On Tue, 23 May 2017, Benjamin Herrenschmidt wrote: > The Aspeed 2400/2500 families have a variant of UHCI which requires > some quirks to the driver to work: > > - The register offsets are different. We add a remapping helper. > > - All accesses have to be done via 32-bit loads and stores. We > force all accessors to use readl/writel. This is of no consequence > for reads as we never read "in the middle" of a register. For writes > it also works fine as the registers only actually implement the bits > we try to write (16-bit for the registers accessed with writew and > 8-bit for the register accessed with writeb), so always using a > 32-bit write will have no negative effect. We never do partial writes. > > - The resume detect interrupt is broken > > - The number of ports is (optionally) provided via the device-tree > > Signed-off-by: Benjamin Herrenschmidt <b...@kernel.crashing.org> > -- > > v2. Remove the bulk of the #ifdef's > > drivers/usb/host/Kconfig | 6 ++++- > drivers/usb/host/uhci-hcd.c | 17 +++++++++++--- > drivers/usb/host/uhci-hcd.h | 51 > ++++++++++++++++++++++++++++++++++++++++ > drivers/usb/host/uhci-platform.c | 22 ++++++++++++++++- > 4 files changed, 91 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 6361fc7..dab8a93 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -627,7 +627,11 @@ config USB_UHCI_SUPPORT_NON_PCI_HC > > config USB_UHCI_PLATFORM > bool > - default y if ARCH_VT8500 > + default y if (ARCH_VT8500 || ARCH_ASPEED) > + > +config USB_UHCI_ASPEED > + bool > + default y if ARCH_ASPEED
Does this new symbol really add anything? I mean, wouldn't it be just as good to use CONFIG_ARCH_ASPEED instead? It gets used in only one place. Aside from that, this looks very good. Acked-by: Alan Stern <st...@rowland.harvard.edu> Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html