From: Felipe Balbi <ba...@ti.com>
dwc3 revisions <=3.00a have a limitation where Port Disable command
doesn't work. Set the quirk-broken-port-ped property for such
controllers so XHCI core can do the necessary workaround.
[rog...@ti.com] Updated code from platform data to device property.
Signed-off-by: Felipe Balbi <ba...@ti.com>
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/usb/dwc3/host.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index f6533c6..626d87d 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -21,11 +21,12 @@
int dwc3_host_init(struct dwc3 *dwc)
{
- struct property_entry props[2];
+ struct property_entry props[3];
struct platform_device *xhci;
int ret, irq;
struct resource *res;
struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+ int prop_idx = 0;
irq = platform_get_irq_byname(dwc3_pdev, "host");
if (irq == -EPROBE_DEFER)
@@ -89,8 +90,22 @@ int dwc3_host_init(struct dwc3 *dwc)
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
- if (dwc->usb3_lpm_capable) {
- props[0].name = "usb3-lpm-capable";
+ if (dwc->usb3_lpm_capable)
+ props[prop_idx++].name = "usb3-lpm-capable";
+
+ /**
+ * WORKAROUND: dwc3 revisions <=3.00a have a limitation
+ * where Port Disable command doesn't work.
+ *
+ * The suggested workaround is that we avoid Port Disable
+ * completely.
+ *
+ * This following flag tells XHCI to do just that.
+ */
+ if (dwc->revision <= DWC3_REVISION_300A)
+ props[prop_idx++].name = "quirk-broken-port-ped";
+
+ if (prop_idx) {
ret = platform_device_add_properties(xhci, props);
if (ret) {
dev_err(dwc->dev, "failed to add properties to xHCI\n");
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
