From: Hans de Goede <hdego...@redhat.com>
The sunxi musb has a bug where sometimes it will generate a babble
error on device disconnect instead of a disconnect irq. When this
happens the musb-controller switches from host mode to device mode
(it clears MUSB_DEVCTL_SESSION and sets MUSB_DEVCTL_BDEVICE) and
gets stuck in this state.
Clearing this requires reporting Vbus low for 200 or more ms, but
on some devices Vbus is simply always high (host-only mode, no Vbus
control).
This commit adds a sunxi_musb_recover() callback which makes
sunxi_musb_work call phy_set_mode with the current mode, which
will force end the current session.
This fixes the musb controller getting stuck in this state on systems
without Vbus control; and also fixes the need to unplug the usb-b ->
usb-a cable to get out of this state on systems with Vbus control.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Bin Liu <b-...@ti.com>
---
drivers/usb/musb/sunxi.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 82eba92284c0..d0be0eadd0d9 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -380,6 +380,20 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
return 0;
}
+static int sunxi_musb_recover(struct musb *musb)
+{
+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+ /*
+ * Schedule a phy_set_mode with the current glue->phy_mode value,
+ * this will force end the current session.
+ */
+ set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags);
+ schedule_work(&glue->work);
+
+ return 0;
+}
+
/*
* sunxi musb register layout
* 0x00 - 0x17 fifo regs, 1 long per fifo
@@ -608,6 +622,7 @@ static void sunxi_musb_writew(void __iomem *addr, unsigned
offset, u16 data)
.dma_init = sunxi_musb_dma_controller_create,
.dma_exit = sunxi_musb_dma_controller_destroy,
.set_mode = sunxi_musb_set_mode,
+ .recover = sunxi_musb_recover,
.set_vbus = sunxi_musb_set_vbus,
.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
.post_root_reset_end = sunxi_musb_post_root_reset_end,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
