From: Cristian Birsan <cristian.bir...@microchip.com> Update Kconfig help for fifo_mode = 0 to explain the behavior better.
Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com> --- drivers/usb/gadget/udc/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index c6cc9d3..1fd3fe9 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -62,8 +62,9 @@ config USB_ATMEL_USBA The fifo_mode parameter is used to select endpoint allocation mode. fifo_mode = 0 is used to let the driver autoconfigure the endpoints. - In this case 2 banks are allocated for isochronous endpoints and - only one bank is allocated for the rest of the endpoints. + In this case, for ep1 2 banks are allocated if it works in isochronous + mode and only 1 bank otherwise. For the rest of the endpoints + only 1 bank is allocated. fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration allowing the usage of ep1 - ep6 -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html