode = "otg"; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; -- 2.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html