From: Cristian Birsan <cristian.bir...@microchip.com>
Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com>
---
Fixes since previous patch:
- Fix coding style
- Validate parameters againsta device tree values
- Update error message display
- Update Kconfig comments
drivers/usb/gadget/udc/Kconfig | 5 ++--
drivers/usb/gadget/udc/atmel_usba_udc.c | 48 ++++++++++++++++++++++-----------
2 files changed, 36 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 4b69f28..6a991b7 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -62,8 +62,9 @@ config USB_ATMEL_USBA
The fifo_mode parameter is used to select endpoint allocation mode.
fifo_mode = 0 is used to let the driver autoconfigure the endpoints.
- In this case 2 banks are allocated for isochronous endpoints and
- only one bank is allocated for the rest of the endpoints.
+ In this case 2 banks are allocated so that they could be use as
+ isochronous endpoints and only one bank is allocated for the rest
+ of the endpoints.
fifo_mode = 1 is a generic maximum fifo size (1024 bytes)
configuration
allowing the usage of ep1 - ep6
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c
b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 11bbce2..37f71e5 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -321,7 +321,6 @@ static inline void usba_cleanup_debugfs(struct usba_udc
*udc)
static ushort fifo_mode;
-/* "modprobe ... fifo_mode=1" etc */
module_param(fifo_mode, ushort, 0x0);
MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode");
@@ -369,9 +368,10 @@ static struct usba_fifo_cfg mode_4_cfg[] = {
{ .hw_ep_num = 7, .fifo_size = 8, .nr_banks = 2, },
{ .hw_ep_num = 8, .fifo_size = 8, .nr_banks = 2, },
};
+
/* Add additional configurations here */
-int usba_config_fifo_table(struct usba_udc *udc)
+static int usba_config_fifo_table(struct usba_udc *udc)
{
int n;
@@ -1076,11 +1076,9 @@ static int atmel_usba_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
static int atmel_usba_stop(struct usb_gadget *gadget);
-static struct usb_ep *atmel_usba_match_ep(
- struct usb_gadget *gadget,
- struct usb_endpoint_descriptor *desc,
- struct usb_ss_ep_comp_descriptor *ep_comp
-)
+static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
{
struct usb_ep *_ep;
struct usba_ep *ep;
@@ -1100,7 +1098,6 @@ static struct usb_ep *atmel_usba_match_ep(
ep = to_usba_ep(_ep);
switch (usb_endpoint_type(desc)) {
-
case USB_ENDPOINT_XFER_CONTROL:
break;
@@ -1141,7 +1138,7 @@ static struct usb_ep *atmel_usba_match_ep(
ep->udc->configured_ep++;
}
-return _ep;
+ return _ep;
}
static const struct usb_gadget_ops usba_udc_ops = {
@@ -1855,7 +1852,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
* but it's clearly harmless...
*/
if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
- dev_dbg(&udc->pdev->dev,
+ dev_warn(&udc->pdev->dev,
"ODD: EP0 configuration is invalid!\n");
/* Preallocate other endpoints */
@@ -1864,8 +1861,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
ep = &udc->usba_ep[i];
usba_ep_writel(ep, CFG, ep->ept_cfg);
if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
- dev_dbg(&udc->pdev->dev,
- "ODD: EP%d configuration is invalid!\n", i);
+ dev_warn(&udc->pdev->dev,
+ "ODD: EP%d configuration is
invalid!\n", i);
}
}
@@ -2089,8 +2086,9 @@ static struct usba_ep * atmel_udc_of_init(struct
platform_device *pdev,
while ((pp = of_get_next_child(np, pp)))
udc->num_ep++;
udc->configured_ep = 1;
- } else
+ } else {
udc->num_ep = usba_config_fifo_table(udc);
+ }
eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep,
GFP_KERNEL);
@@ -2118,14 +2116,34 @@ static struct usba_ep * atmel_udc_of_init(struct
platform_device *pdev,
dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n",
ret);
goto err;
}
- ep->fifo_size = fifo_mode ? udc->fifo_cfg[i].fifo_size : val;
+ if (fifo_mode) {
+ if (val < udc->fifo_cfg[i].fifo_size) {
+ dev_warn(&pdev->dev,
+ "of_probe: using fifo-size from DT
instead of table\n");
+ ep->fifo_size = val;
+ } else {
+ ep->fifo_size = udc->fifo_cfg[i].fifo_size;
+ }
+ } else {
+ ep->fifo_size = val;
+ }
ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
if (ret) {
dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n",
ret);
goto err;
}
- ep->nr_banks = fifo_mode ? udc->fifo_cfg[i].nr_banks : val;
+ if (fifo_mode) {
+ if (val < udc->fifo_cfg[i].nr_banks) {
+ dev_warn(&pdev->dev,
+ "of_probe: using nb-banks from DT
instead of table\n");
+ ep->nr_banks = val;
+ } else {
+ ep->nr_banks = udc->fifo_cfg[i].nr_banks;
+ }
+ } else {
+ ep->nr_banks = val;
+ }
ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
