On Tue, Feb 21, 2017 at 05:13:03PM +0530, Raviteja Garimella wrote: > The device node is used for UDCs integrated into Broadcom's > iProc family of SoCs'. The UDC is based on Synopsys Designware > Cores AHB Subsystem USB Device Controller IP.
For subject: dt-bindings: usb: Add Broadcom IPROC USB Device controller > > Signed-off-by: Raviteja Garimella <raviteja.garime...@broadcom.com> > --- > Documentation/devicetree/bindings/usb/iproc-udc.txt | 21 > +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/iproc-udc.txt > > diff --git a/Documentation/devicetree/bindings/usb/iproc-udc.txt > b/Documentation/devicetree/bindings/usb/iproc-udc.txt > new file mode 100644 > index 0000000..c2ce803 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/iproc-udc.txt > @@ -0,0 +1,21 @@ > +Broadcom IPROC USB Device controller. > + > +The device node is used for UDCs integrated into Broadcom's > +iProc family (Northstar2, Cygnus) of SoCs'. The UDC is based > +on Synopsys Designware Cores AHB Subsystem Device Controller > +IP. > + > +Required properties: > + - compatible: Add the compatibility strings for supported platforms. > + For Broadcom NS2 platform, add "brcm,ns2-udc". > + For Broadcom Cygnus platform, add "brcm,cygnus-udc". > + - reg: Offset and length of UDC register set > + - interrupts: description of interrupt line > + - phys: phandle to phy node. > + > +Example: > + udc_dwc: usb@664e0000 { > + compatible = "brcm,ns2-udc", "brcm,cygnus-udc"; This doesn't look right? > + reg = <0x664e0000 0x2000>; > + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usbdrd_phy>; > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html