Now that finish_td() is the only place calling
xhci_requires_manual_halt_cleanup() we can remove that function and use
that to cleanup finish_td() by converting it into a switch statement
using trb_comp_code.
Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 59 +++++++++++++++++++-------------------------
1 file changed, 25 insertions(+), 34 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 872b9af70f33..b74c27b8e110 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1773,32 +1773,6 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd
*xhci,
xhci_ring_cmd_db(xhci);
}
-/* Check if an error has halted the endpoint ring. The class driver will
- * cleanup the halt for a non-default control endpoint if we indicate a stall.
- * However, a babble and other errors also halt the endpoint ring, and the
class
- * driver won't clear the halt in that case, so we need to issue a Set Transfer
- * Ring Dequeue Pointer command manually.
- */
-static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
- struct xhci_ep_ctx *ep_ctx,
- unsigned int trb_comp_code)
-{
- /* TRB completion codes that may require a manual halt cleanup */
- if (trb_comp_code == COMP_USB_TRANSACTION_ERROR ||
- trb_comp_code == COMP_BABBLE_DETECTED_ERROR ||
- trb_comp_code == COMP_SPLIT_TRANSACTION_ERROR)
- /* The 0.95 spec says a babbling control endpoint
- * is not halted. The 0.96 spec says it is. Some HW
- * claims to be 0.95 compliant, but it halts the control
- * endpoint anyway. Check if a babble halted the
- * endpoint.
- */
- if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_HALTED)
- return 1;
-
- return 0;
-}
-
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
{
if (trb_comp_code >= 224 && trb_comp_code <= 255) {
@@ -1840,19 +1814,35 @@ static int finish_td(struct xhci_hcd *xhci, struct
xhci_td *td,
if (skip)
goto td_cleanup;
- if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
- trb_comp_code == COMP_STOPPED ||
- trb_comp_code == COMP_STOPPED_SHORT_PACKET) {
+ switch (trb_comp_code) {
+ case COMP_STOPPED_LENGTH_INVALID:
+ case COMP_STOPPED:
+ case COMP_STOPPED_SHORT_PACKET:
/* The Endpoint Stop Command completion will take care of any
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
*/
ep->stopped_td = td;
return 0;
- }
- if (trb_comp_code == COMP_STALL_ERROR ||
- xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
- trb_comp_code)) {
+ case COMP_USB_TRANSACTION_ERROR:
+ case COMP_BABBLE_DETECTED_ERROR:
+ case COMP_SPLIT_TRANSACTION_ERROR:
+ /* Check if an error has halted the endpoint ring. The class
+ * driver will cleanup the halt for a non-default control
+ * endpoint if we indicate a stall. However, a babble and other
+ * errors also halt the endpoint ring, and the class driver
+ * won't clear the halt in that case, so we need to issue a Set
+ * Transfer Ring Dequeue Pointer command manually.
+ *
+ * Note that the 0.95 spec says a babbling control endpoint is
+ * not halted. The 0.96 spec says it is. Some HW claims to be
+ * 0.95 compliant, but it halts the control endpoint anyway.
+ * Check if a babble halted the endpoint.
+ */
+ if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_HALTED)
+ break;
+ /* FALLTHROUGH */
+ case COMP_STALL_ERROR:
/* Issue a reset endpoint command to clear the host side
* halt, followed by a set dequeue command to move the
* dequeue pointer past the TD.
@@ -1860,7 +1850,8 @@ static int finish_td(struct xhci_hcd *xhci, struct
xhci_td *td,
*/
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, ep_trb);
- } else {
+ break;
+ default:
/* Update ring dequeue pointer */
while (ep_ring->dequeue != td->last_trb)
inc_deq(xhci, ep_ring);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
