This little helper will be used to make sure we're
dealing with a valid Synopsys DWC3 or DWC3.1 core.
Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
---
drivers/usb/dwc3/core.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index fe1ecae73086..3e9515073e05 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -594,19 +594,12 @@ static void dwc3_core_exit(struct dwc3 *dwc)
phy_power_off(dwc->usb3_generic_phy);
}
-/**
- * dwc3_core_init - Low-level initialization of DWC3 Core
- * @dwc: Pointer to our controller context structure
- *
- * Returns 0 on success otherwise negative errno.
- */
-static int dwc3_core_init(struct dwc3 *dwc)
+static bool dwc3_core_is_valid(struct dwc3 *dwc)
{
- u32 hwparams4 = dwc->hwparams.hwparams4;
- u32 reg;
- int ret;
+ u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
+
/* This should read as U3 followed by revision number */
if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) {
/* Detected DWC_usb3 IP */
@@ -616,6 +609,25 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
dwc->revision |= DWC3_REVISION_IS_DWC31;
} else {
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * dwc3_core_init - Low-level initialization of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int dwc3_core_init(struct dwc3 *dwc)
+{
+ u32 hwparams4 = dwc->hwparams.hwparams4;
+ u32 reg;
+ int ret;
+
+ if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
