From: Cristian Birsan <cristian.bir...@microchip.com> Update atmel udc driver with a new enpoint allocation scheme. The data sheet requires that all endpoints are allocated in order.
Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com> --- drivers/usb/gadget/udc/Kconfig | 14 ++ drivers/usb/gadget/udc/atmel_usba_udc.c | 236 +++++++++++++++++++++++++++----- drivers/usb/gadget/udc/atmel_usba_udc.h | 10 +- 3 files changed, 227 insertions(+), 33 deletions(-) diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 658b8da..4b69f28 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -60,6 +60,20 @@ config USB_ATMEL_USBA USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. + The fifo_mode parameter is used to select endpoint allocation mode. + fifo_mode = 0 is used to let the driver autoconfigure the endpoints. + In this case 2 banks are allocated for isochronous endpoints and + only one bank is allocated for the rest of the endpoints. + + fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration + allowing the usage of ep1 - ep6 + + fifo_mode = 2 is a generic performance maximum fifo size (1024 bytes) + configuration allowing the usage of ep1 - ep3 + + fifo_mode = 3 is a balanced performance configuration allowing the + the usage of ep1 - ep8 + config USB_BCM63XX_UDC tristate "Broadcom BCM63xx Peripheral Controller" depends on BCM63XX diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 12c7687..3417bb9 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -20,6 +20,7 @@ #include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <linux/regmap.h> +#include <linux/ctype.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/atmel_usba_udc.h> @@ -318,6 +319,91 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc) } #endif +static ushort fifo_mode; + +/* "modprobe ... fifo_mode=1" etc */ +module_param(fifo_mode, ushort, 0x0); +MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode"); + +/* mode 0 - uses autoconfig */ + +/* mode 1 - fits in 8KB, generic max fifo configuration */ +static struct usba_fifo_cfg mode_1_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 4, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 5, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 6, .fifo_size = 1024, .nr_banks = 1, }, +}; + +/* mode 2 - fits in 8KB, performance max fifo configuration */ +static struct usba_fifo_cfg mode_2_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 3, }, +{ .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 2, }, +}; + +/* mode 3 - fits in 8KB, mixed fifo configuration */ +static struct usba_fifo_cfg mode_3_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 6, .fifo_size = 512, .nr_banks = 2, }, +}; + +/* mode 4 - fits in 8KB, custom fifo configuration */ +static struct usba_fifo_cfg mode_4_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 8, .nr_banks = 2, }, +{ .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 6, .fifo_size = 16, .nr_banks = 2, }, +{ .hw_ep_num = 7, .fifo_size = 8, .nr_banks = 2, }, +{ .hw_ep_num = 8, .fifo_size = 8, .nr_banks = 2, }, +}; +/* Add additional configurations here */ + +int usba_config_fifo_table(struct usba_udc *udc) +{ + int n; + + switch (fifo_mode) { + default: + fifo_mode = 0; + case 0: + udc->fifo_cfg = NULL; + n = 0; + break; + case 1: + udc->fifo_cfg = mode_1_cfg; + n = ARRAY_SIZE(mode_1_cfg); + break; + case 2: + udc->fifo_cfg = mode_2_cfg; + n = ARRAY_SIZE(mode_2_cfg); + break; + case 3: + udc->fifo_cfg = mode_3_cfg; + n = ARRAY_SIZE(mode_3_cfg); + break; + case 4: + udc->fifo_cfg = mode_4_cfg; + n = ARRAY_SIZE(mode_4_cfg); + break; + } + DBG(DBG_HW, "Setup fifo_mode %d\n", fifo_mode); + + return n; +} + static inline u32 usba_int_enb_get(struct usba_udc *udc) { return udc->int_enb_cache; @@ -543,24 +629,17 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) ep->is_isoc = 0; ep->is_in = 0; - if (maxpacket <= 8) - ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); - else - /* LSB is bit 1, not 0 */ - ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3); - - DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n", + DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n", ep->ep.name, ept_cfg, maxpacket); if (usb_endpoint_dir_in(desc)) { ep->is_in = 1; - ept_cfg |= USBA_EPT_DIR_IN; + ep->ept_cfg |= USBA_EPT_DIR_IN; } switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: - ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL); - ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE); + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL); break; case USB_ENDPOINT_XFER_ISOC: if (!ep->can_isoc) { @@ -578,24 +657,15 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) return -EINVAL; ep->is_isoc = 1; - ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO); + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO); + ep->ept_cfg |= USBA_BF(NB_TRANS, nr_trans); - /* - * Do triple-buffering on high-bandwidth iso endpoints. - */ - if (nr_trans > 1 && ep->nr_banks == 3) - ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE); - else - ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE); - ept_cfg |= USBA_BF(NB_TRANS, nr_trans); break; case USB_ENDPOINT_XFER_BULK: - ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK); - ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE); + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK); break; case USB_ENDPOINT_XFER_INT: - ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT); - ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE); + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT); break; } @@ -604,7 +674,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; - usba_ep_writel(ep, CFG, ept_cfg); + usba_ep_writel(ep, CFG, ep->ept_cfg); usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); if (ep->can_dma) { @@ -1006,12 +1076,81 @@ static int atmel_usba_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int atmel_usba_stop(struct usb_gadget *gadget); +static struct usb_ep *atmel_usba_match_ep( + struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp +) +{ + struct usb_ep *_ep; + struct usba_ep *ep; + + /* Look at endpoints until an unclaimed one looks usable */ + list_for_each_entry(_ep, &gadget->ep_list, ep_list) { + if (usb_gadget_ep_match_desc(gadget, _ep, desc, ep_comp)) + goto found_ep; + } + /* Fail */ + return NULL; + +found_ep: + + if (fifo_mode == 0) { + /* Optimize hw fifo size based on ep type and other info */ + ep = to_usba_ep(_ep); + + switch (usb_endpoint_type(desc)) { + + case USB_ENDPOINT_XFER_CONTROL: + break; + + case USB_ENDPOINT_XFER_ISOC: + ep->fifo_size = 1024; + ep->nr_banks = 2; + break; + + case USB_ENDPOINT_XFER_BULK: + ep->fifo_size = 512; + ep->nr_banks = 1; + break; + + case USB_ENDPOINT_XFER_INT: + if (desc->wMaxPacketSize == 0) + ep->fifo_size = + roundup_pow_of_two(_ep->maxpacket_limit); + else + ep->fifo_size = + roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize)); + ep->nr_banks = 1; + break; + } + + /* It might be a little bit late to set this */ + usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size); + + /* Generate ept_cfg basd on FIFO size and number of banks */ + if (ep->fifo_size <= 8) + ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ep->ept_cfg = + USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); + + ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); + + ep->udc->configured_ep++; + } + +return _ep; +} + static const struct usb_gadget_ops usba_udc_ops = { .get_frame = usba_udc_get_frame, .wakeup = usba_udc_wakeup, .set_selfpowered = usba_udc_set_selfpowered, .udc_start = atmel_usba_start, .udc_stop = atmel_usba_stop, + .match_ep = atmel_usba_match_ep, }; static struct usb_endpoint_descriptor usba_ep0_desc = { @@ -1678,7 +1817,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) } if (status & USBA_END_OF_RESET) { - struct usba_ep *ep0; + struct usba_ep *ep0, *ep; + int i, n; usba_writel(udc, INT_CLR, USBA_END_OF_RESET); generate_bias_pulse(udc); @@ -1717,6 +1857,16 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED)) dev_dbg(&udc->pdev->dev, "ODD: EP0 configuration is invalid!\n"); + + /* Preallocate other endpoints */ + n = fifo_mode ? udc->num_ep : udc->configured_ep; + for (i = 1; i < n; i++) { + ep = &udc->usba_ep[i]; + usba_ep_writel(ep, CFG, ep->ept_cfg); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) + dev_dbg(&udc->pdev->dev, + "ODD: EP%d configuration is invalid!\n", i); + } } spin_unlock(&udc->lock); @@ -1864,6 +2014,9 @@ static int atmel_usba_stop(struct usb_gadget *gadget) if (gpio_is_valid(udc->vbus_pin)) disable_irq(gpio_to_irq(udc->vbus_pin)); + if (fifo_mode == 0) + udc->configured_ep = 1; + usba_stop(udc); udc->driver = NULL; @@ -1931,9 +2084,13 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, &flags); udc->vbus_pin_inverted = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; - pp = NULL; - while ((pp = of_get_next_child(np, pp))) - udc->num_ep++; + if (fifo_mode == 0) { + pp = NULL; + while ((pp = of_get_next_child(np, pp))) + udc->num_ep++; + udc->configured_ep = 1; + } else + udc->num_ep = usba_config_fifo_table(udc); eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep, GFP_KERNEL); @@ -1946,7 +2103,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, pp = NULL; i = 0; - while ((pp = of_get_next_child(np, pp))) { + while ((pp = of_get_next_child(np, pp)) && i < udc->num_ep) { ep = &eps[i]; ret = of_property_read_u32(pp, "reg", &val); @@ -1954,21 +2111,21 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret); goto err; } - ep->index = val; + ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : val; ret = of_property_read_u32(pp, "atmel,fifo-size", &val); if (ret) { dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret); goto err; } - ep->fifo_size = val; + ep->fifo_size = fifo_mode ? udc->fifo_cfg[i].fifo_size : val; ret = of_property_read_u32(pp, "atmel,nb-banks", &val); if (ret) { dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret); goto err; } - ep->nr_banks = val; + ep->nr_banks = fifo_mode ? udc->fifo_cfg[i].nr_banks : val; ep->can_dma = of_property_read_bool(pp, "atmel,can-dma"); ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc"); @@ -2000,6 +2157,21 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, ep->ep.caps.dir_in = true; ep->ep.caps.dir_out = true; + if (fifo_mode != 0) { + /* + * Generate ept_cfg based on FIFO size and + * banks number + */ + if (ep->fifo_size <= 8) + ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ep->ept_cfg = + USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); + + ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); + } + if (i) list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index b03b2eb..9551b70 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -275,6 +275,12 @@ struct usba_dma_desc { u32 ctrl; }; +struct usba_fifo_cfg { + u8 hw_ep_num; + u16 fifo_size; + u8 nr_banks; +}; + struct usba_ep { int state; void __iomem *ep_regs; @@ -293,7 +299,7 @@ struct usba_ep { unsigned int can_isoc:1; unsigned int is_isoc:1; unsigned int is_in:1; - + unsigned long ept_cfg; #ifdef CONFIG_USB_GADGET_DEBUG_FS u32 last_dma_status; struct dentry *debugfs_dir; @@ -338,6 +344,8 @@ struct usba_udc { int vbus_pin; int vbus_pin_inverted; int num_ep; + int configured_ep; + struct usba_fifo_cfg *fifo_cfg; struct clk *pclk; struct clk *hclk; struct usba_ep *usba_ep; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html