[PATCH v4 4/9] usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program

[Peter Ujfalusi]

Having one musb_ep_select() instead the two calls in if/else is the same
thing, but makes the code a bit simpler to follow.

Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
Tested-by: Tony Lindgren <t...@atomide.com>
---
 drivers/usb/musb/tusb6010_omap.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 7870b37e0ea5..025b52e0b34d 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -368,15 +368,14 @@ static int tusb_omap_dma_program(struct dma_channel 
*channel, u16 packet_sz,
        /*
         * Prepare MUSB for DMA transfer
         */
+       musb_ep_select(mbase, chdat->epnum);
        if (chdat->tx) {
-               musb_ep_select(mbase, chdat->epnum);
                csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
                csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
                        | MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
                csr &= ~MUSB_TXCSR_P_UNDERRUN;
                musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
        } else {
-               musb_ep_select(mbase, chdat->epnum);
                csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
                csr |= MUSB_RXCSR_DMAENAB;
                csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
-- 
2.13.0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html