The private baud_rate variable is used to configure the port at open and
reset-resume, which means it must never be set to (and left at) zero or
reset-resume and all further open attempts will fail.
Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <sta...@vger.kernel.org>
Signed-off-by: Johan Hovold <jo...@kernel.org>
---
drivers/usb/serial/ch341.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index d133e72fe888..6279df905c14 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -355,7 +355,6 @@ static void ch341_set_termios(struct tty_struct *tty,
baud_rate = tty_get_baud_rate(tty);
- priv->baud_rate = baud_rate;
ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
switch (C_CSIZE(tty)) {
@@ -388,6 +387,9 @@ static void ch341_set_termios(struct tty_struct *tty,
spin_lock_irqsave(&priv->lock, flags);
priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
spin_unlock_irqrestore(&priv->lock, flags);
+
+ priv->baud_rate = baud_rate;
+
r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
if (r < 0 && old_termios) {
priv->baud_rate = tty_termios_baud_rate(old_termios);
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
